add support for GND MIC SWAP config for pineapple CDP.
Change-Id: Ia6ecbe2818ac12c7fad5738a78bbdcd4d1611e15
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
For test program < 3, use local default trim values
for harmonium 2.0 version.
Change-Id: I8cdcbe83ddae4626cef1f3dc4bfab3b2c285a0ca
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Update wcd939x register settings for 2.15V VDD_RX supply
and for 2Vpk and 1.4Vpk modes depending on the headphone
load impedance values.
Change-Id: Iae5e6087fe96d22c9b9f8b755c468d2e6dface4e
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Check drive strength for boundary conditions and limit them
to valid values.
Change-Id: I6a474f5d6020bb46b1f6171e77aeaeb5254b2a26
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Display team will refactor their Bazel build system,
changing the path to their msm_ext_display module.
The hdmi_dlkm module depends on this driver,
so update the path in accordance with display's change.
Change-Id: I2874cc6ffb8fcec27155adbd84c482c9d1ba23e5
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
In lpass_cdc_wsa_macro_config_compander function,
add check for wsa_sys_gain array's index to make sure
it won't go out of bound.
Change-Id: I9d8512726de959e7a0d9e875e966140d70412e25
Signed-off-by: Deepali Jindal <quic_deepjind@quicinc.com>
add mutex for vote_against_sleep_cnt to avoid race conditions
while updating the cnt value at the time of SSR. Add check
while decrementing the cnt.
Change-Id: Ic8e40fa6b4a68c05fb70369ecb764943d5f582fa
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
To implement dummy device based a2dpSuspend/resume, adds support
for dummy device backend in audio kernel.
Change-Id: Iad4a210167ce400232c6d3b84bfca8b84fa358c8
Signed-off-by: Anand Mohan <quic_anamoh@quicinc.com>
Added new wsa2_init api to initialize slaves connected over
wsa2 macro. which will allow us to control them only when
wsa2 backend's are used.
Till now we are enabling all wsa slaves during wsa_init.
which causes concurrency issue, when we use them dedicatedly
for specific usecases, if one slave is disabled,the other
slaves are also getting disabled.
Change-Id: I1ec8c4700a977ad6001c879ad0343a45a1642105
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Program WSA_DATA_FS_CTL reg based on input used(wsa rx/wsa2 rx)
and also update the channelmap based on mixer cntl.
Change-Id: I0cfac1d9b25dd1211824bcea2753bb6c1131f767
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Mix path clk is gated by main path clk, as per current logic we are not
enabling main path clk for mix path use-cases.
Enable main path clk before enabling mix path for UPD dedicated backend
to work.
Change-Id: I209d1eaf25f4ef08bbd534f5ecc858e465ce7e18
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
Currently on pineapple CDP platform, sbu1/2 switches are always
pre-connected to gnd/mic of the jack. Avoid this static connection
and connect/disconnect only when headset insertion/removal is detected.
Change-Id: If3bef6834caeb539492304d8b16808cd09c5afab
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Add logic to Android.mk that will allow kernel
platform to invoke Bazel instead of Make.
Change-Id: Ib96e82fb1f2bff35b6b433614b715b3e90d07436
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Updated WCD937x, WSA881x-analog and bolero drivers for successful
compilation on kernel6.0 for holi.
Change-Id: Ia91a999f825570b3d7123842f0aad3740c4d25ed
Call spf_apm_close_all and msm_ion_crasH_handler from audio-pkt driver
only to avoid calling for these APIs twice.
Change-Id: I69f8f9cbafd5b08a24b45c8229d22a639eb35b8b
Signed-off-by: Ritu Sharma <quic_ritushar@quicinc.com>
Enable Audio HM vote for VA I2S and TDM interface so that
clock is sourced from CXO instead of RO.
Change-Id: I4f74f46a4ae7977e9cd15a2d8f59f020e02ac8a1
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Enable Bazel for building audio-kernel modules.
Change-Id: I3b6a4e2d4034f1f39699b8a6dc21087c87fbe09d
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Codec dai name for btfm proxy is changed to not use
slim keyword. Update dai name as updated in codec driver.
Change-Id: I1c8a815959a448f476aefa3b892311c279db00cd
Signed-off-by: Rohit kumar <quic_rohkumar@quicinc.com>
In PDR cases INTR_CLEAR registers values are not updating
properly while doing reg_cache in recover from PDR. So add
these registers as volatile to get the exact HW values.
When these registe values are properly updated the FSM_PA
status is reseting properly and working.
Change-Id: I8fa7b01b3256ec8f01edc3fe48a519accfff9638
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
In SSR/PDR usb switch settings won't be reset in wcd939x-i2c
driver. So no need to do switch settings for AATC when recovering
from SSR/PDR. Depends on the status to avoid AATC switch settings
again after SSR/PDR.
Change-Id: If7fc2a84356a406e9cf7e6cc557e19584fda3969
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Add static variable to store version to avoid improper
device pointer in wcd939x_readable_register().
Update WCD939X_NUM_REGISTERS macro to be correct size.
Change-Id: Ib594f2f799ac2202ff78c02ccf2f6cdb80ffd38e
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Few register default values are incorrectly set for harmonium
codec in the register map table. Fix it by setting correct
values as per the hardware interface documentation.
Change-Id: Ibcb517d6050a4932243ead396e6f89294aab4a23
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
During spk playback and VA concurrency,
sometimes WSA CLK goes out of sync causing
VI_TX data mute. To resolve this, everytime
after WSA MCLK enable toggle fs_cnt_clr bit.
Change-Id: Ia936f1d4843890d2ae5c02b039f502941a5427b9
Signed-off-by: Soumya Managoli <quic_c_smanag@quicinc.com>
