Send BSS color and partial BSSID bitmap to fw when SR
enable is sent to FW, so that FW can classify the srg
and non-srg colors.
Change-Id: I44711fd7e7cc05867d042a04e783ae29b04b388a
CRs-Fixed: 3304796
Add support to set / get SRG min and max pd threshold
offset, SR disable / enable due to concurrency in vdev mlme.
This will be used to verify that PD threshold provided by user
is with in the AP range or not and it will be used to send the
data to userspace whenever queried.
Incase when single MAC concurrency is not supported with SR,
these VDEV mlme variables will also used to enable / disable
SR at dynamically.
Change-Id: I024b31950d9a5c0f5086972e91db440b23ed712f
CRs-Fixed: 3304789
Currently, SRG pd offset is not sent to fw as part
of WMI_PDEV_PARAM_SET_CMD_OBSS_PD_THRESHOLD. Add
support to send SRG pd offset provided by userspace,
if provided offset is with in the range of min and max
SRG PD offset advertised by AP.
Change-Id: I8b70dedbabcc6c3a296b8d378b9317924dd5c581
CRs-Fixed: 3304747
Handle SR enable vendor command as part of which
send PD threshold value provided by userspace
check the range of the provided threshold,
if threshold lies with in SRG or NON-SRG
range then provide the threshold sent by
userspace else send the MAX of SRG and NON-SRG
offset advertised by AP.
Change-Id: I428a933cc324446fdb4f18f535f1b78228d504fa
CRs-Fixed: 3304779
Move the QCN attributes enum to common code to keep a sync
between FW and Host values.
Change-Id: I0e4da33781c9e5230b6b309942cdc672c707d29f
CRs-Fixed: 3307120
We allocate extra buffers than requested when watermark is less
than critical low threshold. While allocating extra buffers we
should check for boundary conditions so that total allocated
buffers is always within the range of available entries.
Change-Id: I2f24c6157cb2afcc8bc5ca84b7e0308588a4d99d
CRs-Fixed: 3307051
When compact rx tlv feature is enabled fetch the
reo qdesc from the peer instead of rx pkt tlvs.
Change-Id: Idc9eec559b71ebb2dc39ea1d648a384ea0eb9559
CRs-Fixed: 3311270
CNSS prealloc maintains various prealloc pools of 8Kb, 16Kb, 32Kb
and so on, and allocates buffer from the pool for wlan driver. When
wlan driver requests to free the memory buffer then CNSS prealloc
derives slab_cache from virtual memory via page struct to identify
prealloc pool id to put memory buffer back into the pool.
In kernel 5.17, slab_cache is removed from the page struct. Modify
QDF functions to add headroom at the beginning of allocated buffer
to store cache pointer. CNSS prealloc will store cache pointer in
this headroom during allocation and later use it in identifying
prealloc pool id to put back the buffer.
Change-Id: I2c19b72b82092d553d474a50385ed3095a0fab39
CRs-Fixed: 3312550
get the HP of the RXDMA ring without incrementing
This will ensure in case of nbuf failures the ring
HP remains unchanged
Change-Id: I69ec9207a44a4c50484933797326e962ad2d4a5c
CRs-Fixed: 3309394
If SSR happens, before any tx_completion is received for
packets queued on copy-engine, there will not be any
tx completions received for these packets and should be
freed during de-init.
Currently the TxLookUpQueue is being flushed only for
WMI and HTC_CTRL endpoint only. HTT_DATA_SVC endpoint
also has interrupt based tx completion processing
enabled for certain targets, and the packets for this
endpoint are not being flushed during de-init.
Fix the above issue, by flushing the TxLookUpQueue for
HTT_DATA_SVC endpoint if interrupt based tx completions
has been enabled for this CE pipe.
Change-Id: If79c2ace17c3bfb8ffeb03cb69c142f7ad43aedb
CRs-Fixed: 3307267
In some of the erorr cases, allocated mpdu's are not
freed leading to a memory leak.
Changes are done to iterate over mpdu queue and
frees allocated mpdu.
Change-Id: I18d3a57b366b9fa7aa934ac062c7acd1a9065d1b
CRs-Fixed: 3295577
Initially there were no peers connected to AP VDEV when the VDEV was in
MLO_SYNC_WAIT state. So EV_DOWN would directly move to STOP state and
proceed with bringing down the vdev.
With CSA in MLO, there can peers connected to AP VDEV in MLO_SYNC_WAIT
which have to be deleted/cleaned up as part EV_DOWN event handling.
Added change to handle the DOWN event as done in START/UP_ACTIVE state.
By moving to SUSPEND, the clients are disconnected then moving to
STOP state.
Change-Id: Ida71914b9719395ab666805cc7072491ffa9baf1
CRs-Fixed: 3308207
Add a new vendor sub-command to implement Spatial Reuse feature.
Userspace enables SR feature with specific configuration parameters. The
driver/firmware upon receiving the command, enables the SR feature if it
is supported by the currently connected AP. The driver may reject the
command if it cannot enable the SR with the configured parameters. The
driver sends events to userspace to indicate when SR feature is enabled
or disabled internally. Userspace can also query SR feature related
parameters and statistics from the driver/firmware as needed.
