We need only 3 bits of cookie field in link descriptor buff_addr_info
to store bank ID. The remaining bytes will be used set a unique ID,
which will be useful in debugging. Also fixed an issue in scatter idle
list setup.
Change-Id: Id3cc9a8a316fe942e749611c2f57e9324419dd40
assign msi vectors to srng rings based on the ext_group they will be
serviced in.
provide support for ext_groups in hif_pci.
Change-Id: If313fdb43b939871c0d73dea9a05f757427b5b16
CRs-Fixed: 2051911
When suspend is done, and if there are any outstanding
REO commands to HW, there could be a leak from allocated
buffers. FLush the buffer list during detach.
Change-Id: I62a7b612c401a36f5098163e017c3b42d7d3750d
Adds support for flow control on convergence branch.
Allocate Tx descriptors dynamically when vdev comes up.
Tx queue is paused and unpaused internally in host based on the
stop and start thresholds.
Changes are added under compilation flag QCA_LL_TX_FLOW_CONTROL_V2.
Change-Id: I0ccb80b0099f39efad52ccd7d47f2709fdee2a93
CRs-Fixed: 2040457
Add support for monitoring receive traffic from WDS nodes and
aging out inactive WDS nodes
Change-Id: Iedea826832a5421714c00bccadc6e0dc4acd4c7e
CRs-Fixed: 2004658
hif_exec_context extends hif_ext_groups to support napi and tasklet models.
Some of the rename and enahancements have been done to support merging of
the execution context management code between the CE and DP contexts, as
well as supporting irq affinity for both napi & tasklet contexts.
Change-Id: I82c8abf2e906f027ec80faf7353a7685536bb79b
CRs-Fixed: 2051902
Add CDP API to get security type for ucast and mcast from
peer handler. Add additional peer handler argument for raw mode
rx decap functions. The peer handler is needed in the raw mode
functions for getting the security type of the frame and process
it accordingly.
Change-Id: I8b4728e9eb0ff29849805bb461c81e4fc3accc81
Setup & process the RXDMA_DST ring to handle error frames
from RXDMA block. Pro-active fix to handle the WAR for
the WBM stuck issue seen when sending RX_FLUSH command.
Change-Id: Ibf56062da2cd9b5d447f1d43bbae5944426d88c8
CRs-Fixed: 2059870
Enable RXDMA status, desc, buffer and destination rings to
support monitor mode. The change also provides fix to properly
map pdev_id to mac_id.
CRs-Fixed: 2071602
Change-Id: Ie9caaaa0021d5842eaf28a5532b3ab5512fe507f
Add a in_use flag to identify if a rx desc is associated
with a valid nbuf and use this flag while freeing the nbuf.
Change-Id: Iace002ecadfd95ce60b7d1eaebc42194a433963b
CRs-fixed: 2044907
Current data-path interrupt registration/handling assumes PDEV indices to be
in same order as HW MAC IDs, which is not always true. Fixed this by adding
wlan_cfg api to set and get pdev index to mac id mapping.
Change-Id: Iec8e9f4a02cd618a3b244cfd6fc7ead1e7d993c3
CRs-Fixed: 2063673
Currently all Host collected DP statitics are synced to upper layers
on per-packet basis; This is causing significant CPU overhead.
Add a flag which can be controlled through iwpriv to enable/disable
updating of these statistics from DP to higher layers
Change-Id: I983c6d91803c83c1efd49c5535769a0c10fbc9b5
CRs-Fixed: 2064113
Currently interrupt mitigation values are configured for per-packet interrupts.
Change this for core DP rings (REO Destination and WBM Tx Completions) to reduce
CPU overhead of interrupt processing
Change-Id: I7bf0f6e78c52b5678ad3c8cc4d829444e410fad3
CRs-Fixed: 2064113
The irq entry for rx_err, rx_wdm_release, and reo_status
gets assigned for more than one context and this causes
double free irq during driver unload time. Fix the same
Change-Id: I197ee285e6eba5909dec3fa37677c13efce4765a
CRs-fixed: 2063981
Currently max_peer value is hardcoded with DP wlan_cfg. This change adds
a generic interface to obtain a configuration parameter from OL_IF and
store in DP
Change-Id: Id437ab3bcd02fb1cbcbe8b56d55d19780af87066
CRs-Fixed: 2004658
Changes to process PHY TLVs from monitor status ring and extract
information required for radiotap header.
