qcacmn: umac: mlme: Fix misspellings

Fix misspellings in umac/mlme/...

Change-Id: I3d9a890676ab15e250e283727b23bea6d10320e1
CRs-Fixed: 3304698

umac/mlme/connection_mgr/core/src/wlan_cm_bss_scoring.c

@@ -1394,7 +1394,7 @@ cm_calculate_etp_score(struct wlan_objmgr_psoc *psoc,
 #endif
 
 /**
- * cm_get_band_score() - Get band prefernce weightage
+ * cm_get_band_score() - Get band preference weightage
  * freq: Operating frequency of the AP
  * @score_config: Score configuration
  *
@@ -2122,7 +2122,7 @@ static int cm_calculate_bss_score(struct wlan_objmgr_psoc *psoc,
 	if (congestion_pct < CM_CONGESTION_THRSHOLD_FOR_BAND_OCE_SCORE) {
 		/*
 		 * If AP is on 5/6 GHZ channel , extra weigtage is added to BSS
-		 * score. if RSSI is greater tha 5g rssi threshold or fall in
+		 * score. if RSSI is greater than 5g rssi threshold or fall in
 		 * same bucket else give weigtage to 2.4 GHZ AP.
 		 */
 		if ((entry->rssi_raw > rssi_pref_5g_rssi_thresh) &&
@@ -2465,7 +2465,7 @@ bool wlan_cm_6ghz_allowed_for_akm(struct wlan_objmgr_psoc *psoc,
 		 * Check if any AKM is allowed as per user 6Ghz allowed AKM mask
 		 */
 		if (!(config->key_mgmt_mask_6ghz & key_mgmt)) {
-			mlme_debug("user configured mask %x didnt match AKM %x",
+			mlme_debug("user configured mask %x didn't match AKM %x",
 				   config->key_mgmt_mask_6ghz , key_mgmt);
 			return false;
 		}

umac/mlme/connection_mgr/core/src/wlan_cm_connect.c

@@ -759,7 +759,7 @@ static void cm_get_vdev_id_from_bssid(struct wlan_objmgr_pdev *pdev,
  * @cm_req: Connect request.
  *
  * As Connect is a blocking call this API will make sure the disconnect
- * doesnt timeout on any vdev and thus make sure that PEER/VDEV SM are cleaned
+ * doesn't timeout on any vdev and thus make sure that PEER/VDEV SM are cleaned
  * before vdev delete is sent.
  *
  * Return : true if disconnection is on any vdev_id
@@ -1423,7 +1423,7 @@ cm_handle_connect_req_in_non_init_state(struct cnx_mgr *cm_ctx,
 		 *    required to cleanup.
 		 *    so just add the connect request to the list.
 		 * 2. There is a connect request activated, followed by
-		 *    disconnect in pending queue. So keep the disconenct
+		 *    disconnect in pending queue. So keep the disconnect
 		 *    to cleanup the active connect and no action required to
 		 *    cleanup.
 		 */
@@ -1845,7 +1845,7 @@ static inline void cm_set_fils_connection(struct cnx_mgr *cm_ctx,
 
 	/*
 	 * Check and set only in case of failure and when
-	 * resp->is_fils_connection is not alredy set, else return.
+	 * resp->is_fils_connection is not already set, else return.
 	 */
 	if (QDF_IS_STATUS_SUCCESS(resp->connect_status) ||
 	    resp->is_fils_connection)
@@ -2182,7 +2182,7 @@ inline void cm_update_partner_link_scan_db(struct cnx_mgr *cm_ctx,
  * the connected AP entry.
  *
  * Context: Can be called from any context and to be used only if connect
- * is successful and SM is in conencted state. i.e. SM lock is hold.
+ * is successful and SM is in connected state. i.e. SM lock is hold.
  *
  * Return: void
  */
@@ -2318,7 +2318,7 @@ QDF_STATUS cm_notify_connect_complete(struct cnx_mgr *cm_ctx,
 	    sm_state == WLAN_CM_S_INIT &&
 	    cm_is_connect_id_reassoc_in_non_connected(cm_ctx, resp->cm_id)) {
 		resp->send_disconnect = true;
-		mlme_debug(CM_PREFIX_FMT "Set send disconnect to true to indicate disconnect instaed of connect resp",
+		mlme_debug(CM_PREFIX_FMT "Set send disconnect to true to indicate disconnect instead of connect resp",
 			   CM_PREFIX_REF(wlan_vdev_get_id(cm_ctx->vdev),
 					 resp->cm_id));
 	}

