Add QCA vendor attributes to spectral scan related vendor commands to
support agile spectral scan.
CRs-Fixed: 2466336
Change-Id: I855389a1839d70478a55ff7bd386e196fa3988dd
Add interface API to send reject ap list to FW,
also add the blacklist manager UMAC, and QDF component
for the same.
Change-Id: I826e537683441762043003d71dc2b79ceebebbcb
CRs-Fixed: 2460770
In practice, some APs have interop issues with the DUT. This sub command
is used to transfer the AP info between the driver and user space. This
works both as a command and event. As a command, it configures the
stored list of APs from user space to firmware; as an event, it
indicates the AP info detected by the firmware to user space for
persistent storage. The attributes defined in enum
qca_vendor_attr_interop_issues_ap are used to deliver the parameters.
Change-Id: I18c8f5b9555573cf3d732ad14e83840f56a74d48
CRs-Fixed: 2441046
Currently, there is no attribute to get information for roam reason.
Atrribute QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON is added in
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH command to inform
the roam reason. An enum qca_roam_reason is defined for the valid
values of the QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_ROAM_REASON.
Change-Id: I7f51e1c0905840235098600530bb027f6badb76e
CRs-Fixed: 2425898
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING
to implement beacon reporting feature. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE.
Userspace requests the driver/firmware to periodically report received
Beacon frames whose BSSID matches the current connected BSS's MAC
address. If userspace requests the driver/firmware to send beacon
reports actively, the driver encapsulates the details of the beacon in
an event and sends it to userspace asynchronously. Otherwise, the driver
will only update the beacon in cfg80211 scan cache but will not send any
event to userspace.
If this command is not issued, the current behavior of the
driver/firmware is to update the cfg80211 scan cache only when there is
a scan issued by the host in progress or whenever there is a change in
IEs of the Beacon frames from the current connected BSS.
The userspace requests the driver/firmware to stop reporting beacons
when reporting is not required anymore. If the driver/firmware is not
able to receive Beacon frames because of other Wi-Fi operations such as
off-channel activities, etc., the driver/firmware sends a pause event to
userspace and stops reporting Beacon frames. The driver/firmware
indicates whether the beacon reporting automatically resumes later by
using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If
userspace doesn't want the beacon reporting to be resumed automatically,
userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to
the driver to stop beacon reporting.
Change-Id: Iaefecc744ba07bb573a98fd5e6e4705b16f8d2c8
CRs-Fixed: 2446114
Currently capability information and RX multicast broadcast
packet count of the connected peer is not getting
cached.
Add support to cache the capability info from assoc request and
RX multicast broadcast packets from FW.
Change-Id: I105e055b1e440852e8e6b508c25e45f79db2d062
CRs-Fixed: 2409521
Currently there is no support to send twt capability to
user space.
Add Support to advertise twt capability to user space using
vendor flag QCA_WLAN_VENDOR_FEATURE_TWT when get capability
vendor command is invoked.
Change-Id: I9d6d3dc975485a5d1ad38d4f7c2830b05619a14b
CRs-fixed: 2424356
Customers need to config the coex priority on some scenarios.
qca_vendor_attr_coex_config_three_way will specifies the
vendor coex config attributes. Host will transfer these
attributs by WMI command.
Change-Id: I6aefcfc3ab13cb982e21ca68701b50731f00ca4d
CRs-Fixed: 2410486
This subcommand is used to update zigbee state and specified wlan durations
to enhance success ratio of zigbee joining network.
NL attributes qca_mpta_helper_vendor_attr is used to deliver the parameters
to host driver.
Change-Id: I7ec82e11fa3aaea88f20e1c04c464153549bf44c
CRs-Fixed: 2413320
Add nl vendor id and attributes for peer stats cache flush.
Peer rate statistics is per-peer cached data in host driver,
these statistics needs to be flushed to user space on
synchronous/asynchronous events.
This command is used to flush per-peer cached statistics
to application
CRs-Fixed: 2397918
Change-Id: Ie75e11e5949e754dd4779f88f1f6aeb984873f32
Update the enum qca_wlan_vendor_attr_offloaded_packets
with the one present in the hostapd's qca-vendor.h
Change-Id: I510d91ab55705f6eed7e676fcda9c469e5c72aca
CRs-Fixed: 2404707
Add new vendor attribute for preferred channels list with weight
value and a flag to indicate how the channels should
be used in p2p negotiation process.
Change-Id: I7b7926bf2aa714be51a8c28e619bbe426d9d2a4c
CRs-Fixed: 2405321
Previously host driver only supports initial SAE and Suite-B
authentication types and roaming to SAE AP is blocked. The
802.11 specification has introduced the Akm suite 00:0F:AC:9 for
FT-SAE and 00:0F:AC:13 for FT Suite-B akm type. Add support for
FT-SAE and FT-Suite-B.
Extend the enum wlan_auth_type to include WLAN_AUTH_TYPE_FT_SAE,
WLAN_AUTH_TYPE_FT_SUITEB_EAP_SHA384. This enum wlan_auth_type is
the new implementation for akm type in converged scan module
corresponding to the legacy eCsrAuthType enum.
Add changes in scan module filter to support FT-SAE and
FT-Suite-B authentication suites be added to filter->auth_type.
csr_scan_get_result() will translate the legacy eCsrAuthType
to wlan_auth_type and push it to the filter->auth_type.
