The following changes are made
-Yield dp_rx_process if poll time exceeds
-Yield dp_tx_comp_handler if poll time exceeds
-Interrupt statistics to track various interrupt contexts and
corresponding interrupt masks
-Add poll times histogram buckets to NAPI stats
Change-Id: I8c7a6bbbb97c7b3dd1dde6ac3a97113c433086a2
CRs-Fixed: 2423879
1) Add one counter to track the invaild TX release source
2) Capture he descriptor that caused the issue
3) Print the invalid release source
CRs-Fixed: 2380964
Change-Id: I0dc410ae2e7c9df58ef53e3f20ca7979d086659e
Observed that when IPA offload is enabled, RX packets
are not routed correctly to IPA ring. Currently only
IX0 of REO_DESTINATION_CTRL_IX registers are remapped,
which only covers 3-bit reo_destination_indication of
range 0 to 7.
Fix is to remap REO_DESTINATION_CTRL_IX2|3 registers
so that reo_destination_indication of range 16 to
31 can also be routed REO2IPA ring when IPA offload
is enabled. Upon IPA offload is disabled, save values
of IX2 and IX3 are reset back to HW.
Change-Id: I3428b450ab10076d27c7628a3729e8cec088bd94
CRs-Fixed: 2434331
Revert change "Limit maxinum nss number as 2 for MCL platform" and
align with WIN function: hal_rx_msdu_start_nss_get_8074v2().
besides, only increase rx.nss[NSS - 1] when NSS is > 0 and rx packet
type is 11N/AC/AX.
Change-Id: I0a64f00a3d252c806216cc3196e71290f111c88a
CRs-Fixed: 2429329
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
Modify aging timout in reo based on access category
to match cascade.
For BE, BK, VI use 100ms and VO uses 40ms.
Change-Id: I09267b6540460a13728bddc92a7e72157d6ce569
Crs-fixed: 2418294
Populate LTF size value from TLV for HE and modify
HE_LTF enum value to match with Firmware values
Change-Id: I8e5cce31cbae4aa8722050b06d89c933b74aa752
On low memory platform rx_pkt_header tlv is not subscribed to get a
savings of 128bytes in skb. This is required to reduce the skb size from
4K to 2K on 32-bit platforms. Use HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG
message to unsubscribe rx_pkt_header tlv for rxdma ring.
Change-Id: Ie684f1ca1de9c824a869b4e13fd0ee1d068004e7
CRs-Fixed: 2408424
Do not process RX packet header TLV for low memory config profile.
Also, drop decapped frames in invalid peer processing function.
Change-Id: Ifc7721bb25d85c7e277bebf4b962d2f1bfea150c
CRs-Fixed: 2395508
Some of the print messages in HAL module come very excessively.
Use hal_verbose_debug() API to print them.
CRs-fixed: 2405028
Change-Id: I4b4754af65c00edb571de898527026b6183ef15f
In PPDU Rx stats GI value for HE displaying wrong,
because of wrong enum values. Corrected enum values
to match GI values to Tx stats.
Also LDPC shows always 0 in PPDU Rx stats for HE.
Populated LDPC value for HE case as well to display
in PPDU Rx stats.
Change-Id: I6054d3e8c8e8672bcc2d43daa8a6e2a1bc859985
Set the RING_ID_DISABLE flag for WBM_IDLE_LINK ring during
hal_srng_src_hw_init_generic.
Change-Id: I725b14a35f453e416a3721fd6c1b68ce59a8c1c0
CRs-Fixed: 2392172
Currently RING_ID_DISABLE field of the
UMAC_WBM_R0_WBM_IDLE_LINK_RING_MISC register is set to 0. In this
configuration, the producer ring may take the libery of snooping the
datastruct passing through it. This may cause 12 MSBs of the last dword
to be replaced by RING_ID field. This happens when ENTRY_SIZE of the
ring is 2.
Set RING_ID_DISABLE (=1) to avoid this snooping.
Change-Id: I40f71131f8fd27871597dd254fb37ce4614fe92a
CRs-Fixed: 2392172
Host SW should not update the cached TP pointer to HW register before
current cached TP REO entry finishes processing, otherwise there is
risk if HW HP catches up to this cached TP, but HW TP value has been
updated to (cached TP + one entry size) now, this TP REO entry might
be overwritten.
Refine it and only update TP pointer to HW when entry processing has done.
Change-Id: I54df3247745717855a67649f440c606c518efd61
CRs-Fixed: 2391658
Currently hal shadow pointers after memory allocation
are not memset to zero. In case of SMMU S1 enable when
host starts to access hal srng the random value of shadow
memory is copied to host cached values which leads to accessing
the rings even when HW has not updated to it. So zero out
the memory of hal shadow ring pointers after memory allocation.
Change-Id: I10ac6bfff957e953ee9caa15056ce3fa9d57b70e
CRs-Fixed: 2368491
As a hot fix before h\w part change, just limit maxinum nss number
to 2 for MCL platform.
CRs-Fixed: 2377796
Change-Id: Iad205804be90b6803ff2f1afa79076dde9b77013
once in a while the HW is sending a descriptor which
is already processed by host. This can be a potential HW
issue, as a WAR we are not processing such duplicate descriptors
instead increment a counter and continue with next descriptor.
Change-Id: I6c9bc6a9fb4705b42284171a32855411aa5dd73f
CRs-Fixed: 2338543
According to the ucode and mac team, the new TB-PPDU (UL OFDMA
Dat frame) from any other users using the TLV's fields below:
* PHYRX_RSSI_LEGACY (has a reception type field that is
set to UL-MU)
* PHYRX_RSSI_HT
* PHYRX_COMMON_USER_INFO (has a reception type field that is
set to UL-MU)
* PHYRX_USER_INFO (has more detailed modulation info)
* PHYRX_USER_INFO (Could be more than one)
...
