Change the cfg enablement check APIs (currently FISA),
to static inline, in order to avoid function call
every time to check if the feature is enabled or not.
Change-Id: Ie541313c1b0a7512f71a6189a706871e57b3145e
CRs-Fixed: 3540739
Currently FISA accesses the dp_soc (converged DP soc handle)
for various misc info (like hal_soc handle etc). Since these
information are now stored in the non-converged DP component,
there is no need to access dp_soc.
Cleanup the access to dp_soc (converged DP soc handle) in
the FISA path.
Change-Id: I6f373eb1ee57933d631237f7281c99bfceb100c3
CRs-Fixed: 3512048
Add CDP APIs to send FISA related HTT msgs from the
non-converged DP component.
Change-Id: Ie8dcb5d68497ac0de4c0781c981ede2239df0a78
CRs-Fixed: 3512045
During FTM mode start modules there is possibility from recovery path
bus bw timer stop is being called before dp_ops gets initialized.
This will lead to accessing uninitialized dp_ops access, to avoid this
check for conn mode before accessing the dp_ops and skip timer stop.
Change-Id: I3aef52f70bc0ea6294c87e7cd889ec63a4a6e3a4
CRs-Fixed: 3531437
Currently connectivity logging is done for all opmode
but logging should be done only for STA mode.
So to fix the issue add check for opmode and skip
connectivity logging if opmode is not STA
Change-Id: Iae225faa0fb7f141a46979c90ac4c2374f8a8832
CRs-Fixed: 3515363
Introduce DP memory profile selection based on H.W
capabilities supported. Based on H.W capabilities
decide kind of memory profile required for DP operations
and select that profile for resource allocation, so that
resource/memory allocation will be done effectively.
Change-Id: Iffbea0cfd9e6b79f0c1ad9526217ba6922f6cdb6
CRs-Fixed: 3504128
The IOVA for the buffers that are attached to the direct
link receive copy engine need to be contiguous for optimal
memory mapping on ADSP.
Fix is to add multi pages prealloc support for HIF layer
and add a pool entry to multi pages prealloc for direct
link receive copy engine.
Change-Id: Ieb253bd3c1b6550e4c1c63cd587993891ac817f2
CRs-Fixed: 3497689
Currently the CDP handles like soc/hif/hal_soc are not
available in any of the the DP component contexts.
Modules like FISA etc need these handles.
Store the CDP handles like soc/hif_handle/hal_soc in
the DP component context.
Change-Id: Iaee4d0e15cbaa7d871dc9e246d177ad310b4c6ba
CRs-Fixed: 3505720
Currently the txrx_ops are not saved in the
non-converged datapath.
Store all the txrx_ops in DP component, when
they are registered with the vdev. This can be
used in the DP component to get and use these
ops.
Change-Id: I30bfc69a32e0a9f0ab16f902a94a8c28ef4af8a6
CRs-Fixed: 3505719
Currently if hash-based routing fails, packets will be sent
with default routing which will result in packet being queued
to REO2SW1 with tlv reo_dest_indication = 1. Host will create fisa
flow with napi = 0 for REO2SW1.
When next packet received with correct tlv reo_dest_indication value
on different REO with flow_index_invalid = 1 and if tuple matches
with earlier created flow, it can result in REO mismatch issue.
To fix the issue if rx_hash is enabled add check for
tlv reo_dest_indication value.
Change-Id: Ib0895ce666cc788a6df8ae3483e0777e84937ef8
CRs-Fixed: 3500655
Currently OSIF calls the CDP API for DP suspend/resume
handler directly.
Move these calls to DP component so that DP component
can handle the suspend/resume related operations for
internal DP sub-modules (which are outside CDP).
Change-Id: I080809904f619260c707cacbcdbf158250320081
CRs-Fixed: 3502507
Currently the CDS layer calls the cdp functions
directly to initialize common DP.
Move these calls to DP component, so that DP
component can handle other DP related initialization
inside the DP component itself.
Change-Id: Ib257ac4f41d468706078cd34a8cbec004a9a622e
CRs-Fixed: 3499726
The number of perf CPU clusters can vary across
different targets. Currently only the second CPU
cluster is considered as the perf cluster, whereas
there can be more than 1 perf clusters.
Fix this perf cluster derivation for interrupt affinity.
Change-Id: Idecc98701e38bd2315846d6500068dcdd8f1309e
CRs-Fixed: 3498023
Logs without meaningful message or values serves no purpose in debugging.
Hence, add more context to the logs.
Change-Id: Ie913f7460356a1550b5252fd72ed5b454c67b3cf
CRs-Fixed: 3492709
Currently, as part of wlan_hdd_stop_modules, direct link config
is not being cleared but hif link state vote is cleared, as a
result when hdd_close_adpater() is called, link state is already
cleared, resulting in crash, as config is still enabled.
To fix this, clearing config as part of direct link context
de-initialization.
Change-Id: I1a5de6f427b5bc4dc4fe4346e53354645ad53529
CRs-Fixed: 3495027
There is a race condition where profile for direct link is set but
hif link was not yet voted up to prevent suspend. Parallelly,
direct link config is cleared in different context causing hif link
to vote down without being voted up which resulted in crash.
