The DMA buffers used by the display module are cached buffers. While
mapping to the CPU, pgprot_writecombine should only be used for uncached
buffers. The change fixes this mismatch during virtual address mapping.
Change-Id: I2f54375b4eb4071d9bbcae44449bb6c99feb24a6
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change uses kvzalloc to allocate memory for lutdma buffers.
This is needed since kernel cannot guarantee that physically
contiguous allocations greater than 32 KB will succeed.
Change-Id: I91c12bbd612408692ba8e4a3cd9ac1ce308eda64
Signed-off-by: Anjaneya Prasad Musunuri <aprasad@codeaurora.org>
Change adds a check to return a warning rather than an error during a
debugfs read command transfer while the device is suspended.
Change-Id: If65ba642f73f4c8e6b9609bbed6e376ef7836145
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
In ESD register read validation, a for loop is used to increment a
local variable with the length of ESD command. But this is unused
in the validation of the read data. This change removes the unused
for loop.
Change-Id: I6d1a9233061ee33a2b5390e2f922a2412af7d605
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
The CASET and PASET commands can be batched together and sent using the
MIPI_DSI_MSG_BATCH_COMMAND flag. This was during pre kickoff there is
no unnecessary wait between the ROI commands.
Change-Id: I96ce30367f66024dc56f67bc1f113cac36353a9b
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Add support to use atomic variable instead of spinlock
for register logs during register write. This change
helps in reducing the run-time and is safe to use as
most of the register writes happen in commit context.
Change-Id: Ib7e377f80cbf437e391792b0b424cbd1eefdf497
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add changes to check for error status in dma_fence on task wakeup
and when error is set white frame gets staged to handle such input
fence failures.
Change-Id: I8f3c9f746334c6d03a272ab4e33f51afb84057ea
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Topology in sde_encoder is no longer used, so remove this
variable from sde_encoder.
Change-Id: Iba02ae690d81d39252d0df83882a72e35f2916ec
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Replace the DSI_DEBUG logs with pr_debug logs for backlight related
color processing features. DSI_DEBUG logs cannot be enabled dynamically
by the /sys/kernel/debug/dynamic_debug/control sysfs node, hence move to
pr_debug instead.
Change-Id: I6a6e2fcd81cacef9e5ec7c061fae8f4cf2b7106d
Signed-off-by: Ping Li <pingli@codeaurora.org>
Clock lane can enter ino ULPS mode only in DPHY mode. For
CPHY, did not need to check the clock lane status for ULPS.
Change-Id: Iceddd8064ec75ce26613469cfb1bde36e883f865
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Change fixes issue where HDCP 2p2 authentication process
was broken for repeater usecases.
Change-Id: Iae7fc6a2cabd5e5a592d7e234f11d748539124e5
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Creating a generic api that can be used with the driver
for read poll timeouts. This allows for easy overriding
of the function, if necessary.
Change-Id: I7bc5176ebabe782089b1a4d6e94c17ad3eb9ada4
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Signed-off-by: Michael Ru <mru@codeaurora.org>
Cleanup DSI HW register access layer to minimize the number of macros that
access readl/writel functions.
Change-Id: Id78025b3837f9126f64681b4c1c1e13aec762081
Signed-off-by: Michael Ru <mru@codeaurora.org>
This change removes exposing Demura CWB tap point capability
to userspace.
Change-Id: I7be24a2004ce489fca76593cdb9f75e8b52d4461
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Removes files and version checks for unsupported DSI PHY versions.
Change-Id: I47223a3860e3bcf48eb3b74e405064d8eb375f16
Signed-off-by: Michael Ru <mru@codeaurora.org>
Removes files and version checks for unsupported DSI Controller
HW versions.
Change-Id: Ic0acd34959ddfcf2db79102857e15f4e06da1d3a
Signed-off-by: Michael Ru <mru@codeaurora.org>
Fix dsi count calculation which is used in determining size of
the memory allocated for dsi debug bus dump of all dsi controllers.
Change-Id: I22462eff41ebafde787a6cf4c1751104846bc6a5
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Instead of hard coding the size of the blob data, pass the exact
size retrieved from drm property framework to color processing layer.
Color processing layer has size check to make sure the blob data size
matches the expected size.
Change-Id: I277f9be1ba84e4e4707847756a9ed0ea1ed23f53
Signed-off-by: Ping Li <pingli@codeaurora.org>
The connector detect function is currently implemented as a
callback from the framework, and creates a context before
calling the detect_port_ctx MST callback. This change updates
the callflow so that the framework calls the new detect_ctx
function in the MST case. This removes the need for creating a
new context before calling further downstream functions.
In addition, references to the mst_connector_get_info
function were replaced by connector_get_info to avoid
redundancy.
Change-Id: I224d09e77fad4b6925a42b1bc912a05e3e4d060a
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
This change allows signalling of sde fences when sequence number is
less than done_count. In current scenario, fence is not signaled as
the subtraction result is not typecasted to int before updating
the status causing the UI thread to block on sde fence.
Change-Id: I3ca62222e0c67223b9eaf299474a2c282d761d3a
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
During mode enable after idle, rsvp next would be be set without
rsvp cur. Back to back test only should be serialized, but currently
this would be possible right after idle. This is established by
commit 11aab5f9c3 (disp: msm: sde: Fix null dereference errors).
This change updates the condition to poll for rsvp next clear
during this usecase as well.
Change-Id: I300254967cbec69fff8b31545b8d659afc56f283
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Fix out of bounds access that occurs when reading dsi
commands with custom non 4 bytes aligned payload.
When misaligned, the code is overfetching data due
to 32 bits reading constraint. This creates an offset
in receiving buffer. Using a local copy buffer large
enough to hold the extra bytes fixes the issue.
Change-Id: Ia0ee791d2e87639edd58191cfd5cb6f8f825f8c8
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Move esd check to write pointer wait instead of during
write pointer timeout. With this change display will avoid
improperly signaling a retire fence and allowing two flushes
to happen within a single vsync in cases where ESD failure
is happening.
Change-Id: I6fbd76a2f6b47d3237039f66a3b1edd1f72a0a1d
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
There is a new clock lane that is used for the sublink when
split link is enabled. The following change adds programming
to control the sublink clock lane.
Change-Id: I1af370cd39e02130569815766fb748ae6bad72d0
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
Use the upstream function dma_fence_signal_timestamp_locked to signal
the sde fences with timestamp parameter instead of the downstream version.
Change-Id: I9e0dcc3bafa16e78fe80268f560bf003ac1a2bc1
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Video requires width of linear RGBA8888 format byte-aligned to 256.
Change-Id: I7fa3822abb2912ef78e192756d19a5f8468bd493
Signed-off-by: Ravi Ranjan <rravi@codeaurora.org>
