pass psoc/pdev object as ctrl pointers to instead of legacy objects.
It introduces new APIs to get feature pointers of psoc/pdev.
DP attach API param modified to pass ctrl psoc (psoc object)
Change-Id: I3d83f28c3e72e5ee984a4220b9d5cf3c4522b501
CRs-Fixed: 2177109
dp_tx_send_exception is an exception path that transmits frames
through FW by setting DP_TX_DESC_FLAG_TO_FW
Change-Id: Id6abfcd2bf060c4fe3aaca91634f3be501530a7e
CRs-Fixed: 2176814
Move the peer Rx activity to PPDU_stats_handler
which is common for both NSS offload and Host datapath modes.
Change-Id: I06c3dd14d117cc291e3b19076ddfc7f3be00e602
CRs-Fixed: 2176385
1. find_first_bit API returns Size value if it doesn’t find any bit set.
This was causing VOICE AC counter to go high even for TID 0
2. Reset stats was not resetting the stats immediately
3. Added checks to avoid spurious stats increment
4. Detect data/mgmt pkt to avoid spurious stats increment
Change-Id: Ic9c5695fc7bdf58d1237e7e20bb79378a02a21f6
Add tid to the defrag waitlist & timeout if further fragments are not
received.
Change-Id: Iff2d2c23fe796cf70bcc6aa43ab02a308a33ee9f
CRs-Fixed: 2174750
REO queue setup is getting triggered from processing
pending null queue exceptions in WBM release ring, after
sending peer delete command to FW, but before peer unmap
is received, causing target assert. Mark peer deletion
before sending peer delete command to avoid this.
Change-Id: I2d85d01e049cb37d9321beeee8e41f44e40e68ad
CRs-Fixed: 2155420
cck rates were getting updated for ofdm rates
and nss index were getting wrongly incremented
fixed the same
Corrected sgi and preamble too
Change-Id: I2dabb685de6e0bd4ba5094845cde228b3c32e2a9
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
Remove dependency of extender ap on VAP layer and radio(ic) layer data
structure
Change-Id: Ib336f518847abd1b29f5ea3cfd1a508dc2cd14e8
CRs-Fixed: 2148247
The pointer to peer is dereferenced after memory free in peer
_unref_delete function. Fix the issue by changing function
call sequence.
CRs-Fixed: 2167698
Change-Id: Iebd8f958bde4964c16a3c312d037e8f06e319350
Sending all frames to firmware will have high throughput impact.
Queue mesh frames also to TCL/TQM and send cloned frame to firmware
only if meta header information is changed to update meta header
information. Increased meta info size as per new ext2 header.
Change-Id: I89ff27994477a5637979a9cd6a397286144b2535
CRs-Fixed: 2162643
Addba recieve/response logic has been implemented in
host for HE instead of in FW like VHT. setaddbaresp
is not hooked to the dp module yet to set the addba
response from userspace. Implement the required logic
for HE to support this command.
Change-Id: I49cceca299db06d41f2cafa690f5ba59e01f1f4a
CRs-fixed: 2163475
during peer delete we are trying to update peer stats to
vap_bss_peer, but in STA mode we do not have bss_peer,
this is resulting in an assert during peer delete in STA mode.
Change-Id: Ie302dd74caf2df3ffe0a57e9ecd22a0c31cbcb60
CRs-Fixed: 2168929
TX descriptors should be unmapped and freed when VDEV is detached.
Or else it will cause memory leak in qdf_mem.
CRs-Fixed: 2163178
Change-Id: I59da73787786f78c1f057e4daad7b4d53e7fbe4c
vdev stats are getting reset to zero when a peer disassoc
with the AP. the fix is basically update peer stats to
bss_peer just before we delete the peer.
Change-Id: Ibada4ab82fbb68f32df89bdbae8b172bc8973fe7
Added dp path function pointers for inact
timers and set params used in WifiSON
Load Balancing Daemon
Change-Id: Ic23d7b562b476c0fb92c8734b029a4e1632599a5
If hal_srng_setup() fails, memory allocated for srng
is not freed resulting in a leak. Free the memory in
that case. In future, return error to caller and
assert when invalid ring ID is used during setup.
Change-Id: I6f3a7494a5c5e861652f3a38d18c220cd9a6eef2
Added a check in RX path to detect multicast loopback packets in
qwrap mode. In qwrap mode, there are multiple station vaps and
multicast loopback packet from one station vap should not come into
the other station vap. Added a check for this by iterating through
the vap list and checking if any of the vdev mac address matches
with the source address of the packet.
Also added a new vdev parameter to check if qwrap isolation mode is
enabled. In qwrap isolation mode, loopback packets should not be
dropped.
Change-Id: I7d35bf657a87337871156e4caec9038432e23a87
CRs-fixed: 2149190
Add following changes in the context of PPDU stats
1. Mirror copy mode enhancements
2. Fix memory leak due to mgmt. TLV
3. Reset RX monitor lite ring when enhanced stats disabled
Change-Id: Ifb260929290bc483dc05b152a11cd675104f3a0d
Add support to display multicast packets stats. Also
avoid sending message to target-if layer for every MSDU
to update node statistics
Change-Id: I7bb73d97bd8a02a601d191040a9a5730a9584d3d
Stats counters for BW were not updated correctly
due to difference in mapping of BW on host and FW
Also fix the Rx Stats to account for TCP Ack count
Change-Id: I7e844a7032e7968c110c7a0f8c45b0349a5cb818
In wbm_err_process function we are releaseing the sw rx
descriptors at the end and we are calling replenish after
we processed all the pkts in wbm_release ring. FW team said
that the re-fill ring is empty for high throughput scenarios.
