WMI work queue rx context can block other work queue
shared on the same CPU if it takes more time.
Add watchdog timer for WMI work queue housekeeping and
assert if takes more time in SLUB DEBUG build
Change-Id: I60b1dad21afbf93a5b88aa855a2835bb0f85b82f
CRs-Fixed: 2104106
Add CDP API to set ptp rx opt. This rx opt is
needed for determining whether to time stamp
the received MSDUs or not.
Change-Id: Ia7cfbe838ff62ef0775164f542a160bf93e44a74
CRs-Fixed: 2095956
HIF close is not freeing RRI memory allocated during HIF initialization
resulting in memory leak of RRI memory after driver unload
To mitigate the issue, freeing RRI memory in HIF close.
Change-Id: Ib3daba8de0cabc1d8e303d7148448d21c47905e7
CRs-Fixed: 2019147
To support the CLD implementation to change BmissFinalBcnt dynamically
(Change-Id: Ie3c3895d48248d349400e755f07edc807e335b44), add new vendor
sub-command id QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BMISS_CNT as 52.
Change-Id: I8df8faab1b49d8fc30a1b775d5f5fec5139ca25d
CRs-Fixed: 2084255
Remove the NAPI quota check on processing monitor destination
ring. The quota is applied to monitor status ring process.
change Dummy TLV in status ring handling. The Dummy TLV
is not an indication of PPDU done.
Remove the mpdu err check in MPDU pop function.
Increase Monitor buffer ring, monitor destination ring
and monitor descriptor ring size.
Push destination ring buffer to stack when ppdu id from
status ring is bigger than ppdu id from destination ring.
Change-Id: If592a89ad132d405ab215024c8198a020153a9ff
Currently LCA Disallow (Last Connected AP) bitmap is hardcoded
to be enabled only for PER roam scan.
Add Background Roam Scan also to the LCA Disallow bitmap set from
host to fw.
Change-Id: I4878350ef772f168ba909fd8b30cf2aa31f68fcc
CRs-Fixed: 2109974
Regulatory spec changes(Regdomain_23).
Added below changes:
* Add new country Gibraltar.
* Create APL19_ETSIC for India to support -5875 Channels.
* Remove legacy MKK regdomains.
* Change default Japan country mapping to Japan15.
* Add MKK16_MKKC outdoor-only regdomain.
* Add APL17_ETSID, APL23_WORLD, FCC13_WORLD, APL20_WORLD,
FCC14_FCCB regdomain pairs.
* Assign FCC14_FCCB for PANAMA.
* Change APL14 and APL15 UNII3 power.
* Assign ETSI8 for Russia to remove DFS.
* Assign 2MHz minimum bandwidth for ETSI1 and ETSI4.
Change-Id: I59f297328fe8ff3c5ace979370ef21570560c71a
CRs-Fixed: 2081279
Refactor the code to dynamically change the conc_system_pref.
Whenever user changes conc_system_pref from application,
driver is overwriting the conc_system_pref which is getting
populated from ini file. Once it is overwritten there is no way
to get the configured value for this setting. So add a new
variable to hold the value of conc_system_pref without disturbing
default value read from ini file.
CRs-Fixed: 2082073
Change-Id: Icfb245c7a8872885332ec222780c911d08521d46
Add support for handling vendor sub command
QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS and its attributes.
CRs-Fixed: 2100587
Change-Id: I8734deb4eb2e2481329131d47b747d266463350a
There is a dead loop when nbuf allocation failed for SDIO WLAN.
Do not change the status back to OK when E_RESOURCE is triggered.
CRs-Fixed: 2112323
Change-Id: I50b8fff99707cdccb1e5e837558131d6777ec9c0
Extended service bitmap is used by FW to indicate supported services
bitmap for services excedding the current limitation of 128. Add support
to save and use this bitmap to check services supported in FW. Also,
change exisiting services bitmap to be dynamic allocated buffer to
optimize the buffer used to save the bitmap.
Change-Id: I24a0321bc1a06ee3aedf1c6acbc379e907bbd464
CRs-Fixed: 2103617
A recent change added a wrapper to nla_parse. When CNSS_GENL is enabled,
this new wrapper API is not defined in cnss_diag_cmd_handler, causing a
compilation failure. Include the appropriate header file when CNSS_GENL
is enabled.
Change-Id: I2e929b48e306fb1426eb6e59011cd821922bb8dd
CRs-Fixed: 2112767
In tdls_set_peer_caps(), is_buffer_sta and is_off_channel_supported are declared,
but are not initialized. This will create unpredictable problem in TDLS
operations.
Initialize all the variables with default values in peer capability.
Change-Id: I469d7a56e1222944f3cd76efb76544aba7d8dff6
CRs-Fixed: 2092034
On framework initiated scan, ies are not sent in
scan request from upper layer and default scan ies are
not sent as part of scan request sent to firmware. This
results in not including oce ie in probe requests for
framework initated scans
Fix is to copy default ies to ie field in scan request
sent to firmware.
Change-Id: I895563bafc2a2b6e483d08cb28ee44ad34f5af70
CRs-Fixed: 2087124
Add a new dumpStats parameter (25) to dump disconnect stats.
The following command will dump disconnect Stats into QXDM.
>iwpriv wlan0 dumpStats 25
Related qcacld-3.0 change I0908c947b5c829f51b087871ad11d5674908dca2
Change-Id: I359ef19c268123848fe6195f6453a6c246fba3a1
CRs-Fixed: 2058958
The WLAN driver should compile against kernels that do not include the
IPA driver. Move an ipa.h header file include under an IPA_OFFLOAD
feature guard to allow the driver to compile when IPA is not supported.
