Increase the CE ring that is used by firmware for HIF memcpy.
Increase the size to 0x4000
Change-Id: I8a71c795469b7cd51c3c2609a8e22a3b19ab7e77
CRs-Fixed: 1006872
Fastpath & napi did not have CE event recording.
This is a vital debug feature.
Change-Id: I73118f4fa5177158d6d489ea5b9ebf82f05c1229
CRs-Fixed: 1009273
CE_COUNT_MAX should be the maximum number of CE's supported.
Set it to 12 to support all chipsets dynamically.
Change-Id: Id65278ee452a4ca2e3b0dcfe5c082a7e7a286347
CRs-Fixed: 1002084
TargetSendSuspendComplete should take the HTCInitInfo
context as an argument. The wow_nack should be its
own argument.
Change-Id: Ib13385cf0a04730d066ffcd53c1f669c7a5ced60
CRs-Fixed: 1003793
Use QDF macro to check if we are in epping mode.
Hardcode the ce engine to use interrupts in
epping mode.
Change-Id: Ie58c2efffdced03f24905469319eabc0af4ed228
CRs-Fixed: 1003792
A definition of cnss_wlan_pci_link_down in a header file
did not have the static keyword.
Change-Id: I701682486a8db2c0cfce839706aacb85757df616
CRs-Fixed: 1003817
icnss_dispatch_irq is a stub for a non-existent function.
Make a pci function that doesn't use a global data structure.
Change-Id: I636d59cb465acf1366269d96a5dcacf910f8d78c
CRs-Fixed: 1002083
Remove interupt enable/disable at group level since
in register set 81, these registers are not provided.
Don't enable/disable the ce irqs at the qgic
since the interrupts are edge driven, enabling and disabling the interrupt
in the qgic should not be necessary. Also remove an unneeded read
of a status register.
Change-Id: I2c20ea26c23dc672697d53cd5433d855d9332b13
CRs-Fixed: 997176
qcacld-2.0 to qcacmn propagation
Issues are seen where memory allocation takes 300-1000ms.
So to detect this reduce the QDF_GET_MEMORY_TIME_THRESHOLD value
to print the time taken by kmalloc, to 300ms from 3 sec.
Change-Id: I0f7e1587b2ddd2839d70a19b047aa46bb6a2cea1
CRs-Fixed: 970017
Replace the WMI command WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID
and event WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID with
WMI_PDEV_SET_MAC_CONFIG_CMDID and
WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID respectively since
the former are obsolete. The new WMI commands and events
additionally carry the pdev id.
Change-Id: I77eab3ead005bbb7f951ce7e077cd661813cb628
CRs-Fixed: 989502
Replace the obsolete WMI command WMI_SOC_SET_HW_MODE_CMDID with
WMI_PDEV_SET_HW_MODE_CMDID and event WMI_SOC_SET_HW_MODE_RESP_EVENTID
with WMI_PDEV_SET_HW_MODE_RESP_EVENTID respectively. These new WMI
commands and events additionally carry the pdev id and all mac id
references are replaced with pdev id.
Change-Id: If2a3f93dcd1947eedce8d4eac8ed936166f7e078
CRs-Fixed: 989502
Add target bus type field in qdf context, as bus type
needs to accessed at multiple layer.
Change-Id: I62b23d68743fedf205bb3859c0de50568ca09b7a
CRs-Fixed: 1009993
FL macro definition is used in converged layer, move
FL macro definition from umac layer to common QDF layer.
Change-Id: Id3c4383c385eb3d6391c4c066b0034fb2f053cdc
CRs-Fixed: 1008835
Replace mac_id with pdev_id for WMI pdev commands and
vdev start response handler to support multi-radio in
converged firmware. In order to maintain backward
compatibility with old fw, host needs to check
WMI_SERVICE_DEPRECATED_REPLACE service id in service
bitmap and needs to fill pdev id or mac id accordingly.
Change-Id: I7e6b40b4c0bd20e967dc0a383b480068e256486f
CRs-Fixed: 994415
Do not update physical address in control block while
nbuf push/pull operation for WIN.
Also uncomment dma_sync_single_for_cpu function in
__qdf_nbuf_sync_single_for_cpu.
Change-Id: Id80ed3e01162e44d90981885c3d387950323bce8
CRs-Fixed: 1006569
WIN platform uses non-tlv implementation for host to
target wmi commands. Add support for non-tlv
implementation in common wmi layer.
Change-Id: I1f832695b0d41b521be6b18df0cad31aae11b6c9
Acked-by: Kiran Venkatappa <kiranv@qti.qualcomm.com>
CRs-Fixed: 1005778
Update htc_endpoint only for htt tx endpoint to avoid
double freeing of Tx Queue packets as it will be
freed in htt_htc_misc_pkt_pool_free.