umac/mlme/connection_mgr/core/src/wlan_cm_disconnect.c

@@ -687,7 +687,7 @@ cm_handle_discon_req_in_non_connected_state(struct cnx_mgr *cm_ctx,
 		 * So no need to do anything here, just return failure and drop
 		 * disconnect.
 		 */
-		mlme_info("vdev %d droping disconnect req from source %d in INIT state",
+		mlme_info("vdev %d dropping disconnect req from source %d in INIT state",
 			  wlan_vdev_get_id(cm_ctx->vdev), cm_req->req.source);
 		return QDF_STATUS_E_ALREADY;
 	default:

umac/mlme/connection_mgr/core/src/wlan_cm_main.h

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2012-2015, 2020-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -57,7 +58,7 @@
  * @WLAN_CM_SS_IDLE:                    Idle state (no substate)
  * @WLAN_CM_SS_JOIN_PENDING:            Connect request not serialized
  * @WLAN_CM_SS_SCAN:                    Scan for SSID state
- * @WLAN_CM_SS_JOIN_ACTIVE:             Conenct request activated
+ * @WLAN_CM_SS_JOIN_ACTIVE:             Connect request activated
  * @WLAN_CM_SS_PREAUTH:                 Roam substate of preauth stage
  * @WLAN_CM_SS_REASSOC:                 Roam substate for reassoc state
  * @WLAN_CM_SS_ROAM_STARTED:            Roaming in progress (LFR 3.0)
@@ -231,7 +232,7 @@ struct cm_req_history {
  * this is used to get which command to flush from serialization during
  * host roaming.
  * @req_list: connect/disconnect req list
- * @cm_req_lock: lock to manupulate/read the cm req list
+ * @cm_req_lock: lock to manipulate/read the cm req list
  * @disconnect_count: disconnect count
  * @connect_count: connect count
  * @force_rsne_override: if QCA_WLAN_VENDOR_ATTR_CONFIG_RSN_IE is set by

umac/mlme/connection_mgr/core/src/wlan_cm_main_api.h

@@ -906,7 +906,7 @@ bool cm_is_vdev_connected(struct wlan_objmgr_vdev *vdev);
 bool cm_is_vdev_active(struct wlan_objmgr_vdev *vdev);
 
 /**
- * cm_is_vdev_disconnecting() - check if vdev is in disconneting state
+ * cm_is_vdev_disconnecting() - check if vdev is in disconnecting state
  * @vdev: vdev pointer
  *
  * Return: bool
@@ -983,7 +983,7 @@ cm_get_active_req_type(struct wlan_objmgr_vdev *vdev);
  * @vdev: vdev pointer
  * @req: pointer to the copy of the active connect request
  * *
- * Context: Should be called only in the conext of the
+ * Context: Should be called only in the context of the
  * cm request activation
  *
  * Return: true and connect req if any request is active
@@ -996,7 +996,7 @@ bool cm_get_active_connect_req(struct wlan_objmgr_vdev *vdev,
  * @vdev: vdev pointer
  * @req: pointer to the copy of the active disconnect request
  * *
- * Context: Should be called only in the conext of the
+ * Context: Should be called only in the context of the
  * cm request activation
  *
  * Return: true and disconnect req if any request is active

umac/mlme/connection_mgr/core/src/wlan_cm_roam.h

@@ -90,7 +90,7 @@ QDF_STATUS cm_reassoc_complete(struct cnx_mgr *cm_ctx,
  * @vdev: vdev pointer
  * @req: pointer to the copy of the active reassoc request
  * *
- * Context: Should be called only in the conext of the
+ * Context: Should be called only in the context of the
  * cm request activation
  *
  * Return: true and reassoc req if any request is active

umac/mlme/connection_mgr/dispatcher/inc/cfg_mlme_score_params.h

@@ -167,7 +167,7 @@
 
 /*
  * <ini>
- * chan_band_weightage - Channel Band perferance to 5GHZ to
+ * chan_band_weightage - Channel Band preference to 5GHZ to
  * calculate best candidate
  * @Min: 0
  * @Max: 100

umac/mlme/connection_mgr/dispatcher/inc/wlan_cm_api.h

@@ -157,7 +157,7 @@ void wlan_cm_set_max_connect_timeout(struct wlan_objmgr_vdev *vdev,
 				     uint32_t max_connect_timeout);
 
