Browse Source

qcacmn: Add WMI support for new roaming parameters

The below ini values are added to enhance roaming in firmware:
1. "minimum_btm_candidate_score"
2. "roam_scan_inactivity_time"
3. "roam_inactive_data_packet_count"
4. "roam_scan_period_after_inactivity"
5. "btm_roam_score_delta"
6. "idle_roam_score_delta"
7. "btm_roam_trigger_min_rssi"
8. "idle_roam_trigger_min_rssi"

The values of "roam_scan_inactivity_time" ,
"roam_inactive_data_packet_count" and
"roam_scan_period_after_inactivity" will be sent over the
WMI_ROAM_SCAN_PERIOD wmi command.
"minimum_btm_candidate_score" value will be sent in the
WMI_ROAM_BTM_CONFIG_CMDID command.
The values of "btm_roam_score_delta", "idle_roam_score_delta"
"btm_roam_trigger_min_rssi" and "idle_roam_trigger_min_rssi"
will be sent over the WMI_AP_PROFILE command in new tlv.

Add WMI support to send the introduced ini values to
firmware.

Change-Id: I117ed7490d14730423654513f416115822230486
CRs-Fixed: 2435676
Pragaspathi Thilagaraj 6 years ago
parent
commit
7cc507f412

+ 9 - 0
wmi/inc/wmi_unified_param.h

@@ -1958,6 +1958,12 @@ struct roam_fils_params {
  * @roam_fils_params: roam fils params
  * @rct_validity_timer: duration value for which the entries in
  * roam candidate table are valid
+ * @roam_scan_inactivity_time: inactivity monitoring time in ms for which the
+ * device is considered to be inactive
+ * @roam_inactive_data_packet_count: Maximum allowed data packets count during
+ * roam_scan_inactivity_time.
+ * @roam_scan_period_after_inactivity: Roam scan period in ms after device is
+ * in inactive state.
  */
 struct roam_offload_scan_params {
 	uint8_t is_roam_req_valid;
@@ -1992,6 +1998,9 @@ struct roam_offload_scan_params {
 	uint32_t assoc_ie_length;
 	uint8_t  assoc_ie[MAX_ASSOC_IE_LENGTH];
 	bool add_fils_tlv;
+	uint32_t roam_scan_inactivity_time;
+	uint32_t roam_inactive_data_packet_count;
+	uint32_t roam_scan_period_after_inactivity;
 #ifdef WLAN_FEATURE_FILS_SK
 	struct roam_fils_params roam_fils_params;
 #endif

+ 1 - 3
wmi/inc/wmi_unified_priv.h

@@ -553,9 +553,7 @@ QDF_STATUS (*send_roam_scan_offload_cmd)(wmi_unified_t wmi_handle,
 				 uint32_t command, uint32_t vdev_id);
 
 QDF_STATUS (*send_roam_scan_offload_scan_period_cmd)(wmi_unified_t wmi_handle,
-				     uint32_t scan_period,
-				     uint32_t scan_age,
-				     uint32_t vdev_id);
+					struct roam_scan_period_params *params);
 
 QDF_STATUS (*send_roam_scan_offload_chan_list_cmd)(wmi_unified_t wmi_handle,
 				   uint8_t chan_count,

+ 4 - 7
wmi/inc/wmi_unified_roam_api.h

@@ -207,18 +207,15 @@ QDF_STATUS wmi_unified_roam_scan_offload_cmd(void *wmi_hdl,
 /**
  * wmi_unified_roam_scan_offload_scan_period() - set roam offload scan period
  * @wmi_handle: wmi handle
- * @scan_period: scan period
- * @scan_age: scan age
- * @vdev_id: vdev id
+ * @param: pointer to roam scan period params to be sent to fw
  *
  * Send WMI_ROAM_SCAN_PERIOD parameters to fw.
  *
  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
  */
-QDF_STATUS wmi_unified_roam_scan_offload_scan_period(void *wmi_hdl,
-						     uint32_t scan_period,
-						     uint32_t scan_age,
-						     uint32_t vdev_id);
+QDF_STATUS
+wmi_unified_roam_scan_offload_scan_period(wmi_unified_t wmi_handle,
+					  struct roam_scan_period_params *param);
 
