during devm_snd_soc_register_card(), the name_prefix can be set
if "sound-name-prefix" is provided in the DT nodes.
The original approach to set prefix would possibly cause ASoC
component probe failed if prefix has not set before probe is called
Change-Id: Ie78d042cda24b7d1d926223d476786e13d965ac7
Signed-off-by: Junkai Cai <quic_junkai@quicinc.com>
Interrupt from wsa884x are not handle as slave_irq is not set.
Add slave_irq for wsa884x to address this issue.
Change-Id: I82edb35b55f6a46d79bd96b7f0f4bfac58583860
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
In case of error scenario for get_tdm_clk_id/get_mi2s_clk_id, storing the
return value into uint32 clk_id which is always positive and does not handle
the invalid clk ids failure. So modify the incorrect comparsion.
Change-Id: I1e606709cd3c11a24a39679bcee638a045804961
Signed-off-by: Prasad Kumpatla <pkumpatl@codeaurora.org>
When interrupts are triggered on the second or third interrupt
status register, current logic cannot clear that interrupt status
after handling it. Enable use_single_read for wsa and wcd regmap
to resolve the issue.
Change-Id: Ieac57e169505d4455dde1dcd0e80e222e3e8eb1e
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Simplify register write logic for PCM ports due to multi-ee changes.
Update SWRM_MCP_CTRL to SWRM_CLK_CTRL(ee).
Change-Id: I36e78f3f2abdb65925b141d5192adf618697d674
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Conforms to latest hardware DRE documentation
Change-Id: Ia08b03f519697723e9e260451c5bc68b4b45724c
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
For SVA usecase, BCS is not needed. For other usecase,
BCS is enabled. When voicecall and SVA are running
concurrently and do device switch between headset-mic
and handset-mic, BCS SWR port may not get closed when
teardown headset-mic. When closing ADC2, check BCS_STATUS_MASK
only and remove check for bcs_disabled flag to make sure
BCS SWR port is closed.
Change-Id: I01b1cadc0143a4f46eb6a04c3fc8a2509aa13ec3
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
With moisture_en flag being set as true for legacy moisture detection,
need to check if duty cycle is also enabled so as to report headset
insertion/removal properly when moisture detection enabled.
Change-Id: I6014e2e047d7c33b16bf9229ee1901fd8d042b47
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
If the userspace which has allocated & hyp assigned the CMA
memory crashes, the crash handler is just freeing the memory
without calling hyp assign to get access back. This leads
to crash when freeing the memory as HLOS driver does not have
access to memory.
Fix this by calling hyp_assign to get access back to
HLOS driver.
Change-Id: Ic04736cf241eb7e310b8ce0af260e147f4d1edc6
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Signed-off-by: Akhil Karuturi <akarutur@codeaurora.org>
Compile for kalama chipset.
Replace wsa883x in kbuild/conf/mk files
Change-Id: I38910d7724e2b95ba79548f46dc152ccf63823ef
Signed-off-by: Matthew Rice <mrice@quicinc.com>
Driver implementation for WSA884X.
Use new script to generate register files.
Modify register naming convention.
Add wsa884x-reg-masks.h and wsa884x-reg-shifts.h
Reverting copyrights to 2019 for wsa884x.h file
Change-Id: Ic3652d6138a2f62ba59a36d4307c732ab6e8db89
Signed-off-by: Shazmaan Ali <shazmaan@codeaurora.org>
Display HDMI codec driver is not ready yet at this point.
It is not necessary for audio bringup on the kailua RUMI,
so the module is removed temporarily
Change-Id: Icca4e516b11d96252e928a4c9dda59f338e98cca
Signed-off-by: Junkai Cai <junkai@quicinc.com>
dma buffer virtuall mapping API has been updated in the kernel
update the ion driver to match the new interface
Change-Id: I3aab0609b91da7efcfb03dac99961ace498d79f3
Signed-off-by: Junkai Cai <junkai@quicinc.com>
Port drivers for Linux kernel 5.15(or after).
Remove unused headers that not present in the new kernel.
Update function interface matching API updates in the kernel.
Change-Id: Ibdffbe20c0b65b2ddda958d6a32c493696e15768
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
add kalama config file to all drivers' Kbuild, including soc/dsp/ipc
Change-Id: I56a6092da515f211a56617f0cff60079dbf0aa39
Signed-off-by: Junkai Cai <junkai@quicinc.com>
original logic will skip audio compiling even
TARGET_USES_QMAA_OVERRIDE_AUDIO flag is true when global QMAA is true.
update the logic to keep audio driver compiled if override is taking effect.
Change-Id: I21c3a9b48aea75f180eab4391d48976450944a69
Signed-off-by: Junkai Cai <junkai@quicinc.com>
In the function call get_mi2s_tdm_auxpcm_intf_index(...),
updated stream_name sanity check (if condition) to avoid
short-circuit scenarios causing FM Radio to be muted.
Change-Id: Ia3e500a49b4af2beda8af35d1f472662918d9c1b
Sometimes after SSR/DPR is triggered, RX_TX_CORE_CLK, WSA_TX_CORE_CLK
and WSA2_TX_CORE_CLK are not reset which causes WSA or WCD not
detected. Make this change to add reset during SSR.
Change-Id: I343f2f92244de3eee844e220a6201b389dc647b4
Signed-off-by: Meng Wang <mengw@codeaurora.org>
When ext clk stop wakeup and slave_pending_irq come together
then interrupt at swrslave is cleared due to calling
enable_slave_irq. Do not clear interrupts for enable_slave_irq
when its called from clk stop wakeup.
Change-Id: Ia710030ab80306d6750bea7264f0d4c07053d701
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Parsing the reg info from devicetree and pack
the reg values to enabl/disable EAR PA and
send to dsp.
Change-Id: I463750c00d592adcea77551259994a2dfb5e4cf9
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add support to use 4p8MHz DAC rate for receiver over WSA.
Change-Id: Ia0811670326be8131687fbdff70464da063902b2
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Send codec register's and its value to enable/disable EAR PA
when codec duty cycling is enabled.
Change-Id: I6ce7183bda3dd2d02829d280d27e5a5573e3efcc
signed-off-by: sarath varma ganapahiraju <ganavarm@codeaurora.org>
Add changes to use wsa883x for receiver with
low_noise mode settings.
Change-Id: Icfa43ebbdb1e366f365053535f541bee03751ca3
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
When SWR MIC is used, lpass-cdc doesn't know if it's amic
or dmic on WCD. Add new mixer control to indicate if
swr_dmic is used or not.
Change-Id: I2910053d1da9110edfe9b021df744f9d1662d158
Signed-off-by: Meng Wang <mengw@codeaurora.org>
