Currently the FW configures the mac with appropriate
offsets for rx pkt tlvs using the structure defined in
te FW and the host does not send the ring selction config
HTT message. This can create a problem when FW stops subscribing
to tlvs or changes its rx pkt tlvs offset.
Fix this by configuring the rx pkt tlv offsets via HTT
ring selection config message.
Change-Id: I1a2865f91b34dd7bda1af8651d7831097dac0bee
CRs-Fixed: 2860504
Change hal_hw_txrx_ops struct to designated initializer syntax for
structs for 6490.
Change-Id: Icd72cd5e20f1ba88920f4a2bc8e1bc714959e9b7
CRs-Fixed: 2837917
Due to recent FW changes not filtering out BAR frames, redirect these
frames to REO exception ring and handle as normal data packets.
Change-Id: I4540929fddab14de57a23f6364fc916a70057cbe
CRs-Fixed: 2795499
If frames from the same FISA flow goes into different REO2SW rings, it
will result in an unexpected FISA behavior. This can happen if the
frames have been reinjected from FW offload module since FW will select
REO2SW1 ring. If the same flow frames hash to other REO2SW rings, then
the same flow UDP frames will do to different rings.
Reo_destination_indication of 6 indicates if the frame has been
reinjected from FW. If so, then continue to deliver the packet without
FISA.
Change-Id: I14a17a10d04909adfb30557d58beb1610e59bf70
CRs-Fixed: 2790292
Make sure to drop the raw Rx frames as both driver and stack
are not expected to handle them.
Add counter for invalid fisa flow_idx packet received.
Change-Id: I5107c554b8ce6a9a7973f2aeca44bb0f360dc2df
CRs-Fixed: 2733981
Rxdma decrypt errors are observed when the association
is in progress as AP sends encrypted data packets to
DUT-STA. As part of the rxdma error handling, excessive
prints are logged to console resulting in an assert.
Fix is to rate limit rxdma decrypt error related log
Change-Id: I2ef28c635d77e3acafd067b921cdb13c277756c7
CRs-Fixed: 2725335
Due to changes in datapath init/deinit path, mon_lock spinlock was not
getting created. Create mon_lock spinlock during
dp_rx_pdev_mon_cmn_desc_pool_init.
Add null check to validate rx_tlv_header before calling
hal_rx_mpdu_start_tlv_tag_valid.
Change-Id: I41c781de29f2c8c05ec1bfa90f9c8f742f2539bf
CRs-Fixed: 2693687
Size of the TLVs have changed across generation of chipsets
Offset values need to be configured into DMA register for preheader DMA
Added APIs to get offsets of each TLV based on chip type
Change-Id: Ic011332cbf3a1017f324f246e47c9e2c91441c70
Support RX 2K jump/OOR frame handling from REO2TCL ring.
(a) configure REO error destination ring register to route 2K jump
/OOR frame to REO2TCL ring.
(b) for 2K jump RX frame, only accept ARP frame and drop others,
meanwhile, send delba action frame to remote peer once receive first
2K jump data.
(c) for OOR RX frame, accept ARP/EAPOL/DHCP/IPV6_DHCP frame, otherwise
drop it.
Change-Id: I7cb33279a8ba543686da4eba547e40f86813e057
CRs-Fixed: 2631949
Channel Frequency Response(CFR) feature requires PPDU information
for correlation with CFR data. Host subscribes for the relevant PPDU
status TLVs via the Host RX monitor status ring. During monitor status
ring reap, all information needed for CFR correlation is accumulated
in a HAL PPDU structure and delivered to WDI event subscribers. Add
this change for HSP.
Change-Id: If3060271cf2923171487d30f99f2ab5c55370601
CRs-Fixed: 2634766
In HSP platform, ring index 0 is for spectral scan, and ring idex 1 is
for CFR capture. Extend max rings to 2 and support CFR capture.
Change-Id: I02b39dd626b67172123bc5e77173d50a132fc735
CRs-Fixed: 2634636
Add HAL layer changes for full monitor mode.
Define HAL API and Data structures to read sw_monitor_ring
descriptor.
CRs-Fixed: 2630982
Change-Id: I015fa106d9da74222bef092d50e96fc70a117a4a
For qcn9000, As part HW enhancements, PPDU_ID is sent
in reo_entrance_ring descriptor instead of RX_MPDU_START
tlv. Add support to read ppdu id from descriptor.
Modify existing hal API hal_rx_hw_desc_get_ppduid_get ()
arguments to pass RxDMA ring HW descriptor.