 /**
  * wmi_unified_roam_scan_offload_chan_list_cmd() - set roam offload channel list

+ 118 - 0
wmi/inc/wmi_unified_roam_param.h

@@ -126,6 +126,27 @@ struct roam_offload_scan_rssi_params {
 	uint32_t flags;
 };
 
+/**
+ * struct roam_scan_period_params - Roam scan period parameters
+ * @vdev_id: Vdev for which the scan period parameters are sent
+ * @scan_period: Opportunistic scan runs on a timer for scan_period
+ * @scan_age: Duration after which the scan entries are to be aged out
+ * @roam_scan_inactivity_time: inactivity monitoring time in ms for which the
+ * device is considered to be inactive
+ * @roam_inactive_data_packet_count: Maximum allowed data packets count during
+ * roam_scan_inactivity_time.
+ * @roam_scan_period_after_inactivity: Roam scan period in ms after device is
+ * in inactive state.
+ */
+struct roam_scan_period_params {
+	uint32_t vdev_id;
+	uint32_t scan_period;
+	uint32_t scan_age;
+	uint32_t roam_scan_inactivity_time;
+	uint32_t roam_inactive_data_packet_count;
+	uint32_t roam_scan_period_after_inactivity;
+};
+
 /**
  * struct wmi_mawc_roam_params - Motion Aided wireless connectivity params
  * @vdev_id: VDEV on which the parameters should be applied
@@ -407,16 +428,102 @@ struct scoring_param {
 	struct param_slot_scoring oce_wan_scoring;
 };
 