 /**
- * wlan_cm_is_vdev_connecting() - check if vdev is in conneting state
+ * wlan_cm_is_vdev_connecting() - check if vdev is in connecting state
  * @vdev: vdev pointer
  *
  * Return: bool
@@ -165,7 +165,7 @@ void wlan_cm_set_max_connect_timeout(struct wlan_objmgr_vdev *vdev,
 bool wlan_cm_is_vdev_connecting(struct wlan_objmgr_vdev *vdev);
 
 /**
- * wlan_cm_is_vdev_connected() - check if vdev is in conneted state
+ * wlan_cm_is_vdev_connected() - check if vdev is in connected state
  * @vdev: vdev pointer
  *
  * Return: bool
@@ -173,7 +173,7 @@ bool wlan_cm_is_vdev_connecting(struct wlan_objmgr_vdev *vdev);
 bool wlan_cm_is_vdev_connected(struct wlan_objmgr_vdev *vdev);
 
 /**
- * wlan_cm_is_vdev_active() - check if vdev is in active state ie conneted or
+ * wlan_cm_is_vdev_active() - check if vdev is in active state ie connected or
  * roaming state
  * @vdev: vdev pointer
  *
@@ -182,7 +182,7 @@ bool wlan_cm_is_vdev_connected(struct wlan_objmgr_vdev *vdev);
 bool wlan_cm_is_vdev_active(struct wlan_objmgr_vdev *vdev);
 
 /**
- * wlan_cm_is_vdev_disconnecting() - check if vdev is in disconneting state
+ * wlan_cm_is_vdev_disconnecting() - check if vdev is in disconnecting state
  * @vdev: vdev pointer
  *
  * Return: bool
@@ -273,7 +273,7 @@ bool wlan_cm_is_vdev_roam_reassoc_state(struct wlan_objmgr_vdev *vdev)
  * @vdev: vdev pointer
  * @req: pointer to the copy of the active connect request
  * *
- * Context: Should be called only in the conext of the
+ * Context: Should be called only in the context of the
  * cm request activation
  *
  * Return: true and connect req if any request is active
@@ -287,7 +287,7 @@ bool wlan_cm_get_active_connect_req(struct wlan_objmgr_vdev *vdev,
  * @vdev: vdev pointer
  * @req: pointer to the copy of the active reassoc request
  * *
- * Context: Should be called only in the conext of the
+ * Context: Should be called only in the context of the
  * cm request activation
  *
  * Return: true and reassoc req if any request is active
@@ -308,7 +308,7 @@ bool wlan_cm_get_active_reassoc_req(struct wlan_objmgr_vdev *vdev,
  * @vdev: vdev pointer
  * @req: pointer to the copy of the active disconnect request
  * *
- * Context: Should be called only in the conext of the
+ * Context: Should be called only in the context of the
  * cm request activation
  *
  * Return: true and disconnect req if any request is active

umac/mlme/connection_mgr/dispatcher/inc/wlan_cm_bss_score_param.h

@@ -107,28 +107,28 @@ struct rssi_config_score  {
 };
 
