To avoid race conditions where BA window size can change, always
flush entire REO descriptor from HW cache irrespective of current
BA window size.
Change-Id: I608996722e7dc2dc6acfd145b8c190b58ce09822
CRs-Fixed: 2251811
- Support to pass IPA enabled(disabled) flag from ini to DP layer
- Use ioremap call to translate tx_comp_doorbell_paddr obtained from
calling ipa_setup api to tx_comp_doorbell_vaddr. This is needed to
write the initial value of HP at the doorbell address.
- Change REO_DST_RING_SIZE and WLAN_CFG_TX_RING_SIZE to 1023
for napier/hastings if IPA is enabled. This is needed because,
ipa_setup API can handle only 16-bit values for the size param(bytes)
of the ring.
- Disable hash based flow steering for SAP peers in case IPA is enabled
and set default reo_dest_ring_4 as default RX ring. Since IPA will be
reaping RX packets from reo_dest_ring_4 only, flow steering is not
needed for SAP peers.
- Unmap pre-allocated TX buffers for IPA in the TX completion ring.
- Donot execute IPA functionality if IPA is disabled from ini.
Change-Id: I6855bfe293a457ccc0abd1ad5567f5c95232a9d2
CRs-Fixed: 2183519
So far, only HE_TRIG packet type parsing is supported for TB-PPDU
(OFDMA UL)frames, which is not enough for plugfest tests. Add all
radiotap dissecting from HE Data 1 to HE Data 6
CRs-Fixed: 2316408
Change-Id: I49d91d4981291827b20f325d459fd1e60f3cc271
Functions hal_rx_wbm_err_info_get, hal_tx_comp_get_release_reason,
hal_rx_dump_mpdu_start_tlv uses some hardware macros directly and the
value differs between qca8074v1 and qca8074v2 targets.
Move these functions to generic api file and compile it per target.
Change-Id: Ib78fb6e69238577aac64da3f60f38a72cee316b0
keep hal tx and rx functions grouped as it will look clean
and avoid confusions while browsing code for others.
Change-Id: I519690d42cd077689bf7afe697908f43d7055da5
Do null check before servicing the ring. When dp_service_srngs()
is common API which gets called when interrupt gets fired for
any ring. Within this API, driver goes one by one to each ring
and service the rings as it is not obvious from interrupt line that
which particular service ring needs to be served.
So race happens when rings are getting initialized and packet has been
arrived to one of the rings. Due to dp_service_srngs() API's
implementation, driver goes to one by one each ring without checking
if all rings are initialized.
CRs-Fixed: 2310496
Change-Id: I3c8f668756c8d266abe082e8473d54cb4df9065e
Instead of frame control info valid parameter data sequence
control parameter was passed, corrected it
Change-Id: Iccaeb286c1003cbb58c5ebcacf4b0d99c979cbbc
- Change the SR mapping address for QCA6390
- Use ring direction field from HAL ring config instead of HAL ring
directly as ring is not yet initialized here.
Change-Id: I900b2329367cc02ae2f9d7f164e5f867d8253d90
CRs-Fixed: 2299919
1. Disable host processing of REO2SW4 when IPA is enabled.
2. Change buffer memory location provide to IPA TX transfer
ring from consistent to non-consistent memory.
Change-Id: Ibb62d9faf5dc9adb5ee8a2e113d10a2912269cbd
CRs-Fixed: 2315889
CE service file includes APIs for both legacy and lithium
architecture.
These are getting compiled for both targets today. Separate the CE
services into legacy and srng and selectively compile based on
targets present in the SoC.
Note: Generic APIs implemented for both legacy and SRNG services
are separated out through this change. Fast path implementation
will be de-coupled from common service and moved to legacy source
in a follow-up change.
CRs-Fixed: 2258640
Change-Id: If86c21c0bf560a360474c9efcdbcd4841a09828d
For HE case, SGI enum values are different in FW and Host
So that firmware stats and host stats shows different values
To resolve this, change SGI enum value in host to match
firmware definitions.
Change-Id: I1b38dbe32a6c1ab2610c1c3a736a6898ddc73e30
Rx reception type for packet was populated from
wrong TLV. Populate reception type based on
HT,VHT or HE TLV tags
Change-Id: I3240a9f029b0bfeee8833761531e086bc5df6f91
HE format in radiotap header are not being updated for HE_TRIG
frames. Add support for it. This is to support MU-OFDMA frames of
UL.
CRs-Fixed: 2223635
Change-Id: If0a93f6047185bcc51948b613d48d13ecb5e16cd
Set monitor direct filter when smart monitor is
enabled. Deliver header from NAC if md bit is set
and smart mesh feature is used.
Change-Id: If1ef865e013c21bbb58bcb89a87856b12d6c7278
Crs-fixed: 2246660
Some of the macro names defined in qca8074v1, are defined with
a slightly different name in qca8074v2, and few macros have the
same name in both headers but are defined with different values.
Fixed the same.
Change-Id: I5e948baf5326d1d8fdfa2bd7ee8aa072c710d17c
Set 'need_status' while sending REO queue update command
for deleting REO queues to get status from HW, which will
trigger callback to cleanup and free the queues.