+/*
+ * Currently roam score delta value and min rssi values are sent
+ * for 2 triggers
+ */
+#define NUM_OF_ROAM_TRIGGERS 2
+#define IDLE_ROAM_TRIGGER 0
+#define BTM_ROAM_TRIGGER  1
+
+#define DEAUTH_MIN_RSSI 0
+#define BMISS_MIN_RSSI  1
+
+/**
+ * enum roam_trigger_reason - Reason for triggering roam
+ * ROAM_TRIGGER_REASON_NONE: Roam trigger reason none
+ * ROAM_TRIGGER_REASON_PER:  Roam triggered due to packet error
+ * ROAM_TRIGGER_REASON_BMISS: Roam triggered due to beacon miss
+ * ROAM_TRIGGER_REASON_LOW_RSSI: Roam triggered due to low RSSI of current
+ * connected AP.
+ * ROAM_TRIGGER_REASON_HIGH_RSSI: Roam triggered because sta is connected to
+ * a AP in 2.4GHz band and a better 5GHz AP is available
+ * ROAM_TRIGGER_REASON_PERIODIC: Roam triggered as better AP was found during
+ * periodic roam scan.
+ * ROAM_TRIGGER_REASON_MAWC: Motion Aided WiFi Connectivity triggered roam.
+ * ROAM_TRIGGER_REASON_DENSE: Roaming triggered due to dense environment
+ * detected.
+ * ROAM_TRIGGER_REASON_BACKGROUND: Roam triggered due to current AP having
+ * poor rssi and scan candidate found in scan results provided by other
+ * scan clients.
+ * ROAM_TRIGGER_REASON_FORCED: Forced roam trigger.
+ * ROAM_TRIGGER_REASON_BTM: Roam triggered due to AP sent BTM query with
+ * Disassoc imminent bit set.
+ * ROAM_TRIGGER_REASON_UNIT_TEST: Roam triggered due to unit test command.
+ * ROAM_TRIGGER_REASON_BSS_LOAD: Roam triggered due to high channel utilization
+ * in the current connected channel
+ * ROAM_TRIGGER_REASON_DEAUTH: Roam triggered due to deauth received from the
+ * current connected AP.
+ * ROAM_TRIGGER_REASON_IDLE: Roam triggered due to inactivity of the device.
+ * ROAM_TRIGGER_REASON_MAX: Maximum number of roam triggers
+ */
+enum roam_trigger_reason {
+	ROAM_TRIGGER_REASON_NONE = 0,
+	ROAM_TRIGGER_REASON_PER,
+	ROAM_TRIGGER_REASON_BMISS,
+	ROAM_TRIGGER_REASON_LOW_RSSI,
+	ROAM_TRIGGER_REASON_HIGH_RSSI,
+	ROAM_TRIGGER_REASON_PERIODIC,
+	ROAM_TRIGGER_REASON_MAWC,
+	ROAM_TRIGGER_REASON_DENSE,
+	ROAM_TRIGGER_REASON_BACKGROUND,
+	ROAM_TRIGGER_REASON_FORCED,
+	ROAM_TRIGGER_REASON_BTM,
+	ROAM_TRIGGER_REASON_UNIT_TEST,
+	ROAM_TRIGGER_REASON_BSS_LOAD,
+	ROAM_TRIGGER_REASON_DEAUTH,
+	ROAM_TRIGGER_REASON_IDLE,
+	ROAM_TRIGGER_REASON_MAX,
+};
+
+/**
+ * struct roam_trigger_min_rssi - structure to hold minimum rssi value of
+ * candidate APs for each roam trigger
+ * @min_rssi: minimum RSSI of candidate AP for the trigger reason specified in
+ * trigger_id
+ * @trigger_reason: Roam trigger reason
+ */
+struct roam_trigger_min_rssi {
+	int32_t  min_rssi;
+	enum roam_trigger_reason trigger_reason;
+};
+
+/**
+ * struct roam_trigger_score_delta - structure to hold roam score delta value of
+ * candidate APs for each roam trigger
+ * @roam_score_delta: delta value in score of the candidate AP for the roam
+ * trigger mentioned in the trigger_id.
+ * @trigger_reason: Roam trigger reason
+ */
+struct roam_trigger_score_delta {
+	uint32_t roam_score_delta;
+	enum roam_trigger_reason trigger_reason;
+};
+
 /**
  * struct ap_profile_params - ap profile params
  * @vdev_id: vdev id
  * @profile: ap profile to match candidate
  * @param: scoring params to short candidate
+ * @min_rssi_params: Min RSSI values for different roam triggers
+ * @score_delta_params: Roam score delta values for different triggers
  */
 struct ap_profile_params {
 	uint8_t vdev_id;
 	struct ap_profile profile;
 	struct scoring_param param;
+	struct roam_trigger_min_rssi min_rssi_params[NUM_OF_ROAM_TRIGGERS];
+	struct roam_trigger_score_delta score_delta_param[NUM_OF_ROAM_TRIGGERS];
 };
 
 /**
@@ -524,6 +631,8 @@ struct hlp_params {
  * @disassoc_timer_threshold: threshold value till which the firmware can
  * wait before triggering the roam scan after receiving the disassoc iminent
  * @btm_query_bitmask: bitmask to btm query with candidate list
+ * @btm_candidate_min_score: Minimum score of the AP to consider it as a
+ * candidate if the roam trigger is BTM kickout.
  */
 struct wmi_btm_config {
 	uint8_t vdev_id;
@@ -533,6 +642,7 @@ struct wmi_btm_config {
 	uint32_t btm_sticky_time;
 	uint32_t disassoc_timer_threshold;
 	uint32_t btm_query_bitmask;
+	uint32_t btm_candidate_min_score;
 };
 
