Commit bd234c1885 ("disp: msm: sde: avoid irq enable/disable
during modeset") adds a check before reserving RM resources as
part of modeset. Without this reserve, the resources are not
always allocated during modeset. This change removes the check
around the rm reserve to ensure resources are committed.
Change-Id: Icbb47ad781a04a0cd39c0190e9653eff470af7a0
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Currently, on a video mode panel when a mode switch occurs after the RFI
bit clock rate has been changed, the driver fails to find the new mode
in the list of panel modes due to different porches value between
the adjusted mode and the default panel mode.
This change removes the front and back porch value check from mode
matching function when dynamic bit clock and maintain constant FPS
features are enabled.
Change-Id: If267a4f732fea2c7d84c8bb3d5650f3e93722ec4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
While programming intf block Mux configuration with
binding ping pong, avoid clearing split select field
as clearing this field would enable split by default.
Change-Id: Iad2fa81969bc59abba4467f29661e62c63ba19c0
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
During encoder modeset, driver does not check for ping pong hw
before going through with mode set. This change updates the check
at the encoder mode set and adds a check at the encoder wait
for irq.
Change-Id: If27faa29ee29040808473e44994f42c36980a45e
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change fixes issue, where USB driver was not properly updated
with the number of dp lanes being used for altmode usecase.
Change-Id: Ic93d3e3b37aa8ad2d664e006ede3cf6c27d7133a
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Originally, a call is made to dwc3_msm_release_ss_lane to
notify the USB driver that DP 4 lane is in use. This was
cleared on USB disconnect. Combined with the autosuspend
timeout and UCSI notifying that USB was not needed, this
caused issues in bringing up the monitors.
This change implements a new api call from the USB driver,
dwc3_msm_set_dp_mode. DP driver makes a call to this api to
notify USB driver for 2 lane, 4 lane, and disconnected states.
Change-Id: I051e5424c518ca84e2cc6dc27c114715dc287ac0
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Currently, any edids read by the driver are cached in the
sde_connector object. In the event that subsequent edids are written,
the cached edid is used instead of the newly written edid.
In the event a new edid is written to the edid debugfs node over
dpsim, this change clears the current cached edid before overwriting
the new one.
Change-Id: I53f870e97c3b9ac5954d193f74e4b272386f67a8
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
The change adds a check for DSI controller and PHY resources during the
DSI display probe. The validation now only checks for the availabilty
of the resources without increasing the refcount of the controller or
PHY till an exact match is found after the device tree is parsed.
Change-Id: I96a5022a8ab5f55271e0df36675037b597e1ec85
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Add tui vm specific config files where driver configs
are optimized for the TUI usage.
Change-Id: I19f53f3133aa40711b8f7ccf7c323b41e428233d
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Enable sde power resources while dumping the registers in
SDE_DBG_DUMP_IRQ_CTX context after switching to workqueue.
The call is initiated from IRQ context and queued to workqueue
for execution. The extra vote will make sure the resources are
kept enabled through the register dumping.
Change-Id: I938049f6e2f1504ada2ce34ed4f56abb9c564f10
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change moves mmrm enable flag to the display platform config files.
This allows to selectively enable mmrm in the display driver,
so other platforms not requiring mmrm in their build can compile
with their own config files.
Change-Id: I02415c6a22252dfc483a3da03b623351811ffc01
Signed-off-by: Christina Oliveira <coliveir@codeaurora.org>
This change reprograms planes and crtc as part of the post enable
power event so that the first commit sequence after this event
does not have to reprogram these.
Change-Id: I2403337b95c70d2a3104aefcc647afa66f4c69a6
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add support to send a data packet of info, written to
predefined buffers, providing information about each submitted frame.
Add required UAPI definitions for frame data buffers and event
notification.
Add support to read ubwc statistics from hw, based on defined rois.
Change-Id: I51f279de98ae4e2a02b0df6943d334764011d5db
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change adds a utility for mapping gem buffer objects based
on a frame buffer object. This utility will be used as
a basis for different driver components.
Change-Id: Ia9f2a42a9f8898c98478091b8e1cd06849145417
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Some of the color processing features might not have a property node,
add checks to prevent caching values for these category of properties.
Change-Id: I02bfe8e6a6cce8526423c4d50bc2c781fff24efa
Some panels require a fixed step rate for a particular mode.
This change allows DSI panels to specify a single supported
step rate for each nominal fps rate which SDE will enforce
during atomic check of AVR parameters.
Change-Id: I049415449bc88ccd396fced16d4534251eac3a06
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add AVR step support so SW can trigger a late frame and instead
of immediately triggering, HW will perform the update at the
start of the next step interval. This allows for a fixed SW
vsync timeline to be maintained in userland, eliminating the
usual drift from the actual HW vsync caused by a late frame.
This change adds AVR_STEP support via a DRM property.
Change-Id: I4cf8a296989805f134c2165a3bed0b050bb09c96
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Refactoring of iommu headers is moving few downstream attributes
defines to new header from dma-mapping.h. This change includes
the qcom header for downstream attribute defines.
Change-Id: Ia1f9f40f2cb8090dc7b7e3cbe0b632449c44c3b0
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change exposes whether or not inline rotation threshold
should be taken into consideration or skipped based on
skip_inline_rot_threshold property.
Change-Id: I4108f6ae86039815d28836bfa0e184737aaddd8a
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change return code in set property retire fence function
to properly handle the cases when the user value is 0.
Change-Id: I32481ba6bdb13df707cf36a70aa2d49506cd7d7c
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
In DPSIM, while calling the hpd callback from dp_sim_host_hpd_irq,
the hpd argument is passed in as false. In the hpd callback, both
the hpd_irq and hpd arguments need to be encoded into the vdo
parameter. Currently, MST DPSIM testcases are broken because this
is not implemented properly.
This change sets the hpd argument to true in the hpd_irq callback, and
encodes the hpd and hpd_irq parameter in the vdo object before passing
it to the simulate_attention callback.
Change-Id: I07155716699aad8554b6e08b446139bcd0d7fa74
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
This change expands on the checks comparing different dsi modes.
Previously, only h and v active and refresh rate were checked to
decide if a matching mode is found. Now the check will include
all h and v components in dsi_mode_info.
Change-Id: I6a4ca3456138c38615fbd5c50dfd9658cc3a2119
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Request for display in firmware only if no display enabled form
the UEFI.
In the targets supporting dual DSI display having both displays
DT nodes part of the connector list, if only one display is
enabled from the UEFI, then the driver requests for display
in firmware for the second display. Getting the display panel node
from firmware is time taking process, and it can take up to
ten seconds. This causes a delay in adding the component for the second
display, resulting in a delay in bind calls for components of the
msm drm driver.
Change-Id: Ic0aa5ca890fc874d38d3e7eef745f2942e12f9bc
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
This change moves the code of updating the qos lut for qseed3
to each plane after updating the scaler configuration. This
avoids using stale values for qos settings.
Change-Id: I2c55a98e1ba9790d596c55160933cd5afd2388e5
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
