Reading extcaps from the scan entry currently checks if the byte
to be accessed is less than the length of the IE. Following this,
it will attempt to access the extcap IE using the requested byte
as the index.
Avoid accessing the extcap IE if the byte is greater than one less
than the ie_len (since indexing starts from zero).
CRs-Fixed: 2856212
Change-Id: Ie357edcd6095570c05871af657381c287e92504e
For smart monitor initialize monitor buffer ring,
Monitor direct mode onto monitor status ring expects monitor buffer
ring to initilized with at least 64 buffers.
CRs-Fixed: 2863316
Change-Id: Ie67ff465522184ad776a9ba76a68c00f02f92221
Fix the index used for looping over descriptors
to free the memory that was already allocated, in the
event of an allocation failure.
Change-Id: I791cdf0b040664a5d39bb52f416d7aab7f3b6bf4
On one-msi platform, when some ce tasklet execute, other srng such
as reo generate the interrupt, the ce interrupt handler can also be
called and then schedule the ce tasklet, if the running ce tasklet
intend to re-schedule itself due to the rx pending, obviously will
fail, then ce active tasklet count leaked.
Decrease the ce active tasklet count if failed to re-schedule when ce
rx pending.
Change-Id: I36c1c6c007735e192bee5af12aab674ee8324ca9
CRs-Fixed: 2830443
Currently, there are separate list for 2g/5g and 6g reg rules. Only one
list is sent north from pdev, so append the corresponding rules to the
existing list in the pdev only.
Change-Id: I28e68f345ae6faad3ac2d929dac3922e9389d53e
CRs-fixed: 2860702
According to regdomain update #33, Israel is mapped to
ETSI17_WORLD for WIN and Linux Android.
Reflect this mapping in "country_code_to_reg_domain"
table.
CRs-Fixed: 2867399
Change-Id: I340916175e2d049a2c8c978d16e35e1894089c24
Add is_wps and is_osen in connect req to avoid parsing assoc ie
multiple time to get the info.
Change-Id: Iae0130e946d02cdacfec986770ef25b3d6b57aa4
CRs-Fixed: 2859665
In cases like Tx capture or per packet info, need to unmap
before skb is touched. Add wrapper function to do the same.
Change-Id: I0d13b2d90c80972f346f85960b1297511771516b
Add SAP and P2P GO d3wow feature support config to send it down
to FW during WMI INIT such that FW is aware when SAP and GO with
client connected mode d3 wow feature is enabled.
Change-Id: I04b398f71727112ce5c536bbf2bfcfd4eefe2752
CRs-Fixed: 2866604
For hastings, it has two dma rx rings, and the first
one is for spectral scan, and the second one is for CFR.
So increase the max supported rings number from 1 to
2.
Change-Id: I85500bba366a4321ebc91e92f72146dd20311d03
CRs-Fixed:
Add function declaration for mlme_proc_spoof_success API and its
corresponding function pointers. This API is used to process spoof
completion status from FW.
Change-Id: Ia25ffd01619a0c9d1e5a1bc4c20623b75ee8d75e
Swap each word of ftm data before sending to FW.
This is needed since copy engine swap is enabled for big endian platform
and ftm data needs to be given to FW in network byte order.
Change-Id: I90b90adf77d92d254478605668efd94972c4129c
Function qdf_debugfs_create_entry's last parameter should be
qdf_file_ops_t, not qdf_file_ops_t *.
Change-Id: I847a05b81944562808c29a42b176c822639509ba
CRs-Fixed: 2864863
Use macros like dp_cdp_debug, dp_cdp_err, dp_cdp_info to
print logs for QDF_MODULE_ID_CDP
Change-Id: I550eefa82c3417b8bf83378d4a9c6f382098fea6
CRs-Fixed: 2855937
Add a pci gen switch flag in the wmi resource config to send
to FW in the init command.
Change-Id: If3a50d80103387a8f1f77ecb43a16c7b41ce5a11
CRs-Fixed: 2865866
This change will set up monitor mode status and destination ring
filters for enbale CBF logging and will enable destination ring to
capture CBF frame. This change will get the CBF frame from the
destination ring and send it to the pktlog module for post processing
through WDI event. CBF is a compressed beamforming report.
Change-Id: I4cc419440ba8d60446dd1f01747340a89f023171
1 Add protection for wrap around of jiffies.
2 fix assign issue from uint32_t to uint64_t.