* PHYRX_DATA
* PHYRX_DATA (Could be more than one)
CRs-Fixed: 2329959
Change-Id: Ib5fa1734a5525d2b2d1db8756166f259be30b9c0
This change will resolve displaying NSS value
in stats in case of HT. And also it will give
proper NSS value to calculate rate value. Modify MCS
value to match with Tx stats from firmware.
Also retain original MCS value to use in radiotap code
for HT case.
Change-Id: I4dad068262a5e9188a5935db6b2cbf8d14138e7e
Currently we are printing one single big print to dump the RX TLVS. This
is causing truncation at the QDF_TRACE level, which can accommodate only
512 bytes or so right now. Split the RX TLV print, so that it can fit
int the QDF buffer.
CRs-Fixed: 2370080
Change-Id: I1385ab0dfe2a52e34132487ac55973e291d84db5
Added missed hal_get_hw_hptp_generic
'Get HW head and tail pointer value for any ring' to ipq6018.
Change-Id: Idc4b595ab6c52558542cf6f87e36f590bf93123f
Functions hal_update_srng_hp_tp_address and hal_set_one_shadow_config
are dumping a lot of information, which is not needed.
Reduce INFO log levels to DEBUG.
Change-Id: I210cd5493d758685312b7851eb37e05ce93b6071
CRs-Fixed: 2342960
In monitor mode, the packet type is wrongly filled radiotap header as
11n when the actual incoming packet is 11b frame.
The packet type field is common for all MPDUs and is obtained from
PPDU_END_USER_STATS and hence no need to overwrite that value from the
MPDU specific TLV in the function hal_rx_mon_hw_desc_get_mpdu_status
Change-Id: I97f96e64012636f562f7ac2e4a91b63ffc7553db
CRs-Fixed: 2333915
To avoid race conditions where BA window size can change, always
flush entire REO descriptor from HW cache irrespective of current
BA window size.
Change-Id: I608996722e7dc2dc6acfd145b8c190b58ce09822
CRs-Fixed: 2251811
- Support to pass IPA enabled(disabled) flag from ini to DP layer
- Use ioremap call to translate tx_comp_doorbell_paddr obtained from
calling ipa_setup api to tx_comp_doorbell_vaddr. This is needed to
write the initial value of HP at the doorbell address.
- Change REO_DST_RING_SIZE and WLAN_CFG_TX_RING_SIZE to 1023
for napier/hastings if IPA is enabled. This is needed because,
ipa_setup API can handle only 16-bit values for the size param(bytes)
of the ring.
- Disable hash based flow steering for SAP peers in case IPA is enabled
and set default reo_dest_ring_4 as default RX ring. Since IPA will be
reaping RX packets from reo_dest_ring_4 only, flow steering is not
needed for SAP peers.
- Unmap pre-allocated TX buffers for IPA in the TX completion ring.
- Donot execute IPA functionality if IPA is disabled from ini.
Change-Id: I6855bfe293a457ccc0abd1ad5567f5c95232a9d2
CRs-Fixed: 2183519
So far, only HE_TRIG packet type parsing is supported for TB-PPDU
(OFDMA UL)frames, which is not enough for plugfest tests. Add all
radiotap dissecting from HE Data 1 to HE Data 6
CRs-Fixed: 2316408
Change-Id: I49d91d4981291827b20f325d459fd1e60f3cc271
Functions hal_rx_wbm_err_info_get, hal_tx_comp_get_release_reason,
hal_rx_dump_mpdu_start_tlv uses some hardware macros directly and the
value differs between qca8074v1 and qca8074v2 targets.
Move these functions to generic api file and compile it per target.
Change-Id: Ib78fb6e69238577aac64da3f60f38a72cee316b0
keep hal tx and rx functions grouped as it will look clean
and avoid confusions while browsing code for others.
Change-Id: I519690d42cd077689bf7afe697908f43d7055da5
Do null check before servicing the ring. When dp_service_srngs()
is common API which gets called when interrupt gets fired for
any ring. Within this API, driver goes one by one to each ring
and service the rings as it is not obvious from interrupt line that
which particular service ring needs to be served.
So race happens when rings are getting initialized and packet has been
arrived to one of the rings. Due to dp_service_srngs() API's
implementation, driver goes to one by one each ring without checking
if all rings are initialized.
CRs-Fixed: 2310496
Change-Id: I3c8f668756c8d266abe082e8473d54cb4df9065e
Instead of frame control info valid parameter data sequence
control parameter was passed, corrected it
Change-Id: Iccaeb286c1003cbb58c5ebcacf4b0d99c979cbbc
- Change the SR mapping address for QCA6390
- Use ring direction field from HAL ring config instead of HAL ring
directly as ring is not yet initialized here.
Change-Id: I900b2329367cc02ae2f9d7f164e5f867d8253d90
CRs-Fixed: 2299919
1. Disable host processing of REO2SW4 when IPA is enabled.
2. Change buffer memory location provide to IPA TX transfer
ring from consistent to non-consistent memory.
Change-Id: Ibb62d9faf5dc9adb5ee8a2e113d10a2912269cbd
CRs-Fixed: 2315889
CE service file includes APIs for both legacy and lithium
architecture.
These are getting compiled for both targets today. Separate the CE
services into legacy and srng and selectively compile based on
targets present in the SoC.
Note: Generic APIs implemented for both legacy and SRNG services
are separated out through this change. Fast path implementation
will be de-coupled from common service and moved to legacy source
in a follow-up change.
CRs-Fixed: 2258640
Change-Id: If86c21c0bf560a360474c9efcdbcd4841a09828d
