qcacmn: Add subcmd QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP

In practice, some APs have interop issues with the DUT. This sub command
is used to transfer the AP info between the driver and user space. This
works both as a command and event. As a command, it configures the
stored list of APs from user space to firmware; as an event, it
indicates the AP info detected by the firmware to user space for
persistent storage. The attributes defined in enum
qca_vendor_attr_interop_issues_ap are used to deliver the parameters.

Change-Id: I18c8f5b9555573cf3d732ad14e83840f56a74d48
CRs-Fixed: 2441046

os_if/linux/qca_vendor.h

@@ -336,6 +336,14 @@
  *
  *	All the attributes used with this command are defined in
  *	enum qca_wlan_vendor_attr_beacon_reporting_params.
+ * @QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP: In practice, some aps have
+ *	interop issues with the DUT. This sub command is used to transfer the
+ *	ap info between driver and user space. This works both as a command
+ *	or event. As a command, it configs the stored list of aps from user
+ *	space to firmware; as an event, it indicates the ap info detected by
+ *	firmware to user space for persistent storage. The attributes defined
+ *	in enum qca_vendor_attr_interop_issues_ap are used to deliver the
+ *	parameters.
  */
 
 enum qca_nl80211_vendor_subcmds {
@@ -549,6 +557,7 @@ enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH = 178,
 	QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG = 179,
 	QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING = 180,
+	QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP = 181,
 };
 
 enum qca_wlan_vendor_tos {
@@ -885,6 +894,8 @@ enum qca_wlan_vendor_attr_get_station_info {
  *	vendor scan complete event  index
  * @QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX:
  *	update gateway parameters index
+ * @QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP_INDEX:
+ *	update aps info which has interop issues events index
  * @QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX: TSF response events index
  * @QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX:
  *      P2P listen offload index
@@ -962,6 +973,7 @@ enum qca_nl80211_vendor_subcmds_index {
 	QCA_NL80211_VENDOR_SUBCMD_SCAN_INDEX,
 	QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE_INDEX,
 	QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG_INDEX,
+	QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP_INDEX,
 #ifdef WLAN_FEATURE_TSF
 	QCA_NL80211_VENDOR_SUBCMD_TSF_INDEX,
 #endif
@@ -1762,6 +1774,49 @@ enum qca_wlan_vendor_attr_extscan_results {
 	QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_MAX =
 	QCA_WLAN_VENDOR_ATTR_EXTSCAN_RESULTS_AFTER_LAST - 1,
 };
+
+/**
+ * enum qca_vendor_interop_issues_ap_type - interop issues type
+ * This enum defines the valid set of values of interop issues type. These
+ * values are used by attribute %QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE.
+ *
+ * @QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS: the ap has power save interop issue
+ * when the STA's Qpower feature is enabled.
+ */
+enum qca_vendor_interop_issues_ap_type {
+	QCA_VENDOR_INTEROP_ISSUES_AP_INVALID = 0,
+	QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS = 1,
+};
+
+/**
+ * enum qca_vendor_attr_interop_issues_ap - attribute for ap with interop issues
+ * values are used by %QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID: invalid value
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE: interop issues type
+ * 32-bit unsigned value, The type defined in enum
+ * qca_vendor_interop_issues_ap_type are used.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST: aps' bssid container
+ * array of nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID attributes,
+ * it is present and mandatory for the command but is not used for
+ * the event since only a single BSSID is reported in an event.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID: ap's bssid
+ * 6-byte MAC address. It is used within the nested
+ * QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST attribute in command case
+ * and without such encapsulation in the event case.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST: last value
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX: max value
+ */
+enum qca_vendor_attr_interop_issues_ap {
+	QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID,
+	QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE,
+	QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST,
+	QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID,
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX =
+		QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST - 1
+};
 #endif
 
 #ifdef WLAN_FEATURE_LINK_LAYER_STATS