To fix this, create a mutex lock and move all the config set
operations inside the lock.
Change-Id: I80924d9ed52a9889a178b98469be15af0454b022
CRs-Fixed: 3490442
Add multi page prealloc pools for TX buffers and CE
TX buffers for direct link datapath.
Change-Id: I8c8be42b0530de39293ad8e45f47e16f90ea7767
CRs-Fixed: 3490109
Add support for sending QMI WFDS misc request to QMI
server on Direct link deinit.
Change-Id: I611625d83719c0f8a7dfbef1d3c8328cb618ef7f
CRs-Fixed: 3454630
Remove the INIT_TX_RX_SUCCESS adapter flag as its
functionality is insignificant after DP componentization.
Change-Id: Ief86ab81c42b767113bde46252246fa8677588ce
CRs-Fixed: 3399329
The following patch removed all usage of the rx_skip_qdisc_chk_conc
member of struct wlan_dp_psoc_context:
qcacld-3.0: Move TC based dynamic GRO logic to DP component
Change-Id I3c6658e8f19a71e548c77ff6fd637148925008d7
Since this is obsolete, remove it.
Change-Id: I13fbc9dd60466800070c968ec6d89ffa16734b5f
CRs-Fixed: 3427563
Currently if the pkt tlvs indicate flow_invalid=0,
there is no sanity done on the SW flow table entry
retrieved using the flow_idx from pkt tlvs.
In case of HW incorrectly sending a invalid flow_idx,
within the range of allowed flow_idx, and flow_invalid=0,
there will be an attempt to aggregate an invalid flow.
This can also trigger a RX ring id mismatch.
In order to mitigate the above issue, verify if the
SW flow table has been populated, before attempting
FISA aggregation.
Change-Id: Idb445c0c5b249d747dbce61f31513ba4a75c26b7
CRs-Fixed: 3412721
Skip the FISA aggregation and drop the frame if the reo destination
indication is zero in the packet TLVs.
Change-Id: I9bd02652bf321202f6b59e6da98fc6959ab93413
CRs-Fixed: 3426355
One of the parameters to the ucfg_dp_config_direct_link() stub
implementation does not match the associated parameter in the
prototype. The stub and the prototype should match, so modify the
stub to align with the prototype, which matches the non-stub
implementation.
Change-Id: If9dda7db2bfbbce94c0356a73b33ae7569337955
CRs-Fixed: 3424788
DP TXRX module is not cleaned when DP Rx thread init failed
To fix this, when DP Rx thread init fails, free DP TXRX module
as part of failure sequence.
Change-Id: I311b84a76036c8dd1e60b9f8c653fc126e031543
CRs-Fixed: 3413933
If roaming is triggered by source CM_ROAMING_NUD_FAILURE,
then per the INI gEnableNUDTracking to check whether
disconnect current connection or not.
gEnableNUDTracking=2, keeping the connection
gEnableNUDTracking=3, disconnect the connection
Change-Id: I0f321dcf5f3fc1bf7d0c93fa0d70bf4770ccaf35
CRs-Fixed: 3412213
Previously, IPA had its default vote which will bump up the SNOC
frequency to 200 MHz. Now IPA has removed its vote which is
causing throughput drop in HE cases for SAP and P2P GO mode.
To fix this, add new throughput level TPUT_LEVEL_HIGH_HE_CASE and
provide ini to set its threshold to increase SNOC frequency to
200 MHz. To enable, set ini BandwidthMidHighThreshold to 7000.
Change-Id: Ica8c640597c37602aea2f5e4ff6b0646c49ff548
CRs-Fixed: 3297833
Currently while updating EAPOL stats, there is no check
for subtype greater than array size, which can result in OOB access.
To fix the issue add additional check for subtype <= EAPOL M4 to
avoid OOB access.
Change-Id: I906ce9166b7a0202335403c77dc6bcd135dea663
CRs-Fixed: 3387939
Add pre-alloc entries for datapath config events
history, so that the memory for this history is
pre-allocated and not freed on every wifi off.
Change-Id: Iae1013c68a77d7da719400579af43369d9663163
CRs-Fixed: 3379157
When component dependent functions calling from higher
modules or any other components, it uses ucfg APIs pattern.
Calling ucfg dependent APIs is acceptable for higher modules
like HDD, OSIF but for another components like DP to avoid
using ucfg APIs here, implementing component APIs for existing
ucfg APIs to other components like NAN, vdev_mgr in DP
component module.
Change-Id: Ia5431c7de7fc944aacf5c8a328072a8ec31e8f3f
CRs-Fixed: 3351496
Create sysfs file for direct link unit test command to
generate traffic from LPASS.
Add ini to enable direct link unit testing.
Change-Id: I5b143bc6751eedb1a65cd836ea738744b72cc2cc
CRs-Fixed: 3365576
Currently, based on config_direct_link variable, link is voted
up or down which can result in same multiple votes.
To fix this, vote link up or down if there is a change in
previous config and incoming config_direct_link argument.
Also, return status success when direct link is not enabled
but dp_config_direct_link is called.
Change-Id: I4f54d74a9d4921f27f247450f89a03d6dabc838e
CRs-Fixed: 3375395