Change-Id: Idbd3604d0cb985d08aa82e3b1d7f32fa6be8c3ef
CRs-Fixed: 2864737
Host updates proper FILS param set i.e. username, auth_type and
is_fils_connection in the FILS response.
Change-Id: I0c30325bc7d620aa286aae0dd299dec9b26219ff
CRs-Fixed: 2865060
This change notifies MLME about DFS CAC WAIT state,
and removes code, which releases PDEV RESTART and
enqueues STOP-START command
Change-Id: Iaaf4b657c4f95330e3ac383adc74211b23006718
CRs-Fixed: 2862724
The current print rate limiting for prints to console is
for all contexts.
There are some debug prints which come to console via work queues
which we don't want to rate limit and only rate limit coming via
interrupt context or bottom halves which causes
FW backpressure due to excessive prints.
So rate limit prints coming to console if in
interrupt context or bottom halves
CRs-Fixed: 2853590
Change-Id: I867b2c0d17b54037ee45eb6b7871a16c2668d7ba
The qdf_in_interrupt API was defined in the internal
Linux util file.
Move the API from internal to qdf_util.h and provide
the appropriate abstraction
CRs-Fixed: 2853590
Change-Id: I512155776275684223c1901d789853d2529fcc83
Currently the FW configures the mac with appropriate
offsets for rx pkt tlvs using the structure defined in
te FW and the host does not send the ring selction config
HTT message. This can create a problem when FW stops subscribing
to tlvs or changes its rx pkt tlvs offset.
Fix this by configuring the rx pkt tlv offsets via HTT
ring selection config message.
Change-Id: I1a2865f91b34dd7bda1af8651d7831097dac0bee
CRs-Fixed: 2860504
During DFS_SPOOF_FAILURE Check, the reason for failure is unknown.
So for debugging analysis purposes, add debug prints to print the
average params that are sent to FW.
CRs-Fixed: 2847047
Change-Id: If1e20352f62f4286396a9f93f49c528bbf38f95e
mu code is not sending frequency in top 16 bits of tlv.
this check makes sure not to check for freq 0 and still be able to use
channel to generate freq.
Change-Id: If18c400e51bc41f8fec4fd50bdd180adfd79e578
Usage of api reg_chan_to_freq is replaced
with wlan_reg_legacy_chan_to_freq. So remove
unused api reg_chan_to_freq.
Change-Id: Ic14d5204c68698ef4cfd5953cf511503b211d461
CRs-Fixed: 2853570
Set proper error code when ce_state creation fails. Sending success from
here results in inconsistent state of CE data structures resulting in
invalid access. Send failure as return so that proper handling is done
by the caller.
CRs-Fixed: 2855116
Change-Id: I9c063760656a8125e627aaa62b309a2bb4c0ac6f
Remove utils_dfs_bw_reduced_channel as this
function is not used by MCL or WIN.
Change-Id: I042578fea76cd845b90f240fa3e814e50f2eaf5b
CRs-Fixed: 2859799
ME code calls dp_tx_send_msdu_multiple API for Tx the converted
unicast packets. Set nbuf next to NULL before calling ME
convert API to avoid Tx of nbuf->next multiple times
Change-Id: Id063e227b56c494108dc23bd2fdbdc9c085ba4ab
When RTPM suspended, wlan_hdd_cfg80211_stats_ext_request and
dp_peer_rxtid_stats are called to get tx rx status, dp and ring
spin_lock_bh is held, if RTPM suspended, printk happens in
hif_pm_runtime_get which consumes 1 ms. In dp_peer_rxtid_stats,
REO cmd CMD_GET_QUEUE_STATS and CMD_FLUSH_CACHE are called for each of
17 tid, so total 34 printk delayed 34 ms.
To fix it, disable prink in hif_pm_runtime_get when called in
dp_peer_rxtid_stats.
Change-Id: If043d6772e337e42a5478de17480253f45d779c6
CRs-Fixed: 2858534
Change the minimum CFR periodicity from 0 / 10ms to 0 / 2ms,
and ensure that the period value is multiples of 2ms.
Change-Id: I9112e47d21cbb40c83852e404bac3ce1b48897a4
CRs-Fixed: 2862591
mcs is copied over to already in used ppdu_desc
this prevents ppdu_desc to increase lower mcs counts during stats
process
Change-Id: Iec68438a86359ec791302ecf2eeaec4fbd941632
