Since MLD peer hash is the same for MPSTA and PSTA in QWRAP repeater,
skip this check for all WIN platforms.
Change-Id: I30fe7d8a6d1d24af841bcd21015e93f7bec6b2c8
CRs-Fixed: 3382276
Handler dp peer setup for non MLO case in BE specific
handler. This API currently deals with direct switch feature.
Change-Id: I6e26687e5e7e92108dfa0da782970f758fd1965e
CRs-Fixed: 3381234
Add debug logs in the MLD peer create/delete path
to help debug any issues with MLD peer leak.
Change-Id: I63126d9b86f3179a88809836371fc765d340b6d8
CRs-Fixed: 3379148
Enable intra bss fwd offload on vdev by default
by sending wmi command to firmware.
Change-Id: I5fcc828f8360c93a7adbcf8f1f2cb7cc58593a49
CRs-Fixed: 3362569
from Beryllium onwards a single Flow Search Table
will be used across multiple radios. to ensure this
a single FST attach is called for the first SOC's
pdev and FST detach is called only during last pdev
of last SOC. the same FST instance is saved in all
pdevs of all the SOCs
CRs-Fixed: 3366409
Change-Id: I42fbdc6f09fb902021877e100a2831a1a24bc975
waikiki supports sending a packet from REO2PPE if a flow
rule matches. these changes are added to take advantage of
this HW feature when ever we are adding a flow rule
CRs-Fixed: 3359141
Change-Id: I8fedfcc759bc0427d71d3bb615e61ba38577c5c0
As per current design, dp_mlo_ctxt is allocated during the
initialization of module while the MLO grouping information is
understood after WMI_READY_EVENT. The same is deinitialized while
unregistering the module.
To ensure dp_mlo_ctxt exists per MLO group, bring the dp_handle
a layer below in the hierarchy into the mlo_setup_info and allocate
dp_mlo_ctxt after the WMI_READY_EVENT is received from all the SOCs
for a given group. Deallocate it after the WMI_MLO_TEARDOWN_COMPLETE
event is received.
CRs-Fixed: 3355405
Change-Id: Ic3102a34a8d44877827e2ff1f7da2e414b2b463f
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
Program service code bypass to avoid
L2 new mac address learning exception
when fdb learning is disabled
Change-Id: I588a885aac1755cdf2ded5176b25d5ae9f533091
CRs-Fixed: 3354407
Requirement:
As part of serviceability for DS, display the number
of Tx descriptors currently in use by DS module
via “cfg80211tool athXX txrx_stats 260” like non-DS.
Snippet of log/code of Non-DS:
DP_PRINT_STATS("Tx Descriptors In Use = %u",
soc->stats.tx.desc_in_use);
Fix:
Introduced a new ops (dp_tx_ppe_ds_inuse_desc)
to display the current Tx desc in use.
dp_ppe_ds_inuse_desc API will be registered
to dp_tx_ppe_ds_inuse_desc in initialization
and it will be invoked from dp_print_soc_tx_stats API
to display the in_use desc via 260 command
Change-Id: I18971fc5d4cb5eb5437b012e3b89db7c9c2446b4
CRs-Fixed: 3352686
1.Add check in Tx completion path to handle
mcast packets from all ML partner vdevs
2.Handle cases where a ML mcast vdev can be
deleted and started as NON-ML vdev and
viceversa by adding reset ML mcast conf.
3.Optimized Register configurations for Mcast
at Init/Delete and Start/Stop AP
Change-Id: Iab8a5a081e2e0377509574d362754d32c5b83df2
CRs-Fixed: 3350350
Handle mlo case for ppe ds peer setup by
making sure the src_info is always extracted from
primary vdev.
Change-Id: Ie4b0d8f475966e8c4264cea5cf32f0dc95e76c4a
CRs-Fixed: 3346074
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
Add support for GET MLO Multicast API to check
if the vdev is primary multicast vdev.
Enhanced SET MLO Multicast API to reset primary
multicast flag for all partner vdevs.
Change-Id: Ic88949ce922bb1d0fd34349058d254de0d1f563c
CRs-Fixed: 3322523
Retain ds ring indices across wifi restart to avoid
edma hang. Fetch the indices from ds module and set
the corresponding ds ring indices.
Change-Id: Ia299a7006166aef096c7d2c1f65f6bef65415a37
CRs-Fixed: 3332152
Ideally in MLO, Rx buffers should be routed to error
rings of the SOC which owns the RX buffer or link desc
incase of any error or fragment
But in case of HW issue if the packets are routed to
partner soc. Handle gracefully instead of assert
Change-Id: Ia56188808dfd034e960e1c1345de8f760e4b05f1
CRs-Fixed: 3327959
In 256M profile dp_li_rx.c file is not getting compiled.
