Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447363
Add 165MHz support to wmi_host_channel_width to keep in accordance
with the wmi_channel_width structure in wmi_unified.h
Change-Id: Ib8aea0bc725a1c43b8fb7510cf86da4633143f69
CRs-Fixed: 2463171
Clean up of CONFIG_MCL and optimise memory of peer_assoc_param
structure by use of bit fields instead of bool type
Change-Id: I4b06af69b7fd9af981a250c881d163ddb1f68fa7
CRs-Fixed: 2450763
Add WMI commands:
1) WMI_PDEV_PARAM_SET_MGMT_TTL
Enable/Disable/Set MGMT_TTL in milliseconds.
2) WMI_PDEV_PARAM_SET_PROBE_RESP_TTL
Enable/Disable/Set PROBE_RESP_TTL in milliseconds.
3) WMI_PDEV_PARAM_SET_MU_PPDU_DURATION
Set global MU PPDU duration for DL (usec units)
4) WMI_PDEV_PARAM_SET_TBTT_CTRL.
Set TBTT CTRL value BITS 0 - 2
(refer to WMI_TBTT_CTRL_CFG enum)
Change-Id: Iedda500fdb7bdedcc11fef31f0b29ad3f1812a43
CRs-Fixed: 2415745
Add interface API to send reject ap list to FW,
also add the blacklist manager UMAC, and QDF component
for the same.
Change-Id: I826e537683441762043003d71dc2b79ceebebbcb
CRs-Fixed: 2460770
Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. User
space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425197
Change-Id: I3857d2a605baa2673af333a7a0412f1690b59769
Convert host param id to target param id using arrays
instead of switch case. This enables removal of CONFIG_MCL
compile time macro and use specific macro
ENABLE_HOST_TO_TARGET_CONVERSION for conversions
Change-Id: I223141d47e92521e6600fc0e160ab2deef43d7d2
CRs-Fixed: 2418030
Currently, If invalid pdev_id is passed to
convert_target_pdev_id_to_host_pdev_id it results into Assert.
Fix is to remove QDF_ASSERT(0) in convert_target_pdev_id_to_host_pdev_id.
Return WMI_HOST_PDEV_ID_INVALID if convert_target_pdev_id_to_host_pdev_id
receives invalid pdev id.
Change-Id: Icb6a75c3f3664596fbba4532f5b29ed626ba28f2
CRs-Fixed: 2428787
The target advertises adaptive 11r service capability over
WMI_SERVICE_ADAPTIVE_11R_ROAM. Enable RSO for adaptive 11r
connection only if firmware advertises this service capability.
Change-Id: Iea78b63d19d1177fe092fc9916ddc5280d00de4b
CRs-Fixed: 2441975
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
Host driver sends pmk key over psk_msk buffer on the
wmi_roam_11r_offload_tlv_param fixed param.
For SHA 384 based FT AKMs, the xx_key length will be higher than
32 bytes. So new psk_msk_ext array is introduced at interface
to sent the remaining 16 bytes.
Fill the last 16 bytes of xx_key to psk_msk_ext for FT
sha384 based AKMs.
Also add support for FT-SAE, FT-SuiteB and FT-FILS firmware
service capability also. If the firmware doesn't advertise
support for FT-SAE or FT-SuiteB or FT-FILS, firmware roaming to
that AP will not be enabled.
Change-Id: Ibe64fb346a24962e59ca461c3099270d8766adc5
CRs-Fixed: 2400773
Add command support for NAV register update and
configuration of the threshold value.
Change-Id: Idbdb030f75dc98db652e6b53604a3ceaaff1106b
CRs-fixed: 2389803
The below ini values are added to enhance roaming in firmware:
1. "minimum_btm_candidate_score"
2. "roam_scan_inactivity_time"
3. "roam_inactive_data_packet_count"
4. "roam_scan_period_after_inactivity"
5. "btm_roam_score_delta"
6. "idle_roam_score_delta"
7. "btm_roam_trigger_min_rssi"
8. "idle_roam_trigger_min_rssi"
The values of "roam_scan_inactivity_time" ,
"roam_inactive_data_packet_count" and
"roam_scan_period_after_inactivity" will be sent over the
WMI_ROAM_SCAN_PERIOD wmi command.
"minimum_btm_candidate_score" value will be sent in the
WMI_ROAM_BTM_CONFIG_CMDID command.
