select param id vote against sleep when enter to securezone with the help of
mixer ctl from pal.
Change-Id: Icb0d6aba4b13edc0658e676eb89c996d440e9971
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Adds traces before ssr shutdown and after powerup.
Change-Id: I77309be3e7598381117f6bdbf991f540a736b4f9
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
After ADSP is up during SSR, core_hw_vote may fail and audio_hw_vote
may successed in lpass_cdc_runtime_resume which is caused some timing.
When getting slave device_id, as core_hw_vote is 0, it will skip reading
swr registers and return 0 which causes fail to read correct device_id.
Make this change to avoid calling lpass_cdc_runtime_resume when adsp_up
notification doesn't reach lpass_cdc.
Change-Id: I90a97e5c47bb95180a96ba1c60b462f1fa0124b7
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Signed-off-by: Kunlei Zhang <quic_kunleiz@quicinc.com>
SWRM_DIN_DP_* registers are based on incorrect register values.
Update to match correct hardware addresses.
Also fix tabs/spaces mismatch in same file.
Fix CPS offset1 port parameter to be 0 instead of 0xff.
Change-Id: I641a925f1f3b454a6af0d2491d86459131bba2cf
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Implement backend for CPS soundwire port in Bolero.
Change-Id: Ibbd38d067e46be1a71723de04a83bc83f0ec2925
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Propagate all changes to lpass-cdc-wsa-macro to
lpass-cdc-wsa2-macro. Leave get_channel_map alone
because it is wsa macro specific.
Change-Id: I46733a759490d488f46eda24b4006a1dec63c7cc
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
update check not to exceed the array index for active_ch_mask and active_ch_cnt
Change-Id: Ic6d72d7469edbd004cd34a709384d527e90cd26f
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Update digital_cdc_rsc_mgr_hw_vote_enable/disable API with device
info for easy debug. Also, add swrm clock enable checks during SSR.
When SSR happens, swrm->hw_core_clk_en and swrm->aud_core_clk_en will
be reset without resetting audio_vote and core_vote clk. This would
cause clk mismatch in audio driver and adsp and device fails suspending
when there's no audio usecase. Make this change to reset audio_vote
and core_vote clk when receiving SWR_DEVICE_SSR_DOWN.
Change-Id: I9875aac9f6faf8b6481457a70f31b005073369e0
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Decrease idle holdoff time from 60 to 29 samples as per updated
documentation.
Change-Id: Ia8786020d6de8320f057f418e743507030c734c8
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
New requirement to update compander_ctl7 again_delay
field to 7.
Change-Id: I4c5ef15c645cabded50203bf92facbe7c8ff8c5b
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add wcd_disabled check in late_probe to avoid checking
wcd component when WCD is disabled.
Change-Id: I0de73a09f1bdfffac1412a4c1f8f8ec5e64e4c4b
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Due to certain write-once registers needing to be set during
bootup, assume that compander on will be the default usecase, unless
haptics SKU is used.
Change-Id: I7903f3a4bf1eae82b4b9302ddc4f1e4c59d2cad3
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update from SOC_ENUM to SOC_SINGLE to match rest of driver
implementation. Also remove remaining dev_mode enum references
in wsa884x driver.
Change-Id: I2a477c4fa8c29373ffa1e8e2eb599a0f1c61653d
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add check to validate bat cfg,
bat cfg register read compared to dts read
Change-Id: Ib62ae3b3535a75dbc7c71b2b2ac3752fb2e61156
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Update settings to match how swr_mstr_ctrl driver is using the
SWR settings to set the registers. Previously, an offset1 of
0xFF would write 0xFF to the register instead of skipping it, unlike
other swr settings. This is similarly true for SWR Slave setting
for bp_mode.
Change-Id: I3c5b2635c5a88a52639cbac9455a544d5cfee154
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add mod % 2 to allow dev_index to work with WSA2 Macro.
Also fix issues associated with incorrect parameter
checking of dev_index leading to potential array index
out-of-bounds issues.
Change WSA MODE mixer control to be SOC_SINGLE_EXT for
extra parameter validation.
Change-Id: I030ee64d87fa60c6b44feebf5ccb1265f4291cc1
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Match datatypes of variables in
lpass_cdc_va_macro_enabl_dmic() with
lpass_cdc_dmic_clk_enable() to prevent CFI issues.
Change-Id: Id378476b1aa6231c8542ca754124716af2b1f50b
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
While handling gpr callback, acquire wake lock with
timeout to avoid apps going to suspend and wake up if apps has
gone to suspend. It is required in order to make sure
SVA detections are handled properly with suspend scenarios.
Change-Id: I05e5792e4fa95cba074e936785357b26f8190865
Signed-off-by: Aditya Bavanari <quic_abavanar@quicinc.com>
Handle VMAX_CLAMP notification which is notified from charger driver
that hBoost is used by the charger firmware and haptics Vmax need to
be clamped to a specific level for the following vibrations.
Change-Id: I3d783467aad71e0d9b31a96120db7e89fd54c5cb
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