Change-Id: I74d7b0be74d33ced5d3e528032aec6e057a75ff3
CRs-Fixed: 2400683
Add the support to allow user space applications through cfg80211
vendor command to check if wlan firmware is alive or not.
Change-Id: If8346537eea6fe5c4978f6bc973e8d7b420557d9
CRs-Fixed: 2399493
Currently there is no support from driver to send STA authorized
event to supplicant.
Use QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES vendor command to
send STA authorized event to supplicant.
Change-Id: I46416949f04dd28a1713cbebf1f7d0e84b5efda2
CRs-Fixed: 2175481
User layer need to get evm info of each groups of antenna.
Host first get this info by WMI command and then transfer it
to user layer with attribution QCA_WLAN_VENDOR_ATTR_CHAIN_EVM
in netlink.
Change-Id: I66b745b0fd1052b0c75d45376334e5d08d35ae10
CRs-Fixed: 2381139
Define QCA vendor command attributes to configure HE +HTC support and
HE operating mode control transmission.
Change-Id: I6249a23ab0d0b9a82210c749dfd6bd53fb697c51
CRs-Fixed: 2377769
As part of the NAN Discovery DBS support, new vendor command
- QCA_NL80211_VENDOR_SUBCMD_NAN_EXT - has been defined that
can carry the binary blob encapsulated within an attribute
and can carry additional attributes to enhance the NAN command
interface. Add the related definitions to support this command.
Add definitions to support the new NAN EXT vendor command.
Change-Id: I83c12c7512066434f8974619e1d953ac78d3a40d
CRs-Fixed: 2339032
Define new test config attribute to configure action frame
transmission in HE trigger based PPDU.
Change-Id: Iad53381ec75303ba0717292b1cff94e94cda3de5
CRs-Fixed: 2322602
Define new test config attribute to configure HE single user
PPDU transmission.
Change-Id: I4539ead98f31d0f0c4dee0534f6a8f29b8bd86cc
CRs-Fixed: 2322595
Add a new wifi test config QCA vendor attribute to configure
HE operating mode control field bandwidth and number of
spatial streams.
Change-Id: Ibe70d28329353e48c7bb323ab367c63be9706038
CRs-Fixed: 2320749
Define new test config attribute to configure the support
for receiving the MPDU with operating mode control field.
Change-Id: I8f4885ebc705e2d6acfa0c97bdcd6b2bb4baaaca
CRs-Fixed: 2305757
Define new wifi test config attribute to override the MU EDCA
params with defaults in the driver.
Change-Id: Ic12e322a82a558a5b01e13d6d5e288eb6933c1cc
CRs-Fixed: 2290381
Add vendor command support to enable or disable GTX.
Currently there is no vendor attribute to enable/disable
GTX from vendor command. Add vendor attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_GTX support through
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION vendor command
and with new wmi command WMI_VDEV_PARAM_GTX_ENABLE.
Change-Id: I8a740f9209ffd5f6438c3cfdd830ee2a76d0aa52
CRs-Fixed: 2261322
Android Packet Filter 3.0 requires the framework to be able to
read and write into the APF work memory in the Firmware. It
also requires to be able to enable or disable the interpreter.
New WMI commands are defined for read/write/enable/disable
operations.
Complete the implementation of these new commands.
Change-Id: I852d61eb213d9ae530e8a71069144ef35816f5b8
CRs-Fixed: 2184971
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I606afc747cddedb524a41cd8e5998400f04e69f6
CRs-Fixed: 2191531
Add support to send regulatory rules info in regulatory sync
event to user space for self managed regulatory when regulatory
info is updated.
Change-Id: Iac8704598fd181e47cb023405dfe592c4c93f51b
CRs-Fixed: 2242701
Update qca_vendor with NAN attributes for TCP/IP info for IPv6
address transport port and transport protocol.
Change-Id: I2176cede68347c92b6f4ddddadfa56b9591ff8fa
CRs-Fixed: 2244176
Address the following issues in qca_vendor.h:
CHECK: 'Minumum' may be misspelled - perhaps 'Minimum'?
CHECK: 'staion' may be misspelled - perhaps 'station'?
Change-Id: Ifbeec8544ffefa45b9b211c888e65b418695ad38
CRs-Fixed: 2241579
Update qca_vendor.h with latest NDP vendor attribute definitions
and use those definitions in NAN component.
Change-Id: I43f0457690b1c4027adcd0abe4ef2ac2a8f9b068
CRs-Fixed: 2239047
Add new attributes to vendor subcmd
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET.
This carry the requisite information to
start / stop the connectivity stats collection.
CRs-Fixed: 2168412
Change-Id: Ie8a60754780433f40ed4d103b737c5e8d4e59c28
Add vendor command that provides the current
information of WLAN hardware MAC and its
associated WLAN netdev interfaces.
Change-Id: I70ffbdf44ddc45fe606d0ad6e69f1b284cffc6fe
CRs-Fixed: 2194757
Add vendor wifi test config command attribute to send
addba request with user configuration and to set the
no ack policy.
Change-Id: I2afd62478961a774d16becba49889e855ecf7415
CRs-Fixed: 2196977