 /**
@@ -541,11 +651,19 @@ struct wmi_btm_config {
  * @bss_load_threshold: BSS load threshold after which roam scan should trigger
  * @bss_load_sample_time: Time duration in milliseconds for which the bss load
  * trigger needs to be enabled
+ * @rssi_threshold_5ghz: RSSI threshold of the current connected AP below which
+ * roam should be triggered if bss load threshold exceeds the configured value.
+ * This value is applicable only when we are connected in 5GHz band.
+ * @rssi_threshold_24ghz: RSSI threshold of the current connected AP below which
+ * roam should be triggered if bss load threshold exceeds the configured value.
+ * This value is applicable only when we are connected in 2.4GHz band.
  */
 struct wmi_bss_load_config {
 	uint32_t vdev_id;
 	uint32_t bss_load_threshold;
 	uint32_t bss_load_sample_time;
+	int32_t rssi_threshold_5ghz;
+	int32_t rssi_threshold_24ghz;
 };
 
 /**

+ 5 - 8
wmi/src/wmi_unified_roam_api.c

@@ -193,16 +193,13 @@ QDF_STATUS wmi_unified_roam_scan_offload_cmd(void *wmi_hdl,
 	return QDF_STATUS_E_FAILURE;
 }
 
-QDF_STATUS wmi_unified_roam_scan_offload_scan_period(void *wmi_hdl,
-					     uint32_t scan_period,
-					     uint32_t scan_age,
-					     uint32_t vdev_id)
+QDF_STATUS
+wmi_unified_roam_scan_offload_scan_period(wmi_unified_t wmi_handle,
+					  struct roam_scan_period_params *param)
 {
-	wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl;
-
 	if (wmi_handle->ops->send_roam_scan_offload_scan_period_cmd)
-		return wmi_handle->ops->send_roam_scan_offload_scan_period_cmd(wmi_handle,
-				  scan_period, scan_age, vdev_id);
+		return wmi_handle->ops->send_roam_scan_offload_scan_period_cmd(
+							wmi_handle, param);
 
 	return QDF_STATUS_E_FAILURE;
 }

+ 150 - 26
wmi/src/wmi_unified_roam_tlv.c

@@ -1383,29 +1383,84 @@ send_roam_scan_mode_cmd:
 	return status;
 }
 
+/**
+ * convert_roam_trigger_reason() - Function to convert unified Roam trigger
+ * enum to TLV specific WMI_ROAM_TRIGGER_REASON_ID
+ * @reason: Roam trigger reason
+ *
+ * Return: WMI_ROAM_TRIGGER_REASON_ID
+ */
+static WMI_ROAM_TRIGGER_REASON_ID
+convert_roam_trigger_reason(enum roam_trigger_reason trigger_reason) {
+
+	switch (trigger_reason) {
+	case ROAM_TRIGGER_REASON_NONE:
+		return WMI_ROAM_TRIGGER_REASON_NONE;
+	case ROAM_TRIGGER_REASON_PER:
+		return WMI_ROAM_TRIGGER_REASON_PER;
+	case ROAM_TRIGGER_REASON_BMISS:
+		return WMI_ROAM_TRIGGER_REASON_BMISS;
+	case ROAM_TRIGGER_REASON_LOW_RSSI:
+		return WMI_ROAM_TRIGGER_REASON_LOW_RSSI;
+	case ROAM_TRIGGER_REASON_HIGH_RSSI:
+		return WMI_ROAM_TRIGGER_REASON_HIGH_RSSI;
+	case ROAM_TRIGGER_REASON_PERIODIC:
+		return WMI_ROAM_TRIGGER_REASON_PERIODIC;
+	case ROAM_TRIGGER_REASON_MAWC:
+		return WMI_ROAM_TRIGGER_REASON_MAWC;
+	case ROAM_TRIGGER_REASON_DENSE:
+		return WMI_ROAM_TRIGGER_REASON_DENSE;
+	case ROAM_TRIGGER_REASON_BACKGROUND:
+		return WMI_ROAM_TRIGGER_REASON_BACKGROUND;
+	case ROAM_TRIGGER_REASON_FORCED:
+		return WMI_ROAM_TRIGGER_REASON_FORCED;
+	case ROAM_TRIGGER_REASON_BTM:
+		return WMI_ROAM_TRIGGER_REASON_BTM;
+	case ROAM_TRIGGER_REASON_UNIT_TEST:
+		return WMI_ROAM_TRIGGER_REASON_UNIT_TEST;
+	case ROAM_TRIGGER_REASON_BSS_LOAD:
+		return WMI_ROAM_TRIGGER_REASON_BSS_LOAD;
+	case ROAM_TRIGGER_REASON_DEAUTH:
+		return WMI_ROAM_TRIGGER_REASON_DEAUTH;
+	case ROAM_TRIGGER_REASON_IDLE:
+		return WMI_ROAM_TRIGGER_REASON_IDLE;
+	case ROAM_TRIGGER_REASON_MAX:
+		return WMI_ROAM_TRIGGER_REASON_MAX;
+	default:
+		return WMI_ROAM_TRIGGER_REASON_NONE;
+	}
+}
+
 /**
  * send_roam_scan_offload_ap_profile_cmd_tlv() - set roam ap profile in fw
  * @wmi_handle: wmi handle
  * @ap_profile_p: ap profile
- * @vdev_id: vdev id
  *
  * Send WMI_ROAM_AP_PROFILE to firmware
  *
  * Return: CDF status
  */
-static QDF_STATUS send_roam_scan_offload_ap_profile_cmd_tlv(wmi_unified_t wmi_handle,
-					    struct ap_profile_params *ap_profile)
+static QDF_STATUS
+send_roam_scan_offload_ap_profile_cmd_tlv(wmi_unified_t wmi_handle,
+					  struct ap_profile_params *ap_profile)
 {
 	wmi_buf_t buf = NULL;
 	QDF_STATUS status;
-	int len;
+	size_t len;
 	uint8_t *buf_ptr;
 	wmi_roam_ap_profile_fixed_param *roam_ap_profile_fp;
 	wmi_roam_cnd_scoring_param *score_param;
 	wmi_ap_profile *profile;
+	wmi_roam_score_delta_param *score_delta_param;
+	wmi_roam_cnd_min_rssi_param *min_rssi_param;
+	enum roam_trigger_reason trig_reason;
 