 /**
- * struct per_slot_score - define % score for differents slots for a
+ * struct per_slot_score - define % score for different slots for a
  *                               scoring param.
  * num_slot: number of slots in which the param will be divided.
  *           Max 15. index 0 is used for 'not_present. Num_slot will
  *           equally divide 100. e.g, if num_slot = 4 slot 0 = 0-25%, slot
  *           1 = 26-50% slot 2 = 51-75%, slot 3 = 76-100%
- * score_pcnt3_to_0: Conatins score percentage for slot 0-3
+ * score_pcnt3_to_0: Contains score percentage for slot 0-3
  *             BITS 0-7   :- the scoring pcnt when not present
  *             BITS 8-15  :- SLOT_1
  *             BITS 16-23 :- SLOT_2
  *             BITS 24-31 :- SLOT_3
- * score_pcnt7_to_4: Conatins score percentage for slot 4-7
+ * score_pcnt7_to_4: Contains score percentage for slot 4-7
  *             BITS 0-7   :- SLOT_4
  *             BITS 8-15  :- SLOT_5
  *             BITS 16-23 :- SLOT_6
  *             BITS 24-31 :- SLOT_7
- * score_pcnt11_to_8: Conatins score percentage for slot 8-11
+ * score_pcnt11_to_8: Contains score percentage for slot 8-11
  *             BITS 0-7   :- SLOT_8
  *             BITS 8-15  :- SLOT_9
  *             BITS 16-23 :- SLOT_10
  *             BITS 24-31 :- SLOT_11
- * score_pcnt15_to_12: Conatins score percentage for slot 12-15
+ * score_pcnt15_to_12: Contains score percentage for slot 12-15
  *             BITS 0-7   :- SLOT_12
  *             BITS 8-15  :- SLOT_13
  *             BITS 16-23 :- SLOT_14
@@ -224,7 +224,7 @@ enum cm_security_idx {
  * @rssi_score: Rssi related config for scoring config
  * @esp_qbss_scoring: esp and qbss related scoring config
  * @oce_wan_scoring: oce related scoring config
- * @bandwidth_weight_per_index: BW wight per index
+ * @bandwidth_weight_per_index: BW weight per index
  * @nss_weight_per_index: nss weight per index
  * @band_weight_per_index: band weight per index
  * @is_bssid_hint_priority: True if bssid_hint is given priority
@@ -369,7 +369,7 @@ void wlan_cm_set_check_6ghz_security(struct wlan_objmgr_psoc *psoc,
 				     bool value);
 
 /**
- * wlan_cm_reset_check_6ghz_security() - reset check 6Ghz security to orignal
+ * wlan_cm_reset_check_6ghz_security() - reset check 6Ghz security to original
  * value
  * @psoc: pointer to psoc object
  *
@@ -378,7 +378,7 @@ void wlan_cm_set_check_6ghz_security(struct wlan_objmgr_psoc *psoc,
 void wlan_cm_reset_check_6ghz_security(struct wlan_objmgr_psoc *psoc);
 
 /**
- * wlan_cm_get_check_6ghz_security() - Get 6Ghz allowe AKM mask
+ * wlan_cm_get_check_6ghz_security() - Get 6Ghz allowed AKM mask
  * @psoc: pointer to psoc object
  * @value: value to be set
  *
@@ -387,7 +387,7 @@ void wlan_cm_reset_check_6ghz_security(struct wlan_objmgr_psoc *psoc);
 bool wlan_cm_get_check_6ghz_security(struct wlan_objmgr_psoc *psoc);
 
 /**
- * wlan_cm_set_6ghz_key_mgmt_mask() - Set 6Ghz allowe AKM mask
+ * wlan_cm_set_6ghz_key_mgmt_mask() - Set 6Ghz allowed AKM mask
  * @psoc: pointer to psoc object
  *
  * Return: void
@@ -396,7 +396,7 @@ void wlan_cm_set_6ghz_key_mgmt_mask(struct wlan_objmgr_psoc *psoc,
 				    uint32_t value);
 
 /**
- * wlan_cm_get_6ghz_key_mgmt_mask() - Get 6Ghz allowe AKM mask
+ * wlan_cm_get_6ghz_key_mgmt_mask() - Get 6Ghz allowed AKM mask
  * @psoc: pointer to psoc object
  *
  * Return: value

umac/mlme/connection_mgr/dispatcher/inc/wlan_cm_public_struct.h

@@ -425,7 +425,7 @@ struct fils_connect_rsp_params {
 /**
  * struct connect_rsp_ies - connect rsp ies stored in vdev filled during connect
  * @bcn_probe_rsp: Raw beacon or probe rsp of connected AP
- * @assoc_req: assoc req IE pointer send during conenct
+ * @assoc_req: assoc req IE pointer send during connect
  * @assoc_rsq: assoc rsp IE received during connection
  * @fills_ie: fills connection ie received during connection
  */

umac/mlme/connection_mgr/dispatcher/inc/wlan_cm_ucfg_api.h

@@ -88,7 +88,7 @@ bool ucfg_cm_is_vdev_connected(struct wlan_objmgr_vdev *vdev);
 bool ucfg_cm_is_vdev_active(struct wlan_objmgr_vdev *vdev);
 
