Read rssi_chain per nss per bw and from rx status TLVs
and update to host data structures.
CRs-Fixed: 2445933
Change-Id: I275e9e502a0a724410fc189ac293cadc8f2981e0
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
Modify aging timout in reo based on access category
to match cascade.
For BE, BK, VI use 100ms and VO uses 40ms.
Change-Id: I09267b6540460a13728bddc92a7e72157d6ce569
Crs-fixed: 2418294
Populate LTF size value from TLV for HE and modify
HE_LTF enum value to match with Firmware values
Change-Id: I8e5cce31cbae4aa8722050b06d89c933b74aa752
Some of the print messages in HAL module come very excessively.
Use hal_verbose_debug() API to print them.
CRs-fixed: 2405028
Change-Id: I4b4754af65c00edb571de898527026b6183ef15f
In PPDU Rx stats GI value for HE displaying wrong,
because of wrong enum values. Corrected enum values
to match GI values to Tx stats.
Also LDPC shows always 0 in PPDU Rx stats for HE.
Populated LDPC value for HE case as well to display
in PPDU Rx stats.
Change-Id: I6054d3e8c8e8672bcc2d43daa8a6e2a1bc859985
Set the RING_ID_DISABLE flag for WBM_IDLE_LINK ring during
hal_srng_src_hw_init_generic.
Change-Id: I725b14a35f453e416a3721fd6c1b68ce59a8c1c0
CRs-Fixed: 2392172
According to the ucode and mac team, the new TB-PPDU (UL OFDMA
Dat frame) from any other users using the TLV's fields below:
* PHYRX_RSSI_LEGACY (has a reception type field that is
set to UL-MU)
* PHYRX_RSSI_HT
* PHYRX_COMMON_USER_INFO (has a reception type field that is
set to UL-MU)
* PHYRX_USER_INFO (has more detailed modulation info)
* PHYRX_USER_INFO (Could be more than one)
...
* PHYRX_DATA
* PHYRX_DATA (Could be more than one)
CRs-Fixed: 2329959
Change-Id: Ib5fa1734a5525d2b2d1db8756166f259be30b9c0
This change will resolve displaying NSS value
in stats in case of HT. And also it will give
proper NSS value to calculate rate value. Modify MCS
value to match with Tx stats from firmware.
Also retain original MCS value to use in radiotap code
for HT case.
Change-Id: I4dad068262a5e9188a5935db6b2cbf8d14138e7e
Currently we are printing one single big print to dump the RX TLVS. This
is causing truncation at the QDF_TRACE level, which can accommodate only
512 bytes or so right now. Split the RX TLV print, so that it can fit
int the QDF buffer.
CRs-Fixed: 2370080
Change-Id: I1385ab0dfe2a52e34132487ac55973e291d84db5
So far, only HE_TRIG packet type parsing is supported for TB-PPDU
(OFDMA UL)frames, which is not enough for plugfest tests. Add all
radiotap dissecting from HE Data 1 to HE Data 6
CRs-Fixed: 2316408
Change-Id: I49d91d4981291827b20f325d459fd1e60f3cc271
Functions hal_rx_wbm_err_info_get, hal_tx_comp_get_release_reason,
hal_rx_dump_mpdu_start_tlv uses some hardware macros directly and the
value differs between qca8074v1 and qca8074v2 targets.
Move these functions to generic api file and compile it per target.
Change-Id: Ib78fb6e69238577aac64da3f60f38a72cee316b0
Instead of frame control info valid parameter data sequence
control parameter was passed, corrected it
Change-Id: Iccaeb286c1003cbb58c5ebcacf4b0d99c979cbbc
Rx reception type for packet was populated from
wrong TLV. Populate reception type based on
HT,VHT or HE TLV tags
Change-Id: I3240a9f029b0bfeee8833761531e086bc5df6f91
HE format in radiotap header are not being updated for HE_TRIG
frames. Add support for it. This is to support MU-OFDMA frames of
UL.
CRs-Fixed: 2223635
Change-Id: If0a93f6047185bcc51948b613d48d13ecb5e16cd
Set monitor direct filter when smart monitor is
enabled. Deliver header from NAC if md bit is set
and smart mesh feature is used.
Change-Id: If1ef865e013c21bbb58bcb89a87856b12d6c7278
Crs-fixed: 2246660
Some of the macro names defined in qca8074v1, are defined with
a slightly different name in qca8074v2, and few macros have the
same name in both headers but are defined with different values.
Fixed the same.
Change-Id: I5e948baf5326d1d8fdfa2bd7ee8aa072c710d17c