Change-Id: I99d642e7506ea797b26dbfac89fd223d1a4c0a55
CRs-Fixed: 2048006
Fix bug in calculation of number of link descriptor entries per bank,
which was causing memory corruptions.
Change-Id: I68a86b8c644a4ef48a45ad5c98b739dced68d81d
CRs-Fixed: 2057893
Converged datapath currently uses a polling timer to check for pending
traffic. As part of suspend, pause the polling timer to avoid any
invalid accesses.
Change-Id: I6b4654c6737c08475443d021c04ba9385d084d74
CRs-Fixed: 2047505
Add CDP API for interrupt configuration to decouple interrupt
setup from soc attach / detach.
Change-Id: I422205ff5687fdc4a0936c68850455cc4e733e4d
CRs-fixed: 2046055
Modify the legacy LRO implementation to use the implementation
in QDF instead. This is to avoid code duplication and to unify
the LRO implementations for Napier and Helium.
CRs-Fixed: 2042812
Change-Id: I38e9da3b54392a1c5781133916361aac3875d43d
Adding support to parse stream of HTT TLV's recieved as response
to the HTT EXT stats request message
Change-Id: I44c990a1ed91c2381b89811de33c0717bd24be7d
CRs-Fixed: 1114641
Change DP_TRACE and DP_TRACE_STATS to use FATAL level.
Set DP module at QDF_TRACE_LEVEL_FATAL by default.
Change-Id: Ia894c6695699192feed204bb0dffdb9cfd59480c
CRs-Fixed: 2048931
Add peer-id in the meta data for the reinjected by the FW
and queue them to the HW.
Change-Id: I3f25d5f928b6891c06cad6ce3ed81df77d4e33ed
CRs-Fixed: 2024450
Changes include
1. nss_cfg parameter to dp_soc.
2. nss_enabled field for pdev.
3. cdp api to enabled nss offload config.
4. skip rx ring configuration when nss enabled.
5. skip timter /interrupt configuration if
nss is enabled.
6. peer map/unmap event hander.
Change-Id: Ic4a919b6b7e846e18cb15ebcb94f8736a751ecb5
1) Defined modularized public api for cdp module
to track inactivity and over load detection.
2) Initialization calls are added to attach and
detach SON specific api.
3) operating system specific calls are replaced with qdf calls.
Change-Id: I130d1e99208d6454f5d9888774534cc6d619ad83
1.Add QDF_TRACE_STATS for datapath stats to remove
module prints.
2.Fix Stats indentation for better readability.
3.Add missing stats
a. Update Packets on Rx side on per-ring basis.
b. Add stats for features (TSO/SG/RAW/Mesh)
c. Add packet type count on Rx.
Change-Id: Ief1719b67330f729ff60703ec2be26bc5e4201e9
CRs-Fixed: 2034876
Add support to set address search flags in WLAN Tx Descriptor
for TDLS operation
Change-Id: Iafb15fb1efd84a4bef436062368401a5496e4468
CRs-Fixed: 2041759
Add ring_packets variable to collect packet count on rx
path. This stat variable is incremented on
per ring - per core basis.
Change-Id: If8b51a757b28c231a6444e6b7f2e336b8c0cdd8e
CRs-Fixed: 2035142
Add nac(non associated client) configuration to pdev. It will be
used to perform smart mesh filtering on rx packets.
Change-Id: I29989d379e10fcc4a0e4aa19dbb3499650d6bf39
CRs-Fixed: 2017269
Add support to set addr_search flags in WLAN Tx Descriptor
as per vdev operational mode
Change-Id: I25fcd4bf450982f8aecc6e91236211c17d5f3f22
CRs-Fixed: 2004658
Add support to make WDS source port learning in lithium datapath
to be configurable.
Change-Id: I63eb64d6f46560a31f8e40a806d05d1dceddd784
CRs-Fixed: 2004658