 /**
- * ucfg_cm_is_vdev_disconnecting() - check if vdev is in disconneting state
+ * ucfg_cm_is_vdev_disconnecting() - check if vdev is in disconnecting state
  * @vdev: vdev pointer
  *
  * Return: bool

umac/mlme/connection_mgr/utf/inc/wlan_cm_utf.h

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -61,7 +62,7 @@
 #define CFG_WLAN_CM_UTF_PARAM CFG(CFG_WLAN_CM_UTF)
 /**
  * enum wlan_cm_utf_test - CM UTF Test ID
- * @CM_UTF_ID_CONNECT_SUCCESS: Connect Succes
+ * @CM_UTF_ID_CONNECT_SUCCESS: Connect Success
  * @CM_UTF_ID_DISCONNECT_SUCCESS: Disconnect Success
  * @CM_UTF_ID_PEER_CREATE_FAILURE: Peer Create Failure
  * @CM_UTF_ID_PEER_CREATE_TIMEOUT: No Peer Create Response

umac/mlme/connection_mgr/utf/src/wlan_cm_utf_scan.c

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -15,7 +16,7 @@
  */
 
 /*
- * DOC: Implements scan functinality for CM UTF
+ * DOC: Implements scan functionality for CM UTF
  */
 
 #ifdef FEATURE_CM_UTF_ENABLE

umac/mlme/include/wlan_mlme_cmn.h

@@ -482,7 +482,7 @@ QDF_STATUS mlme_vdev_enqueue_exp_ser_cmd(struct vdev_mlme_obj *vdev_mlme,
 					 uint8_t cmd_type);
 
 /**
- * mlme_vdev_ops_start_fw_send - Send WMI START/RESTART commmand to FW
+ * mlme_vdev_ops_start_fw_send - Send WMI START/RESTART command to FW
  * @vdev:  VDEV object
  *
  * API to send WMI start/restart command to FW
@@ -495,7 +495,7 @@ QDF_STATUS mlme_vdev_ops_start_fw_send(struct wlan_objmgr_vdev *vdev,
 
 /**
  * mlme_vdev_ops_multivdev_restart_fw_cmd_send - Send WMI Multivdev restart
- *                                              commmand to FW
+ *                                              command to FW
  * @pdev:  PDEV object
  *
  * API to send WMI multivdev restart command to FW
@@ -507,7 +507,7 @@ QDF_STATUS mlme_vdev_ops_multivdev_restart_fw_cmd_send(
 						struct wlan_objmgr_pdev *pdev);
 
 /**
- * mlme_vdev_ops_stop_fw_send - Send WMI STOP commmand to FW
+ * mlme_vdev_ops_stop_fw_send - Send WMI STOP command to FW
  * @vdev:  VDEV object
  *
  * API to send WMI stop command to FW
@@ -518,7 +518,7 @@ QDF_STATUS mlme_vdev_ops_multivdev_restart_fw_cmd_send(
 QDF_STATUS mlme_vdev_ops_stop_fw_send(struct wlan_objmgr_vdev *vdev);
 
 /**
- * mlme_vdev_ops_down_fw_send - Send WMI Down commmand to FW
+ * mlme_vdev_ops_down_fw_send - Send WMI Down command to FW
  * @vdev:  VDEV object
  *
  * API to send WMI down command to FW

umac/mlme/include/wlan_psoc_mlme.h

@@ -56,8 +56,8 @@ struct wlan_6ghz_rnr_global_cache {
  * @eht_cap: If dev is configured as EHT capable
  * @vht_24G_cap:If dev is configured as VHT capable for 2.4Ghz
  * @beamformee_cap:If dev is configured as BF capable
- * @bw_above_20_5ghz: BW greater than 20Mhz supprted for 5Ghz
- * @bw_above_20_24ghz: BW greater than 20Mhz supprted for 2.4Ghz
+ * @bw_above_20_5ghz: BW greater than 20Mhz supported for 5Ghz
+ * @bw_above_20_24ghz: BW greater than 20Mhz supported for 2.4Ghz
  * @max_chan_switch_ie: If max channel switch IE is supported
  */
 struct psoc_phy_config {