To avoid re-fill ring being empty replenish buffers
first and then process the nbufs later. Also free any invalid
peer MSDUs during pdev detach.
Change-Id: I3e1088a3df3658965ffb31e0e0420a37203ba70e
Host CCE Classification changes for RAW Mode workaround
RAW Mode EAPOL frame classification for raw mode
Change-Id: I533c2e8bb55e3cd5088c6bff046e67066c784053
CRs-fixed: 2132295
For one byte data structure of unsigned type, it is expected that
the maximum value is 255. However, NR_CPUS is 512 in x86 setup of
Napier.
CRs-Fixed: 2158203
Change-Id: I057fb0cf3c11e687dfdd6cd2295b16743297d561
There is a hard-coded AST type number used for DP path, which will
cause poor readability. Fix this problem by using a pre-defined
constant type value.
CRs-Fixed: 2142975
Change-Id: I3520970bf59ea7152a0851cfdc3b8e7943ddbc19
htt_h2t_rx_ring_cfg is invoked with suitable configuration based on
filter passed by wlan_set_monitor_filter.
Change-Id: I2fbb81e95903ae1bead92892fdb3165c8a515f14
Add WDS tx/rx policy checks in Tx and Rx datapaths.
In Rx path, check packets against rx policy configured
In Tx Reinject path, checks are to process or drop 4-addr/3-addr packets
to peers decisively
Change-Id: I0a6c01b7555fa5d369ab2c9baf454d49808857fc
The existing peer API cdp_peer_find_by_add does not maintain any peer
references. So a peer which is returned by the API may get deleted in a
different context. This may lead to access to a already deleted memory.
Fix the issue by introducing new APIs "peer_get_ref" and
"peer_release_ref" which make sure the peer is valid until it is
"released" (peer_release_ref is called).
Change-Id: Id04d13bc6a1b8a55c1ae9246077f64ffb86de3d8
CRs-Fixed: 2146742
Add polling timer to reap monitor status rings
until PPDU end interrupts are enabled.
Change-Id: I742b0df6fd5a369d9664b5c2e09a70916585174b
CRs-Fixed: 2117063
Host CCE Classification changes for RAW Mode workaround
H/w CCE hangs while classfiying raw packets
so the classification is moved to host
Change-Id: I75cfc6b140a7983fcdfb797c93b9fd57f01c5ee3
Initialize the peer state to disconnected(OL_TXRX_PEER_STATE_DISC)
after creating the peer. This will also help in roaming case not
to send a vdev up again to the firmware, since the legacy code
checks for this initial state of the peer.
Change-Id: I5b5a664a81c1e295e405c648c1124e9ac844c9cb
CRs-Fixed: 2150449
As the correct usage, a lock must be destroyed after all jobs are
done. Delete an unwanted lock destroy of reo_cmd_lock.
CRs-Fixed: 2151585
Change-Id: Ieb24b747e9d4704b65026db3ecfee23a94fbf835
Add support for periodic stats for data packets to be displayed in
wlan driver logs.
Change-Id: Ifb8fc5cabb8ecd31da83b5d307721c1d41a30f9d
CRs-Fixed: 2118581
Provision to send first MSDU of a PPDU to upper layer based
on PPDU ID received in RX monitor lite ring.
FR 42926
Change-Id: I6daed9382b57fb3355ec6453e0609085cc7b9bb0
CRs-Fixed: 2127108
AM copy mode
Have a configuration to send first 100 bytes of PPDU, whenever
requested by upper layer.
Add required variable and handle code to enable/disable AM copy mode.
Change-Id: I1ebdcd0d1777e276af8c16334dae1f1a0760d5a8
CRs-Fixed: 2127108
There is a scale factor mapping between NAPI budget and internal
budget. Add logic for this dynamic translation.
CRs-Fixed: 2140049
Change-Id: Iac03bd431ab7a416a87e488b14bc8b5c1bb7869f
Multicast frames in NAWDS mode causing flood of packets between the
nawds enabled AP's due to continuous sending of mutlicast frames received
from another AP and vicevera.Resolved the issues by droppping the 3
address Multicast frames and 4 address multicast frames with sa_peer
same as tx_peer.
Change-Id: I5edbcb060720510eb6ea5f5ffd46402535ba6748
CRs-Fixed: 2130039
Enable support for new TLVs (including TIDQ stats) added in
Target Firmware for HTT based peer statistics.
Change-Id: Ia039b835b32953518b29b5ac2f896b1ddad5189c
CRs-Fixed: 2121641
1. Enhance CDP and DP txrx_stats interface to accept multiple
args. these agruments are passed to htt without any
interpretation.
2. Add reset stats support
Change-Id: I65db494824d03097e20dffc828bea380b16d411f
CRs-Fixed: 2136793