The values of "btm_roam_score_delta", "idle_roam_score_delta"
"btm_roam_trigger_min_rssi" and "idle_roam_trigger_min_rssi"
will be sent over the WMI_AP_PROFILE command in new tlv.
Add WMI support to send the introduced ini values to
firmware.
Change-Id: I117ed7490d14730423654513f416115822230486
CRs-Fixed: 2435676
Add wmi service bit: wmi_service_sta_plus_sta_support.
When this wmi service bit is set, firmware shall support simultaneous
connections on multiple STA interfaces.
If firmware doesn't set this service bit and if the host driver
doesn't check this bit before second STA connection, then firmware
shall reject connection by returning failure in VDEV_START_RESP_EVENTID.
Change-Id: I9e20911af5372b651586f25d9f13e4364c672435
CRs-Fixed: 2427202
Many of the fields in struct add_ts_param use camelCase which is
frowned upon by the Linux coding standard, so rename them to be
compliant.
Note that change I829ad0abb864f0a05047894bab9977d8529074dc
("qcacld-3.0: Align with the refined struct add_ts_param") is
interdependent with this change.
Change-Id: I421b670b86a7e1cecbe5a2686efefbbb6c455267
CRs-Fixed: 2433927
Add change to support sending AMPDU/AMSDU custom aggregation
size to FW using converged MLME and target_if framework.
Change-Id: Icf665e3bf30c5ef5903342264e89776611c7774a
CRs-Fixed: 2430278
Currently capability information and RX multicast broadcast
packet count of the connected peer is not getting
cached.
Add support to cache the capability info from assoc request and
RX multicast broadcast packets from FW.
Change-Id: I105e055b1e440852e8e6b508c25e45f79db2d062
CRs-Fixed: 2409521
Fix the typo for PROFILE_IDX and also add WMI macros
for short slot time update under MLME.
Change-Id: I3c09a7f01029af0f075086166be1c85bd1d7de34
CRs-Fixed: 2412160
If both INI and FW capability is set,
enable capability flag in twt enable command.
Change-Id: I1c070256c4b672b09a1323665fc5a2f166f951fb
CRs-Fixed: 2423718
Modify the comment to avoid the use of restricted words in the
wmi_unified_param and service_ready_param
Change-Id: I50f474bdeed6cfdfd05f0c4bff5bb0c0ed56127f
CRs-fixed: 2427333
'hecap_info_internal' has been added to indicate support for 11ax
proprietary PHY features: 400ns SGI support in 1X/2X LTF and 2X LTF
support in 160/80+80MHz modes. Added the corresponding peer assoc
and service ready parameter.
Change-Id: I34ead9278d8d84ecbc5525867f1584f8c8a4d7b8
CRs-fixed: 2414163
Add support to get the various Coex data from the debugfs.
This commit adds the support to get the various coex data:
* COEX STATE
* COEX DPWB STATE
* COEX TDM STATE
* COEX IDRX STATE
* COEX ANTENNA SHARING STATE
The specific state information can be read via the debugfs.
Example to read the COEX STATE logging:
sm6150:/ # echo "1" > /d/wlan/mws_coex_status_info
sm6150:/ # cat /d/wlan/mws_coex_status_info
Reading for command MWS_COEX_STATE.
vdev_id = 0
coex_scheme_bitmap = 0
active_conflict_count = 0
potential_conflict_count = 0
chavd_group0_bitmap = 0
chavd_group1_bitmap = 0
chavd_group2_bitmap = 0
chavd_group3_bitmap = 0
Change-Id: I92272ad7edf44df22730ac0fa992d876840ba632
CRs-Fixed: 2413955
Add the necessary support for peer_extd2 stats in the WMI layer. The
stats contain rx_bytes, rx_err and rx_mpdus
Change-Id: I9f787e28a8e128471489c8f47ac03fef77dae930
CRs-Fixed: 2395636
Add Diag log support for logging cold boot calibration
data sent by firmware via cold boot cal wmi event.
Change-Id: I932fd5f87667498b77ee13ca5b3ce08d6001cdf0
CRs-Fixed: 2413451
Add modules and API's to issue command WMI_NDP_CMDID. This
command, for now, can request Firmware to terminate all NDP's
associated with the given vdev. Add module that extracts
event information from event WMI_NDP_EVENTID. This event acts
as a response to command WMI_NDP_CMDID, and carries NDP
related status information for the host. Extract mac_id from
the updated TLV of NDP confirm and schedule update events.