Also fix issue in initializing REO command descriptor, causing
command number to be cleared.
Change-Id: Ie30fc80f76d835e239dd0b3d3e78c7f32bfa09a4
NDP is a preamble only PPDU, which do not have payload information
from RXDMA destination ring. The detailed TLV sequence is:
* RSSI legcy
* LSIG_A
* HE_SIGA_SU
* RSSI_HT
* GENERATED_CBF_DETAILS
* PKT_END
CRs-Fixed: 2296348
Change-Id: I19f253c65969b59947bd9a21cf3912b16eb21324
When a ppdu id on a ppdu in status ring find a matching ppdu id
in destination ring. The old logic can cause ppdu id is destination
ring stuck on high value before wrap around. The new logic check
ppdu id between status ring and destination ring is no more than
20000.
Change-Id: Ia601403b0a4fc6cdfff980c7745e055c814137b7
Upon receiving 2k jump exception, send delba
and track delba tx status and retries.
Change-Id: Ida35256233869dfa390c40030c9296b9c48481ce
Crs-fixed: 2239856
Add the following fields in Radiotap header:
Antenna noise (in dBM)
Vendor Namespace containing the following information
->L_SIG_A
->Device_ID
->L_SIG_B
->PPDU_START_TIMESTAMP
CRs-Fixed: 2285143
Change-Id: I977be73778ab27383f12214c73b56c9b80d9f02d
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
There are some particular PPDUs which have preamble only:
* NDP frames
* TB_PPDU frames
Add support to the above frames.
Change-Id: I7022433d3765575eaf28d7baf3a11e8b6ce13890
CRs-Fixed: 2275161
1. Allocate and Initialize host and target copy engine configuration
for QCA6390 based products.
2. Setup Copy engine service map for QCA6390.
3. Add conditional compilation flag QCA_WIFI_QCA6390 to support
QCA6390 based products.
Change-Id: Ia4dd4d436b8ecae0e9f91faa0c1fe7dbd14f001f
CRs-Fixed: 2259312
ba_window_size_valid and ba_window size support is missing
while sending wmi_peer_reorder_queue_setup. This is needed
for handing 256 BA which is not FW default.
Change-Id: I3218921c48c0f82225b7992076e73ac0acf7bd11
CRs-fixed: 2285423
Populate the RSSI value for the non associated clients
added in pdev->neighbour_peers_list from monitor status
ring
Change-Id: I509d06bec6eafe8377681c8a3da9a64f301c3c73
CRs-fixed: 2286571
Removed qdf exports on functions defined in target specific
header files and defined those functions as static. Revert
changes on hal_rx_msdu_end_sa_idx_get and make
hal_rx_msdu_end_da_idx_get target specific
Change-Id: I2858b1d77118f0a26b54bf983bd342c7a4fe757d
implement qca6390 target specific hal_rx_msdu_end_sa_idx_get,
hal_rx_dump_msdu_end_tlv as these routines differs a bit from
rest of the lithium chipsets. this target specific function
will be called through callbacks
Change-Id: I4b71da2d39217c2920597fb36c936218359e6c3a
make hal_rx_msdu_end_sa_idx_get and hal_rx_dump_msdu_end_tlv
routines target specific as qca6390 implementation differs
a bit. add target specific functions for qca6290 and qca8074
Change-Id: Ie05b91d965bae3642e3264620c6d8427ad368044
hal_hw_srng table and register offsets array, some target specific
functions are defined separately for each new target.
define the same for qca6290.
Change-Id: I08c1243bc50460fac776e28186acfa192fb1ff66
macros and fw cmn headers included in hal_internal.h is moved
to a new hal_hw_headers.h to avoid these getting included in hif
layer. Include the new hal_hw_headers.h file
Change-Id: I3390ae9e71ca561d94a265e1fdf4d9354e7b2474
Create separate individual hal_srng_table and hal register
offset in target specific source files. Create separate
functions for qca6290 and qca8074 for few hal rx tx
functions as the macro value differs between the chipsets.
Assign target specific hal tx, rx ops as part of hal_attach
and call respective hal tx, rx ops through callbacks.
Change-Id: Ibbf490c678c39fdd9d54191aad7aaec786db30ec
As per the updated spec, 11AX PPDU's HE SIG_A data-5 field has added
LTF symbol field which is 3bits in size.
Add logic to parse the TLV coming from hardware and update the
LTF symbol value.
Change-Id: I05e2ff8ece7e14dc22ce747e9a9b906bf130462f
CRs-Fixed: 2235233
Add max_size parameter in the hw_srng_table
to hold the maximum size for a given ring.
Change-Id: Ibfce021505ab9a55d3208b1c5aba26021d1fe230
CRs-Fixed: 2262818
For QCA6390 PCI address space is reduced to 1MB.
Change bitmask to map it to appropriate range.
Change-Id: I70385df91855b7e7ddbedf7f0c6bf6e364b7d78c
CRs-Fixed: 2259194
