During high framerate cases, disable RSC solver mode as there
will not be much power saving to be done. Disabling is decided
through panel timing node property.
Change-Id: I178170a5ab1b7e31b92ae3019e0147c05a282850
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
For higher refresh, to provide higher transfer time we need to disable
RSC solver in MDP. This can be configured through the panel timing node
devicetree property. This change adds the parsing of the devicetree
property.
Change-Id: I9e708325da35086d2f955cbcc80bb164ccb116cd
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Use panel width variable to compare against RC region size instead
of the ROI size which can change based on the LM configuration.
Change-Id: Ia1d5f88893a55778172e6da10bb235e9c483cd38
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change fixes the continuos splash logic that identifies the
pipes staged by bootloader. The same code flow is used in trusted ui
handover as well. Existing logic was counting the pipes twice if the pipe
is staged on both the layer mixers. This change simplifies the pipes
already staged before handover by using the pipe index to convey if
it is staged or not.
Change-Id: Idb255f2077161dc3553114ac5d04e0ef743bb5ea
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change prevents entering into idle pc during ESD
recovery. In the event of a panel dead scenario, the panel
TE is no longer valid until display is enabled again. Until
the time display is enabled, idle pc will be blocked so
that display does not fall into then exit idle pc and
attempt to set the vsync source to this invalid panel TE.
Change-Id: Ibdc71b803d50923832f08b238a96aa28854aaea0
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change adds more panel and display information during the DSI
display bind.
Change-Id: I3571244501149a95ea4f6ab0e496112199f7bbde
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Panel operating mode switch will not change topology and it will
not trigger atomic_check for encoder to reconfigure topology.
So add this change to avoid reset topology when mode set is triggered
by POMS or non-seamless display mode switch.
Change-Id: If1afb30a97bf2695dd8849f025c20b5561fa4b82
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Currently RC CRTC blob property is not getting cleared when
driver file descriptor is closed.
This change adds RC propety id to list of properties to
clear in last close code path
Change-Id: Iae1355a6bb51d58f119a209fbfcd8e59e470d46e
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Currently the top/bottom pixel extension overfetch value for
component 3 is misprogrammed with left/right value.
This change corrects the programming sequence.
Change-Id: I2e7accb48840a976645c92cb57b48c6663ae20a0
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
For simulation panels read commands need to be avoided. The change
also adds and substitues sim panel check with a new is_sim_panel API.
Change-Id: Idafdad8a852cad87d97bbc64e9c7cb82460e25b7
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Currently, driver expects usermode to set RC blob flags based on
the RC PU use case, which causes issue when commits are staggered
and is unnecessarily reprogramming RC mask data on every PU frame.
This change uses existing driver logic to internally determine the
RC PU use case and programs the RC region enable bits accordingly.
It also adds essential logging in RC functions to help debugging.
Change-Id: I19ae59a79dbee20f357b384c12acd7d2a6a93fb4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
In case of back to back atomic check only commit with modeset
handling, enable client to retry same commit and increase
timeout value used in polling for clear of rsvp-next.
Change-Id: Ied7acfbf0fe1f68282cfc36cdadf2d6aec6db40a
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
In recovery mode, display module needs to be loaded
to enable recovery mode options on display panel. Add
display dlkm to be part of RAMDISK_KERNEL_MODULES and
RAMDISK_RECOVERY_KERNEL_MODULES so that it gets
added to existing recovery modules list.
Change-Id: I7811b81808e934c0f542c46f4f2211c02e267adc
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Avoid registering for te interrupts to check te status
for ESD detection during commit failure path.
Change-Id: I447473f7c32a396f72d838c68287bed0eda64b20
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Update the dump_mem pointer offset while storing the debugbus
data for the second DSI to avoid overwriting to same memory.
As part of the change, register the DSI ctrl with sde_dbg from
ctrl_init directly, instead of debugfs_init to avoid code replication.
Change-Id: I4089f3038ffa89136eaea956d27270f638a99043
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Avoid all info logging during sde_dbg_dump by default as it can be
derived while parsing the ramdumps. Use the reg_dump & dbgbus_dump
debugfs nodes to control the in-mem/in-log mode of these logs.
Change-Id: I709d49a4a503618b9621f32725a8fbd5359a0600
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
The change ensures that during a Trusted UI case, configuring
and toggling the DSI PHY PLL is skipped.
Change-Id: I3246c8e5f01d47ac6fd58098f859ef8436a762bf
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
In dumping display registers, physical address will be appended after
each block name. This is to support register compare between kernel
and UEFI.
Change-Id: Ic20d3e2bd4c95aa7c71c4b646a149f7e83ad731a
Signed-off-by: Yu Wu <zwy@codeaurora.org>