Usage:
a. Use hal_rx_hw_desc_get_ppduid_get () -
to get ppdu id from rx_tlv_hdr or hw descriptor based on target.
for qcn9000, this API gets ppdu_id from HW descriptor,
for other platforms, gets ppdu_id from rx_tv_hdr
b. Use hal_rx_get_ppdu_id () - to get ppdu_id from rx_tlv_hdr
Change-Id: I5838227c12cde50cbb2a9da7a0d8056b8b9b7ef5
Move HAL_RX_MSDU_END_DA_IDX_GET macros to chip specific header file.
Fixing compilation failure for 6490 and 6750.
hal_rx_msdu_packet_metadata_get_generic need not be chip specific,
macros defining the function are already chip specific.
Change-Id: I940a289662bdeddfbf99fae2a80d7796334832e7
CRs-Fixed: 2595314
Rather than extracting msdu end pkt tlv information per field basis
during fast data path, extract msdu end pkt tlv information at once
and store in local structure.
Change-Id: I0877ba4f824d480cc0851c72090f010852d0d203
fix the issue for block ack/ack for tx capture mode.
1. Hanndle BAR frame.
2. set rate for ACK frame.
3. Check block ack session and use block ack if block
ack session is established.
4. no ACK for broadcast probe request.
5. not ack if the ack policy is set to no ack in qos control.
Change-Id: I4f22c1c976334978fb971b42319fb3a6e43a00c2
the current HAL API is to read the WBM internal error
bit from the wbm release ring descriptor is always taking
HKv1 HW structure. But the wbm_internal_error bit
placement has changed from HKv2, for this reason we have
to use target specific HAL API.
Change-Id: I44789180754ca21ae59650b6d8620321a1f12569
Channel Frequency Response(CFR) feature requires PPDU information
for correlation with CFR data. Host subscribes for the relevant PPDU
status TLVs via the Host RX monitor status ring. During monitor status
ring reap, all information needed for CFR correlation is accumulated
in a HAL PPDU structure and delivered to WDI event subscribers.
Change-Id: I3662b60375cb8886447a2fba3efead6a1ef3a98d
CRs-Fixed: 2593408
sw_frame_group_id decides process for frame. USER_STATS tlv case uses
sw_frame_group_id to add qos_null frame control to rx_status.
Change-Id: Ia3da8dbe4fc4c2d0f21fa8864e6b4e87170ba8f6
Write into hal register using three floating windows instead of one.
This change is done to avoid frequent window changes for writing into
DP and CE registers. Instead 3 windows are used. One window is statically
mapped to CE block and another window is mapped statically to DP block.
Due to this design there is no need to change the window register to
write into these blocks and write can be done on corresponding window
with single iowrite32. Similar loginc is used for ioread32.
Also modified the hp_addr and tp_addr in initialisation stage so that
hal_write will not have multiple if checks.
Change-Id: Ibb99ec4da7f63323082e46a28afbe90e1f555545
CRs-fixed: 2507441
Add hal_rx_get_rx_sequence API to retrieve
rx sequence value based on the chipset.
Change-Id: I8377b96dfe04e9695a183482d9fcc4a804f845e0
CRs-Fixed: 2522133
Add the following support for QCA6490:
1. Initialize the qca6490_hal_hw_txrx_ops
2. Initialize the hw_srng_table
3. Attach hal_qca6490_attach
Change-Id: Ic53c520ef804eb4fbe1434c704e9040c83011d3d
CRs-Fixed: 2522133
Implement hal_rx_tlv_get_tcp_chksum API
to retrieve tcp_udp_checksum value
based on the chipset.
Change-Id: Ifab970f10af06f8c0cdbd14d57cb66b49bae1648
CRs-Fixed: 2522133
Implement hal_rx_msdu_get_flow_params API
per chipset as the macro
to retrieve the flow parameters is
chipset dependent.
Change-Id: I6ef83232ebdf7497871a7fc588e082d14cdc9e75
CRs-Fixed: 2522133
Implement hal_rx_msdu_cce_metadata API per
chipset as the macro to retrieve the cce_metadata
value is chipset dependent.
Change-Id: Icd87d4ac32be78d69b24da106381a7669c86ada6
CRs-Fixed: 2522133
Implement hal_rx_msdu_fse_metadata API per
chipset as the macro to retrieve the fse_metadata
value is chipset dependent.
Change-Id: Iae7f532460b5203af2f95c504a6941c0b18b665e
CRs-Fixed: 2522133
Implement hal_rx_msdu_flow_idx_timeout API
per chipset as the macro
to retrieve the flow_idx_timeout value is
chipset dependent.
Change-Id: I03030e3763b3c4a9099699a2d24b8110961610cf
CRs-Fixed: 2522133
Implement hal_rx_msdu_flow_idx_invalid API
per chipset as the macro
to retrieve the flow_idx_invalid value is
chipset dependent.