Initialize dp_rx_chain_msdus_li() only when HOST mode is supported.
Change-Id: I96f71b9ea7869f0ba9fec05424b0a8c6f378f2f4
CRs-Fixed: 3314081
When compact rx tlv feature is enabled fetch the
reo qdesc from the peer instead of rx pkt tlvs.
Change-Id: Idc9eec559b71ebb2dc39ea1d648a384ea0eb9559
CRs-Fixed: 3311270
Adding compact tlv support for QCN9224, As part of this change
Rx tlv size will reduce from 384 bytes to 128 bytes.
Change-Id: I3f42a781e42b2e696a5b25d9c5f333c8cc83b7fe
CRs-Fixed: 3274152
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
The packet start offset configuration is common
for both mission mode and monitor mode. Hence if
the packet_header tlv is not subscribed for the
regular mission mode, the packet start offset for
monitor mode also gets affected, where packet_header
is subscribed.
This causes a loss of 128 bytes in the packets
captured in monitor mode.
Fix this issue, by setting the packet start offset
based on the driver operation mode.
Change-Id: I0a0e431278bef519534c2b1be87797d9b047525c
CRs-Fixed: 3292130
bank id is newly added in TX descriptor for BE chipsets. As such,
with IPA Offload enabled, IPA needs the bank id information to do
offload WLAN TX.
From WLAN perspective, bank id is designed to be used on a per-vdev
role basis. E.g. STA vdev and SAP vdev have separate and different
bank profiles.
However from IPA perspective, bank id needs to be on a per TX ring
basis, because IPA GSI FW is not able to identify STA or SAP vdev
role on a per-packet basis.
Hence initialize last HOST owned bank id profile for IPA usage.
Change-Id: I0cf71b638f5999905069aff0551d8ebeb5477e17
CRs-Fixed: 3289558
Compilation is failing when Monitor support is disabled
Moved monitor related API and structure to monitor header files.
CRs-Fixed: 3257872
Change-Id: Ie1b3dc16b38c88bfd73fc89aaa395d4b57a61e5c
Add framework to use different RX hash values and ring masks
for ML and non-ML peers
Change-Id: I098cb50b8873eb137ce096011d01a5c21aaf854f
CRs-Fixed: 3269916
Maping and unmaping of the MLO DP peer to the partner soc
will be initialized based on architecture.
dp_mlo_partner_chips_map
dp_mlo_partner_chips_unmap
Change-Id: I918f6d552acd9d64086abf4c38f913348e13c381
CRs-Fixed: 3267904
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Add support to print AST entries of MLO peer.
MLO AST table is global across SOC and hence any print AST request
will print the MLO AST table
Change-Id: I07554606617f43a8806e1c7243ca69a0c8ce335e
CRs-Fixed: 3246520
Add change to support learning of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: I58aa6a18ca69d5ffc6fbcf9c18723adb39647950
CRs-Fixed: 3237934
With KIWI_V2, wbm_ring_num for WBM2SW5 and WBM2SW6 have been changed
to 5 and 6. Hence properly update them in g_tcl_wbm_map_array. At the
same time, tx_ring_mask_msi and tx_ring_near_full_irq_mask are also
updated.
With IPA_OFFLOAD enabled soc->tcl_data_ring[0|1|2] is used by HOST
and the other two rings are allocated to IPA usage.
Change-Id: I4c13d0787e46be667c3a5a0ae624df8c2b2b354e
CRs-Fixed: 3229375
- Add support to compute HW Tx completion delay on WKK
- Define arch op to calculate delay
Change-Id: I82567cc781e90fe01dc5a0edfffacd4cde73f652
CRs-Fixed: 3220911
Add delta_tqm, delta_tsf2 and mlo timestamp offset for BE.
These offsets are used to calculate hardware Tx completion delay.
delta_tsf2 and delta_tqm are updated during init. mlo timestamp
offset is updated whenever target sends the update event.
Also, adding CDP ops to set the offsets.
Change-Id: I55665982798c3a795481fa96c023bb851ea17476
CRs-Fixed: 3220906
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
In case Multi chip MLO configure same hash key for
all SOCs in MLO. This change is needed to avoid
same flow traffic distributed to multiple REOs.
Change-Id: Ib6cde4ae32e58ef2d45c02d640c133458f5bfac5
CRs-Fixed: 3201978