 	len = sizeof(wmi_roam_ap_profile_fixed_param) + sizeof(wmi_ap_profile);
 	len += sizeof(*score_param);
+	len += WMI_TLV_HDR_SIZE;
+	len += NUM_OF_ROAM_TRIGGERS * sizeof(*score_delta_param);
+	len += WMI_TLV_HDR_SIZE;
+	len += NUM_OF_ROAM_TRIGGERS * sizeof(*min_rssi_param);
 	buf = wmi_buf_alloc(wmi_handle, len);
 	if (!buf) {
 		return QDF_STATUS_E_NOMEM;
@@ -1562,6 +1617,62 @@ static QDF_STATUS send_roam_scan_offload_ap_profile_cmd_tlv(wmi_unified_t wmi_ha
 		 score_param->roam_score_delta_pcnt,
 		 score_param->roam_score_delta_mask);
 
+	buf_ptr += sizeof(*score_param);
+	WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC,
+		       (NUM_OF_ROAM_TRIGGERS * sizeof(*score_delta_param)));
+	buf_ptr += WMI_TLV_HDR_SIZE;
+
+	score_delta_param = (wmi_roam_score_delta_param *)buf_ptr;
+	WMITLV_SET_HDR(&score_delta_param->tlv_header,
+		       WMITLV_TAG_STRUC_wmi_roam_score_delta_param,
+		       WMITLV_GET_STRUCT_TLVLEN(wmi_roam_score_delta_param));
+	trig_reason =
+		ap_profile->score_delta_param[IDLE_ROAM_TRIGGER].trigger_reason;
+	score_delta_param->roam_trigger_reason =
+		convert_roam_trigger_reason(trig_reason);
+	score_delta_param->roam_score_delta =
+		ap_profile->score_delta_param[IDLE_ROAM_TRIGGER].roam_score_delta;
+
+	buf_ptr += sizeof(*score_delta_param);
+	score_delta_param = (wmi_roam_score_delta_param *)buf_ptr;
+	WMITLV_SET_HDR(&score_delta_param->tlv_header,
+		       WMITLV_TAG_STRUC_wmi_roam_score_delta_param,
+		       WMITLV_GET_STRUCT_TLVLEN(wmi_roam_score_delta_param));
+	trig_reason =
+		ap_profile->score_delta_param[BTM_ROAM_TRIGGER].trigger_reason;
+	score_delta_param->roam_trigger_reason =
+		convert_roam_trigger_reason(trig_reason);
+	score_delta_param->roam_score_delta =
+		ap_profile->score_delta_param[BTM_ROAM_TRIGGER].roam_score_delta;
+
+	buf_ptr += sizeof(*score_delta_param);
+	WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC,
+		       (NUM_OF_ROAM_TRIGGERS * sizeof(*min_rssi_param)));
+	buf_ptr += WMI_TLV_HDR_SIZE;
+
+	min_rssi_param = (wmi_roam_cnd_min_rssi_param *)buf_ptr;
+	WMITLV_SET_HDR(&min_rssi_param->tlv_header,
+		       WMITLV_TAG_STRUC_wmi_roam_cnd_min_rssi_param,
+		       WMITLV_GET_STRUCT_TLVLEN(wmi_roam_cnd_min_rssi_param));
+	trig_reason =
+		ap_profile->min_rssi_params[DEAUTH_MIN_RSSI].trigger_reason;
+	min_rssi_param->roam_trigger_reason =
+		convert_roam_trigger_reason(trig_reason);
+	min_rssi_param->candidate_min_rssi =
+		ap_profile->min_rssi_params[DEAUTH_MIN_RSSI].min_rssi;
+
+	buf_ptr += sizeof(*min_rssi_param);
