qcacmn: QCA vendor command support for TWT test configuration

Define new QCA vendor specific test config attributes to configure TWT.

Change-Id: I6386fba6aa794a6e3ecd50e6672810d7738876ef
CRs-Fixed: 2320867

os_if/linux/qca_vendor.h

@@ -6116,10 +6116,159 @@ enum qca_wlan_vendor_attr_wifi_test_config {
 	 */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_SUPP = 22,
 
+	/* Nested attribute values required to setup the TWT session.
+	 * enum qca_wlan_vendor_attr_twt_setup provides the necessary
+	 * information to set up the session. It contains broadcast flags,
+	 * set_up flags, trigger value, flow type, flow ID, wake interval
+	 * exponent, protection, target wake time, wake duration, wake interval
+	 * mantissa. These nested attributes are used to setup a host triggered
+	 * TWT session.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP = 23,
+
+	/* This nested attribute is used to terminate the current TWT session.
+	 * It does not currently carry any attributes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_TERMINATE = 24,
+
+	/* This nested attribute is used to suspend the current TWT session.
+	 * It does not currently carry any attributes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SUSPEND = 25,
+
+	/* Nested attribute values to indicate the request for resume.
+	 * This attribute is used to resume the TWT session.
+	 * enum qca_wlan_vendor_attr_twt_resume provides the necessary
+	 * parameters required to resume the TWT session.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1,
 };
 
+/**
+ * enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
+ * TWT (Target Wake Time) setup request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute.
+ * Disable (flag attribute not present) - Individual TWT
+ * Enable (flag attribute present) - Broadcast TWT.
+ * Individual means the session is between the STA and the AP.
+ * This session is established using a separate negotiation between
+ * STA and AP.
+ * Broadcast means the session is across multiple STAs and an AP. The
+ * configuration parameters are announced in Beacon frames by the AP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8).
+ * Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to
+ * specify the TWT request type
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute
+ * Enable (flag attribute present) - TWT with trigger support.
+ * Disable (flag attribute not present) - TWT without trigger support.
+ * Trigger means the AP will send the trigger frame to allow STA to send data.
+ * Without trigger, the STA will wait for the MU EDCA timer before
+ * transmitting the data.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8)
+ * 0 - Announced TWT - In this mode, STA may skip few service periods to
+ * save more power. If STA wants to wake up, it will send a PS-POLL/QoS
+ * NULL frame to AP.
+ * 1 - Unannounced TWT - The STA will wakeup during every SP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8)
+ * Flow ID is the unique identifier for each TWT session.
+ * Currently this is not required and dialog ID will be set to zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8)
+ * This attribute (exp) is used along with the mantissa to derive the
+ * wake interval using the following formula:
+ * pow(2,exp) = wake_intvl_us/wake_intvl_mantis
+ * Wake interval is the interval between 2 successive SP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute
+ * Enable (flag attribute present) - Protection required.
+ * Disable (flag attribute not present) - Protection not required.
+ * If protection is enabled, then the AP will use protection
+ * mechanism using RTS/CTS to self to reserve the airtime.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds. If
+ * this attribute is not provided, then the value will be set to zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32)
+ * This is the duration of the service period. The units are in TU.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32)
+ * This attribute is used to configure wake interval mantissa.
+ * The units are in TU.
+ */
+enum qca_wlan_vendor_attr_twt_setup {
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST = 1,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE = 2,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER = 3,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE = 4,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID = 5,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP = 6,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION = 7,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME = 8,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX =
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_resume: Represents attributes for
+ * TWT (Target Wake Time) resume request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds.
+ * If this attribute is not provided, then the value will be set to
+ * zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32)
+ * This attribute represents the next TWT subfield size.
+ */
+enum qca_wlan_vendor_attr_twt_resume {
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1,
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAX =
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_twt_setup_req_type - Required (u8)
+ * Represents the setup type being requested for TWT.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT
+ * parameters but relying on AP to fill the parameters during the negotiation.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST: STA will provide all the suggested
+ * values which the AP may accept or AP may provide alternative parameters
+ * which the STA may accept.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_DEMAND: STA is not willing to accept any
+ * alternate parameters than the requested ones.
+ */
+enum qca_wlan_vendor_twt_setup_req_type {
+	QCA_WLAN_VENDOR_TWT_SETUP_REQUEST = 1,
+	QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST = 2,
+	QCA_WLAN_VENDOR_TWT_SETUP_DEMAND = 3,
+};
+
 #endif