Add modules and API's to support new NDP command and event.
Change-Id: Ibf6312cb3669b5e62ada3f4ad852be87f14ae09f
CRs-Fixed: 2384535
There are multiple issues with the Link Layer Stats Unified API:
- struct ll_stats_clear_params and struct ll_stats_get_params both
incorrectly use the identifier "sta_id" to refer to a vdev_id.
- struct ll_stats_set_params has an unused "sta_id" field.
- Functions wmi_unified_process_ll_stats_clear_cmd() and
wmi_unified_process_ll_stats_get_cmd() pass the MAC address as a
separate parameter rather than adhering to the commonly used
unified signature: func(handle, param).
- Not all of the functions and data structures are correctly protected
by the WLAN_FEATURE_LINK_LAYER_STATS feature flag.
Refine the Link Layer Stats Unified API to address these issues.
This is co-dependent with Ifd7c8de2358121dae4752525ff57021a32be85d3
("qcacld-3.0: Use the refined Link Layer Stats Unified API").
Change-Id: Ifdc1fada55a559f3b3d0837ec20cceb653c45c40
CRs-Fixed: 2409293
In struct hidden_ssid_vdev_restart_params the legacy identifier
session_id is currently used to identify the vdev of interest. To
align with the converged nomenclature rename this to vdev_id.
This is co-dependent with Ie8c426aff1a8a1e7f75199c8cf7c761f1a893a05
("qcacld-3.0: Use vdev_id in hidden_ssid_vdev_restart_params").
Change-Id: Iea0bf0a3dcae9186cce4eb176b974515fd0d7624
CRs-Fixed: 2403934
Enhance target_if/mlme/vdev_mgr by addressing
review comments and update response handling
APIs to handler timers and response bit maps
as expected
Change-Id: I8a5bf3f2931f0c36a367dfebfc898ed2621f3516
CRs-Fixed: 2397184
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
As part of the TDLS feature, structs sta_uapsd_trig_params and
sta_uapsd_params were replicated from qcacmn wmi_unified_param.h to
qcacld-3.0 wlan_tdls_public_structs.h, and conditional compilation
based upon CONVERGED_TDLS_ENABLE was used to determine which structs
are actually used by a build. Since these structs are not specific to
TDLS, remove the featurization so that the structs from qcacmn
wmi_unified_param.h are always used.
This is co-dependent upon I37b2d80a4710aced158dcf2ea973d15801a7cecc
("qcacld-3.0: Remove UAPSD trigger structs from TDLS public structs").
Change-Id: Ida0f2b6f131ff2dce7217b881ffadecfd685f563
CRs-Fixed: 2395822
Add the WMI PDEV param 'wmi_pdev_param_ul_ppdu_duration' to
add command support to modify the UL PPDU duration.
Change-Id: If2f8ef02d4f992d91fa745599d5c08b1dfccceca
CRs-fixed: 2393139
Add support for UL_RU26 WMI service which will notify the host if
the target has allowed UL_RU26
Change-Id: I639c0872f541cf30776c9f76b87c4b950c1e17f4
CRs-Fixed: 2390350
check for max_ast entries supported by FW and add the
entry on host accordingly.
Change-Id: Ief70ba631bb41d50c79d3673e3eea0c45b0c1e19
CRs-Fixed: 2355947
Added APIs to extract quiet information from swba, which
is supposed to be filled in Probe response.
Change-Id: I3289fc2a9d12294ec841461997db4239d0158398
CRs-Fixed: 2376067
Cleanup WMI to use new data structures in vdev mlme
for corresponding vdev mgmt op
Change-Id: I0126dcb34e569aac2af82de15e0f3362cf5a0a5e
CRs-Fixed: 2383346
Currently the driver uses structure for peer mac address
to store the mac address.
Use the already existing peer mac address array for the same.
Change-Id: Ib49b2ac4747fce3610da73a1d29c67ccaaeaad65
CRs-Fixed: 2390282
The TLV WMI added support for a new WMI_SERVICE_WLM_STATS_REQUEST
service along with an associated WMI_WLM_STATS_EVENTID event, so add
support for a proxy unified WMI service and event.
Change-Id: Ic79c4b757fe2d4e806306750250e3c102745c486
CRs-Fixed: 2388911