Rename htc_endpoint to htc_htt_tx_endpoint to reflect
it's appropriate use.
Change-Id: I736ba08505acc829eb15be30538553dd945695f6
CRs-Fixed: 1006498
WLAN host driver is not using correct API to allocate 2 MB shared
memory for FW when QMI by pass is enabled. Use proper API to
allocate 2 MB shared memory for FW CE access.
Change-Id: I7efa4be2e703b32dc86fd660640881afa4ce2bcd
CRs-Fixed: 999278
Replace the obsolete WMI command WMI_SOC_SET_PCL_CMDID with
WMI_PDEV_SET_PCL_CMDID. WMI_PDEV_SET_PCL_CMDID carries the weightage
for all the channels (preferred and non-preferred) in the same order
and length as that of the command WMI_SCAN_CHAN_LIST_CMDID. This is
in contrast to the command WMI_SOC_SET_PCL_CMDID which carries only
the preferred channel list.
Change-Id: I040f4307491d3242d2e9409dbbe8005c4b307bf5
CRs-Fixed: 989502
Corresponds to SU 172 qcacld-3.0 unconverged
Matches Component wlan-cld3.driver.lnx.1.1 version 5.1.0.3
Change-Id: Ie61bbeb608132cdfbc2b0a5b49e6aa79c5ad28a5
CRs-Fixed: 688141
Enable HTT_DATA2_MSG_SVC and HTT_DATA3_MSG_SVC, using only
rx legs, CE 9 and 10, respectively. Add required CE entries
to the map that gets sent to the FW, and define the latter
service.
Rename htc_endpoint to htc_tx_endpoint in htt_pdev to
represent the role better.
Acked-by: Orhan K AKYILDIZ <oka@codeaurora.org>
Change-Id: I81ae796bdb7e632aa24f15c63a2811791dd29d28
CRs-Fixed: 982728
If there is rx pending, the per_engine_service caller should
not reenable interrupts. If the caller does propper interrupt
mitigation, it will not enable interrupts, and the register
write is wasted. If the caller does not do interrupt mitigation,
leaving the interupt status will prevent stuck packets.
Change-Id: I7a6315d3f0f3ade1b2d51ce15fab931a4864e643
CRs-Fixed: 998319
Use the rx_pending flag to determine if there is more work.
hif_napi_poll should not rely on the amount of work done
to determine if there is more work to do.
Change-Id: Ibf83cfb8f9aed6fdc3400b6a6945156283f56485
CRs-Fixed: 998319
With more copy engines, the diag ce was not moved to the end.
The diag_ce was being assigned a null value from the unitialized
index.
Change-Id: Ib0fc6450712af2dc5e38f00bb692cfb26982ddae
CRs-Fixed: 997175
qcacld-2.0 to qcacld-3.0 propagation
In case of DFS channels and EBT is disabled, beacons are
forwarded to host in every 50msecs which increase power consumption.
Add the changes to set beacon filter once DUT connect to AP.
CRs-Fixed: 973958
Change-Id: I1a9379eacbd13f8dc7fae08923cd91f087d1b2b2
qcacld-2.0 to qcacld-3.0 propagation
Provide support to configure duty cycle by adding ini item for
different level duty cycle.
CRs-Fixed: 990798
Change-Id: I95e4f4af669fd50c5b9fc10ffc61fa5d447b5bcf
qcacld-2.0 to qcacld-3.0 propagation.
Fix compilation error introduced due to change in WMI
interface structure definition changed by CL 1479065.
Change-Id: I83d50bc046961ab90bcfbb164d5d64296ff95d9f
CRs-Fixed: 865207
qcacld-2.0 to qcacld-3.0 propagation.
WMI change to enable Custom aggregation size for ADDBA request and
response through WMI command WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID.
Change-Id: I0fb54e8f32344b209787239ed64d7ecb13ea56fb
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Periodic channel stats and WMI chan info extension
Define a flag which indicates the packet responsible
for wake up the host from suspend mode
Change-Id: Ieb5f47f16c5f55790511e02d97db57f4fdf6de97
CRs-Fixed: 865207
There is race condition in HTCTrySend() where it is
clearing TxProcessCount after releasing target lock
which is resulting it in WMI command stuck as other
thread check TxProcessCount and returns after
putting command in queue.
Fix above race condition by unlocking target lock
after clearing TxProcessCount.
Change-Id: I80d69bf583d3eb3c9800c69d7917921aa959f866
CRs-Fixed: 991142
QDF_FTM_MODE is deprecated. QDF_GLOBAL_FTM_MODE is the enum for the
ftm driver mode now.
Change-Id: I8783fb2d3748ed08995b3b13eaf69a7a1c40c22b
CRs-Fixed: 991822