+	min_rssi_param = (wmi_roam_cnd_min_rssi_param *)buf_ptr;
+	WMITLV_SET_HDR(&min_rssi_param->tlv_header,
+		       WMITLV_TAG_STRUC_wmi_roam_cnd_min_rssi_param,
+		       WMITLV_GET_STRUCT_TLVLEN(wmi_roam_cnd_min_rssi_param));
+	trig_reason =
+		ap_profile->min_rssi_params[BMISS_MIN_RSSI].trigger_reason;
+	min_rssi_param->roam_trigger_reason =
+		convert_roam_trigger_reason(trig_reason);
+	min_rssi_param->candidate_min_rssi =
+		ap_profile->min_rssi_params[BMISS_MIN_RSSI].min_rssi;
+
 	wmi_mtrace(WMI_ROAM_AP_PROFILE, NO_SESSION, 0);
 	status = wmi_unified_cmd_send(wmi_handle, buf,
 				      len, WMI_ROAM_AP_PROFILE);
@@ -1631,18 +1742,16 @@ error:
 /**
  * send_roam_scan_offload_scan_period_cmd_tlv() - set roam offload scan period
  * @wmi_handle: wmi handle
- * @scan_period: scan period
- * @scan_age: scan age
- * @vdev_id: vdev id
+ * @param: roam scan parameters to be sent to firmware
  *
  * Send WMI_ROAM_SCAN_PERIOD parameters to fw.
  *
- * Return: CDF status
+ * Return: QDF status
  */
-static QDF_STATUS send_roam_scan_offload_scan_period_cmd_tlv(wmi_unified_t wmi_handle,
-					     uint32_t scan_period,
-					     uint32_t scan_age,
-					     uint32_t vdev_id)
+static QDF_STATUS
+send_roam_scan_offload_scan_period_cmd_tlv(
+		wmi_unified_t wmi_handle,
+		struct roam_scan_period_params *param)
 {
 	QDF_STATUS status;
 	wmi_buf_t buf = NULL;
@@ -1664,26 +1773,33 @@ static QDF_STATUS send_roam_scan_offload_scan_period_cmd_tlv(wmi_unified_t wmi_h
 		       WMITLV_GET_STRUCT_TLVLEN
 			       (wmi_roam_scan_period_fixed_param));
 	/* fill in scan period values */
-	scan_period_fp->vdev_id = vdev_id;
-	scan_period_fp->roam_scan_period = scan_period; /* 20 seconds */
-	scan_period_fp->roam_scan_age = scan_age;
+	scan_period_fp->vdev_id = param->vdev_id;
+	scan_period_fp->roam_scan_period = param->scan_period; /* 20 seconds */
+	scan_period_fp->roam_scan_age = param->scan_age;
+	scan_period_fp->inactivity_time_period =
+			param->roam_scan_inactivity_time;
+	scan_period_fp->roam_inactive_count =
+			param->roam_inactive_data_packet_count;
+	scan_period_fp->roam_scan_period_after_inactivity =
+			param->roam_scan_period_after_inactivity;
+
+	WMI_LOGD("%s: roam_scan_period=%d, roam_scan_age=%d", __func__,
+		 scan_period_fp->roam_scan_period,
+		 scan_period_fp->roam_scan_age);
+	WMI_LOGD("%s: inactiviy period:%d inactive count:%d period after inactivity:%d",
+		 __func__, scan_period_fp->inactivity_time_period,
+		 scan_period_fp->roam_inactive_count,
+		 scan_period_fp->roam_scan_period_after_inactivity);
 