umac/mlme/include/wlan_vdev_mlme.h

@@ -394,7 +394,7 @@ struct wlan_vdev_aid_mgr {
 /**
  * struct vdev_mlme_mgmt_ap - ap specific vdev mlme mgmt cfg
  * @hidden_ssid: flag to indicate whether it is hidden ssid
- * @cac_duration_ms: cac duration in millseconds
+ * @cac_duration_ms: cac duration in milliseconds
  * @aid_mgr: AID bitmap mgr
  * @max_chan_switch_time: Max channel switch time in milliseconds.
  * @last_bcn_ts_ms: Timestamp (in milliseconds) of the last beacon sent on the

umac/mlme/mlme_objmgr/dispatcher/inc/wlan_vdev_mlme_main.h

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -110,7 +110,7 @@ enum wlan_vdev_state {
  * @WLAN_VDEV_SM_EV_DFS_CAC_COMPLETED:   Notifies on CAC completion
  * @WLAN_VDEV_SM_EV_DOWN:                Invokes VDEV DOWN operation
  * @WLAN_VDEV_SM_EV_CONNECTION_FAIL:     Notifications for UP/connection failure
- * @WLAN_VDEV_SM_EV_STOP_RESP:           Notifcation of stop response
+ * @WLAN_VDEV_SM_EV_STOP_RESP:           Notification of stop response
  * @WLAN_VDEV_SM_EV_STOP_FAIL:           Notification of stop req failure
  * @WLAN_VDEV_SM_EV_DOWN_FAIL:           Notification of down failure
  * @WLAN_VDEV_SM_EV_DISCONNECT_COMPLETE: Notification of Peer cleanup complete

umac/mlme/vdev_mgr/core/src/vdev_mlme_sm.h

@@ -134,7 +134,7 @@ static inline QDF_STATUS mlme_vdev_validate_basic_params(
  * @event_data_len: data size
  * @event_data: event data
  *
- * API resets the protocol params fo vdev
+ * API resets the protocol params of vdev
  *
  * Return: SUCCESS on successful reset
  *         FAILURE, if it fails due to any
@@ -668,7 +668,7 @@ static inline void mlme_vdev_start_rsp_notify_mlo_mgr(
 }
 
 /**
- * mlme_vdev_down_cmpl_notify_mlo_mgr - notify mlo link is down complate
+ * mlme_vdev_down_cmpl_notify_mlo_mgr - notify mlo link is down complete
  * @vdev_mlme_obj:  VDEV MLME comp object
  *
  * Return: VOID.

umac/mlme/vdev_mgr/dispatcher/inc/wlan_vdev_mgr_tgt_if_tx_defs.h

@@ -128,7 +128,7 @@ enum wlan_mlme_host_start_event_param {
 };
 
 /**
- * enum wlan_mlme_custom_aggr_type: custon aggregate type
+ * enum wlan_mlme_custom_aggr_type: custom aggregate type
  * @WLAN_MLME_CUSTOM_AGGR_TYPE_AMPDU: A-MPDU aggregation
  * @WLAN_MLME_CUSTOM_AGGR_TYPE_AMSDU: A-MSDU aggregation
  * @WLAN_MLME_CUSTOM_AGGR_TYPE_MAX: Max type
@@ -213,7 +213,7 @@ struct tbttoffset_params {
  * @vdev_id: Vdev id
  * @hw_link_id: Unique hw link id across SoCs
  * @beacon_interval: Beacon interval
- * @csa_switch_count_offset: CSA swith count offset in beacon frame
+ * @csa_switch_count_offset: CSA switch count offset in beacon frame
  * @ext_csa_switch_count_offset: ECSA switch count offset in beacon frame
  * @per_sta_profile_offset: Pointer to per-STA profile info
  * @quiet_ie_offset: Quiet IE offset
@@ -268,7 +268,7 @@ struct mlo_bcn_tmpl_ml_info {
  * @mbssid_ie_offset: mbssid ie offset
  * @tmpl_len: beacon template length
  * @tmpl_len_aligned: beacon template alignment
- * @csa_switch_count_offset: CSA swith count offset in beacon frame
+ * @csa_switch_count_offset: CSA switch count offset in beacon frame
  * @ext_csa_switch_count_offset: ECSA switch count offset in beacon frame
  * @esp_ie_offset: ESP IE offset in beacon frame
  * @mu_edca_ie_offset: Mu EDCA IE offset in beacon frame