Change-Id: I4d8ca77bace273d16453b123daa0363de16bf5ea
CRs-Fixed: 2111891
qcacld-2.0 to qcacmn propagation
The ul_outstanding_cnt is not increasing when do TX sending in the bundle.
Which will cause the count is not correct, and will drop to the negative
number.
Change-Id: If7f06b376633b3384203cc49d8e8acafdd1b4853
CRs-Fixed: 2112977
When printing memory allocations via debugfs, the dedupe table is
flushed to output when it reaches capacity. If the dedupe table is not
full when the allocation enumeration is complete, the entries contained
will be dropped. Flush the dedupe table to output one last time when
enumeration is complete to avoid dropping memory allocations from the
output.
Change-Id: I10f866b7bfa13c871d75e3e4ff798a8a820482df
CRs-Fixed: 2110106
Add support to include per msdu header info for each msdu in monitor mode.
Set HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED in htt msg
from host. Enable per msdu bit and set it in the dp_htt to be used for
filtering.
Change-Id: I36217e893c40570c86b758f586c581d88633b557
CRs-fixed: 2101013
Add new Bad RSSI threshold offset for 2G to 5G roam and flags
to roam_offload_scan_rssi_params and fill them in the WMI cmd TLV
to pass it to the firmware.
Change-Id: I78876f5104e67280b1342ec0957d0162edbaf502
CRs-Fixed: 2105894
Run throughput with Rome chip, crash happens since of too many logs
in pm runtime put and get. So remove log in these functions.
Change-Id: I9ca4ddef328ade7fef63d04f19603927cf8ee6d8
CRs-Fixed: 2112431
The QDF delayed work APIs currently expect delay intervals in terms of
jiffies. Since QDF is OS agnostic, and jiffies are Linux specific,
interpret delay intervals in terms of milliseconds instead. This aligns
the delayed work APIs with the general timer APIs as well.
Change-Id: I9b9300425baa0857c35f63823de2037a954eed1f
CRs-Fixed: 2111987
For no offload case, channel map is needed to calculate
regulatory channels. So initialize channel map when dfs region
is set.
CRs-Fixed: 2104133
Change-Id: Iee406b89429588185488acef23380b6cfa8f2af9
Issue: create 33 VAPs on both WIFI0 and WIFI1, will see fw crash
Root cause:
2nd DWORD in vdev id map array is never used, so max id is 32
Fix:
map_index needed to be updated before used to calculate adjust_ix.
CRs-Fixed: 2089479
Change-Id: If808d13dbd375197fe637bb53da0bcc3d654ec9e
Add a check for update_dp_stats before calling it.
This is registered only for WIN & causes a crash on MCL.
Change-Id: I584b7dba73bcc2426deb97641c30b4d704ce0d8b
CRs-Fixed: 2111735
Linux kernel 4.10 removes the vm_area_struct parameter from the
vm_operations_struct->fault handler. Add conditional compilation to
provided the appropriate fault handler signature based on the version of
the Linux kernel being compiled against.
Change-Id: I467f4d8426ecfa55e4f2aac26a5326901239a752
CRs-Fixed: 2094824
Currently nl_srv_bcast() and nl_srv_ucast() allocate a temporary
buffer to hold the netlink message which is subsequently sent to
userspace. The value returned by qdf_mem_malloc() is not checked for
NULL, and hence if NULL is returned it will be dereferenced.
However in reality a temporary buffer is not required. Update the
functions to directly send the message from the skb.
Change-Id: Ia12e1695498323c4e29b8280b9265c20393a2fe7
CRs-Fixed: 2111674
Mismatch between structure ieee80211_cipher definition and initialize
order.miclen is taken as 0 instead of 8 because of wrong order.
CR Fixed: 2096266
Change-Id: Iadcdb971d3b09abee5b189e9882b2f5055d93b6c
qcacld-2.0 to qcacmn propagation
Currently the crash can be injected by iwpriv command and FW
gets crashed.
Changes are done to add the gEnableCrashInject ini parameter
1) This ini param is disabled by default.
2) If this param is disabled the crash inject is ignored.
Change-Id: I7e908be1e37090a9d343dc04411fe387f776a937
CRs-Fixed: 1087774
Fill the roaming parameters wmi_roam_bg_scan_roaming_param and
send them to firmware to be consumed for the background roaming
at bad RSSI
Change-Id: I08786141d28f8459aad27aaf53816ec4cdec7f08
CRs-Fixed: 2082906
Add wlan utility APIs to get IE pointer from within IE buffer by
EID or Ext ID.
Change-Id: I26492078cec73b5877f3fc346a91223a045f31aa
CRs-Fixed: 2103529
Get the MAWC based NLO parameters from HDD/UMAC and pass them to
firmware via target/if
Change-Id: I76d7c8677ee73f9a3c54b7af4943b74a6b23323d
CRs-Fixed: 2064837
Problem:
During DFS attach the DFS related timers are initialized only if
the DFS is not offloaded.
When user issues a bangradar command for full offload where DFS is
offloaded to FW, HOST is trying to set a un-initialized timer and
leads to a crash.
Solution:
Handle bangradar command in HOST only if the DFS is not offloaded.
Change-Id: I8d23d450ff1941890fdc81cef1425fae8b55ce56
CRs-Fixed: 2108874
In monitor mode, code decodes legacy rates and bandwidth information for
HT and VHT. Other changes include populating radiotap header with correct
nss and mcs values for legacy, HT and VHT frames. Mapping of mcs rates in
rx_msdu_start tlv and radiotap header info is done using Lithium data
structure document.
Change-Id: I5f20e5d89329738e3a6c076ee14457c003cab279
CRs-fixed: 2083027