 	wmi_mtrace(WMI_ROAM_SCAN_PERIOD, NO_SESSION, 0);
-	status = wmi_unified_cmd_send(wmi_handle, buf,
-				      len, WMI_ROAM_SCAN_PERIOD);
+	status = wmi_unified_cmd_send(wmi_handle, buf, len,
+				      WMI_ROAM_SCAN_PERIOD);
 	if (QDF_IS_STATUS_ERROR(status)) {
-		WMI_LOGE("wmi_unified_cmd_send WMI_ROAM_SCAN_PERIOD returned Error %d",
-			 status);
-		goto error;
+		wmi_buf_free(buf);
+		return status;
 	}
 
-	WMI_LOGI("%s: WMI --> WMI_ROAM_SCAN_PERIOD roam_scan_period=%d, roam_scan_age=%d",
-		 __func__, scan_period, scan_age);
 	return QDF_STATUS_SUCCESS;
-error:
-	wmi_buf_free(buf);
-
-	return status;
 }
 
 /**
@@ -2044,6 +2160,7 @@ static QDF_STATUS send_btm_config_cmd_tlv(wmi_unified_t wmi_handle,
 	cmd->stick_time_seconds = params->btm_sticky_time;
 	cmd->disassoc_timer_threshold = params->disassoc_timer_threshold;
 	cmd->btm_bitmap = params->btm_query_bitmask;
+	cmd->btm_candidate_min_score = params->btm_candidate_min_score;
 
 	wmi_mtrace(WMI_ROAM_BTM_CONFIG_CMDID, cmd->vdev_id, 0);
 	if (wmi_unified_cmd_send(wmi_handle, buf, len,
@@ -2089,6 +2206,13 @@ send_roam_bss_load_config_tlv(wmi_unified_t wmi_handle,
 	cmd->vdev_id = params->vdev_id;
 	cmd->bss_load_threshold = params->bss_load_threshold;
 	cmd->monitor_time_window = params->bss_load_sample_time;
+	cmd->rssi_2g_threshold = params->rssi_threshold_24ghz;
+	cmd->rssi_5g_threshold = params->rssi_threshold_5ghz;
+
+	WMI_LOGD("%s: vdev:%d bss_load_thres:%d monitor_time:%d rssi_2g:%d rssi_5g:%d",
+		 __func__, cmd->vdev_id, cmd->bss_load_threshold,
+		 cmd->monitor_time_window, cmd->rssi_2g_threshold,
+		 cmd->rssi_5g_threshold);
 
 	wmi_mtrace(WMI_ROAM_BSS_LOAD_CONFIG_CMDID, cmd->vdev_id, 0);
 	if (wmi_unified_cmd_send(wmi_handle, buf, len,