Change-Id: Ie203576d4ace691e37a1c5eea379f562bf416835
CRs-Fixed: 3298975
Adding compact tlv support for QCN9224, As part of this change
Rx tlv size will reduce from 384 bytes to 128 bytes.
Change-Id: I3f42a781e42b2e696a5b25d9c5f333c8cc83b7fe
CRs-Fixed: 3274152
With WIFI_MONITOR_SUPPORT=n and WLAN_TELEMETRY_STATS_SUPPORT=n,
declaration of struct cdp_peer_telemetry_stats within function
dp_monitor_peer_telemetry_stats is not visible.
Hence add WLAN_TELEMETRY_STATS_SUPPORT feature flag for function
dp_monitor_peer_telemetry_stats when WIFI_MONITOR_SUPPORT=n.
Change-Id: I2e4a789552296361c189552707d3e3c441a042e3
CRs-Fixed: 3310407
The function dp_monitor_reap_timer_suspend() is not
declared for WIFI_MONITOR_SUPPORT disabled case, which
will cause build failure.
To fix it, declare dp_monitor_reap_timer_suspend() in
'dp_internal.h' for WIFI_MONITOR_SUPPORT disabled case.
Change-Id: Id4d246975ccf9eec06a8c794fbbe71f8a934826b
CRs-Fixed: 3309771
Introduce the feature to hide SSID in the logs.
To enable this feature, set CONFIG_WLAN_TRACE_HIDE_SSID to y.
If this feature is enabled, SSID 'my_ssid' will be printed as
'*' in the logs.
Change-Id: Ibdafe1f202de805d9116d780f79f015a8a6bd2ee
CRs-Fixed: 3294362
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
Currently the driver is trying to notify the userspace
upon disconnect on partner link. If initial connection on
partner link fails and a NB disconnect was triggered at the
same time, moving the state machine to disconnecting, the driver
is clearing the mlo vdev flags.
To address this issue, check for the connection state
and clean up the mlo vdev flags after disconnect is complete.
CRs-Fixed: 3309091
Change-Id: I2e52ae225d33f3ff7be06e0a3abe8709f42012ee
Currently we cannot track vdev ref_cnt change with
peer creation and deletion. This change will help track
the vdev ref_cnt and detect if any pending unreference is
causing inactive vdevs.
Change-Id: I5548667b0f1541efb583f912f6b7ef8a88853f5b
CRs-Fixed: 3303571
Currently the mpdu level flags/values are obtained
from the MPDU_START tlv of each msdu, when processing
in the RX error path.
The MPDU_START tlv is valid in an msdu only if it is
the first msdu-in-mpdu and will not be valid for all
the subsequent msdus-in-mpdu.
Accessing and using the incorrect values from the
MPDU_START tlv leads to unwanted exception/behaviour.
To fix the above mentioned issue, cache the mpdu level
information from the tlv when processing the first
msdu-in-mpdu and use it for the processing of the
subsequent msdus from the same mpdu.
Change-Id: Ic0b47716d3d428bb0b536c4ee23c1392f183d1fe
CRs-Fixed: 3306327
For STA MLO connection, AP might send M1 right after assoc response
on assoc link, but at this monment, host has not sent wmi_peer_assoc
for the assoc link and no osif_rx is registered to dp_vdev, MLD peer
will not be initialized in FW side and no HTT MLO peer map msg to host,
then this M1 frame will be detected as no valid txrx_peer and dropped
in host as dp_vdev->osif_rx is NULL as well.
Store this M1 frame to cached buffer queue until CP register the osif_rx
to DP and then flush them back to stack.
Change-Id: Ie84fa9c39db75fe77b9fd61dc1bf46f2fa737df7
CRs-Fixed: 3289587
For STA MLO connection, the AP can send M1 right after assoc
response on assoc link, which will trigger sending keys to FW
for mlo links, but it can happen that wmi_peer_assoc is not
sent for mlo link until this time.
Current code does not have handling for this case.
To solve this, store the link vdev keys and send them once
link vdev is connected.
Change-Id: I882da96280711ca9cfa4d6ba852fda4a8b6d7a77
CRs-Fixed: 3293692
On the initiator side, Host needs to send
WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID to firmware before sending the
PASN Auth frame. Hence, move send_set_mac_addr_rx_filter_cmd_tlv() from
wmi_unified_p2p_tlv.c to wmi_unified_tlv.c file.
Change-Id: Ia5517dbdd5ec46f611537b12b7046e3a9d859082
CRs-Fixed: 3304909
Build failed once WLAN_TRACE_HIDE_MAC_ADDR is enabled,
due to 'error: type mismatch in conditional expression'.
To fix it, correct the parameter for QDF_MAC_ADDR_REF.
Change-Id: Ibcac7880af9a6029fe9fe8584349743249c45b86
CRs-Fixed: 3308194