Change-Id: I5b8622eb896456b7388016a16657048d0da4e970
CRs-Fixed: 2522133
Implement hal_rx_msdu_flow_idx_get API
per chipset as the macro
to retrieve the flow_idx value is
chipset dependent.
Change-Id: I75131d7c048f5b67489ed25fbd52bfcf01bab782
CRs-Fixed: 2522133
Add the following macros:
1. HAL_REO_CONFIG
2. HAL_RX_MSDU_DESC_INFO_GET
3. HAL_RX_LINK_DESC_MSDU0_PTR
Add the relevant function pointers to
retrieve the descriptor info from the
above mentioned macros based on a
given chipset.
Change-Id: If44ae3d91397f1b1b0c36a49ce56a2c5e719434e
CRs-Fixed: 2522133
Add the following macros:
1. HAL_RX_GET_FC_VALID
2. HAL_RX_GET_TO_DS_FLAG
3. HAL_RX_GET_MAC_ADDR2_VALID
4. HAL_RX_GET_FILTER_CATEGORY
5. HAL_RX_GET_PPDU_ID
Also add function pointers to
retrieve the flags from the above
macros.
Change-Id: I334b198588ceba77cd30bdde7ebc500cdbe18358
CRs-Fixed: 2522133
Add the following HAL macros:
1. HAL_RX_MSDU0_BUFFER_ADDR_LSB
2. HAL_RX_MSDU_DESC_INFO_PTR_GET
3. HAL_ENT_MPDU_DESC_INFO
4. HAL_DST_MPDU_DESC_INFO
Add relevant function pointers to retrieve
descriptor info from the macros based
on chipsets.
Change-Id: I99ce7566a668180c7849eedea915b6f23a8dbf35
CRs-Fixed: 2522133
Implement hal_tx_desc_set_mesh_en API
based on the chipset as
the macro to set mesh_en value is
chipset dependent.
Change-Id: I43c85e4ed6fd4f9992de5b71857cdb8becd1dd36
CRs-Fixed: 2522133
Implement hal_rx_msdu_end_sa_sw_peer_id API
based on the chipset as
the macro to retrieve sa_sw_peer_id value is
chipset dependent.
Change-Id: I2efd1f851539bbffc8f75c7662045c1f4a3c4469
CRs-Fixed: 2522133
Implement hal_rx_mpdu_start_mpdu_qos_control_valid
API based on the chipset as
the macro to retrieve mpdu_qos_control value is
chipset dependent.
Change-Id: I61449ff5afc958f1a1f93013b0c5ab56d38cc833
CRs-Fixed: 2522133
Implement hal_reo_status_get_header_generic
based on the chipset as the macro to retrieve
reo_status value is chipset dependent.
Change-Id: I43bd624bec37fb051f33b4828fcf7cd3e4b2a61e
CRs-Fixed: 2522133
Implement hal_rx_hw_desc_get_ppduid API based
on the chipset as the macro to retrieve
ppduid value is chipset dependent.
Change-Id: I7d3457d731ea486f04367f98f9f18d3f1c0fcfd7
CRs-Fixed: 2522133
Implement hal_rx_tid_get API based on
the chipset as the macro to retrieve
tid value is chipset dependent.
Change-Id: I37eab3f3c1c2bbba6094b9ddb24d72712b819f73
CRs-Fixed: 2522133
Implement hal_rx_is_unicase API based
on the chipset as the macro to retrieve
is_unicast bit value is chipset dependent.
Change-Id: I38807f478c295309adf2a07ce9010b1bc04c734e
CRs-Fixed: 2522133
Implement hal_rx_get_mpdu_sequence_control_valid
API based on the chipset as
the macro to retrieve sequence control valid
value is chipset dependent.
Change-Id: I01a006094d0330060e9ff1a91200c48c2426f38d
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr4 API based
on the chipset as the macro to retrieve
addr4 value is chipset dependent.
Change-Id: Ie35d01de1619a8ab540bb1b2019a15b436efb7d4
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr3 API
based on the chipset as
the macro to retrieve addr3 value is
chipset dependent.
Change-Id: I3983599b656e82170de5905c08daee3ec164e7a0
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr2 API
based on the chipset as
the macro to retrieve addr2 value is
chipset dependent.
Change-Id: I4026db892d4f2f41db72c50f780ba898b8a17fa7
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr1 API
based on the chipset as the macro to
retrieve addr1 value is
chipset dependent.
Change-Id: I7ed88f2243d397c9d605a08d3b93e17f0004c63d
CRs-Fixed: 2522133
