Function csr_get_phy_mode_from_bssDesc() no longer exists, but the
prototype is still present. Since it is obsolete, remove it.
Change-Id: Ib5a37e0468d3f6f2f5ed862c99d508aadb3afda0
CRs-Fixed: 2374838
The following channel-related fields in struct csr_roamstruct are
unused, so remove them:
- baseChannels
- channelList24
- channelList5G
- numChannelsEeprom
Change-Id: Ia44e386496e36ba15bcb1c39c6190d0331603903
CRs-Fixed: 2374836
Change I7994a9038d5bd094ce23bcd525ef8f5282974bfc ("qcacld-3.0: Apply
second part of LFR INIs changes") removed the logic that utilized the
csr_hi_rssi_scan_id enumerations. Since these are now unused, remove
the definition.
Change-Id: Ia72aabdfa672c8012f952967c7f67b1bc8024514
CRs-Fixed: 2374835
Change Ia0fa016b174ef4b50e2cc339e4e476ec65642dbf ("qcacld-3.0: Use dfs
component support") removed the logic that utilized the SapAllChnlList
in struct sap_context. Since this field is now obsolete, remove it,
along with the underlying tAll5GChannelList typedef that is also now
obsolete.
Change-Id: I5a07c44ca4138af5494d1a6f6e1d08158d244be2
CRs-Fixed: 2374834
The ap_table_max_size and ap_table_expiration_time fields in struct
sap_config are unused, so remove them.
Change-Id: I24aabe78b0da45c3dde19b444f94222eb874477d
CRs-Fixed: 2374831
Change I12a1d0cf37db22ff0bcb8165cb3f6b3847f8bf5b ("qcacld-3.0: Add
interface changes for supporting NAN data path") introduced struct
ndp_peer_node, but did not actually add code which uses it. Since
this struct is unused, remove it.
Change-Id: I36b333287de19e42855a596d25ba489e9cfb3241
CRs-Fixed: 2374293
Change I5828002d2363e01f63b0a643a0c59abd52bc4f19 ("qcacld-3.0:
NAN datapath cleanup") removed all code that called
lim_handle_ndp_event_message(), but inexplicably left behind an
inline stub function. Since the stub is unused, remove it.
Change-Id: I283c5e4ad8f285fc0452d8efbdc77960e420cf0b
CRs-Fixed: 2374292
LIM exposes a prototype for limGetBssidFromPkt(), but the actual
function no longer exists. Since this is an obsolete prototype,
remove it.
Change-Id: Idef628f4de18d4b4cc9a12c1cfb184eb2eadfdf1
CRs-Fixed: 2374291
LIM exposes a prototype for limWPSPBCTimeout(), but the actual
function no longer exists. Since this is an obsolete prototype,
remove it.
Change-Id: I31cbeae9dfa9fb561506bbd5ca16771ec9c566d8
CRs-Fixed: 2374290
The driver contains remnant support for Proprietary IEs that were
inherited from the original "Pre-n" version of the driver. Since
these IEs are no longer parsed or used, remove all references to them.
Change-Id: Iac7c3176682ce0054b7f06827fa6b6ec7be1e6a5
CRs-Fixed: 2374289
There are a large number of legacy byte swap APIs in utils_api.h that
are unused, so remove them.
Change-Id: I1adbb82820e4b325ed2843a87a201250978ce04c
CRs-Fixed: 2374286
Change I71de90d5fb88462e52148a434d43ea80c41cfe36 ("qcacld-3.0: Move
Channel convert and frame indication logic to lim_utils.c") removed
the last reference to typedef tSirMbMsgP2p. Since it is obsolete,
remove it.
Change-Id: I009aa479ffddeceebb3bd26af5ae48c32a43240c
CRs-Fixed: 2374285
Change Ia664f815759142e7f4ad8e648a469c63ddd003f5 ("qcacld-3.0:
Cleanup unused scan code") removed the last reference to
tSirBackgroundScanMode. Since it is now obsolete, remove it.
Change-Id: I2faab5487988b1941601f2befdb570ecab8651ed
CRs-Fixed: 2374282
Typedefs tInitScanParams and tFinishScanParams are unused, so remove
them, along with tSirScanEntry and tSirLinkTrafficCheck that is used
just by them.
Change-Id: I5f9c58236f8c5fe639c5b896a66b9dc290e54ab1
CRs-Fixed: 2374281
Change I38900a4c786b5ba5f31006e6e29332c081a565cf ("qcacld-3.0:
cleanup legacy scan code") removed the last reference to macro
HDD_SCAN_INACTIVITY_TIMEOUT. Since this macro is now unused,
remove it.
Change-Id: I9cb1370b6284a76c073594760bd857f666426e84
CRs-Fixed: 2374280
The timWaitCount field in tAniSirDph is initialized but never read.
Since it is ultimately unused, remove it.
Change-Id: I98795820caf8087f225b3835e531790d2d1f167e
CRs-Fixed: 2374279
The txRateFlags field in tSirIbssPeerInfoParams is initialized to zero
but is otherwise unused, so remove it.
Change-Id: I8efcb18869dfe1c5e2a42395bb40c281391b3bfa
CRs-Fixed: 2374278
Field ucPatternIdBitmap in tSirDelPeriodicTxPtrn serves no purpose, so
remove it.
Change-Id: I966983c3dea674e61ccf4d06473ea21448484a4c
CRs-Fixed: 2374277
The ucastDataRate field in tSirRateUpdateInd is initialized, but is
otherwise not used, so remove it. And the ucastDataRateTxFlag field is
never referenced, so remove it as well.
Change-Id: I1df8e5ec32d8ebb1d1e1f53c83bec45fbb86bb4e
CRs-Fixed: 2374276
Field ucSecEnabled in struct sap_context is initialized, but is
otherwise unused, so remove it.
Change-Id: I4b947be54d86e0e7e272b97427efd7acb4658fe6
CRs-Fixed: 2374275
The ownSsid and ownSsidLen fields in struct sap_context are unused, so
remove them.
Change-Id: I405f0c7c47e163a962bc3db19d88d5b69ca95ac7
CRs-Fixed: 2374274
Add dot11mode related cfg items in mlme cfg, and replace
old WNI dot11 modes with new MLME DOT11 mode enums
Change-Id: I6e866959f440ae781432c8aaa724b229c0874856
CRs-Fixed: 2362540
Add cdp api to check if tx desc pool available descriptor
threshold has reached.
Change-Id: I12cc38b56a68ca7ee8f4560677fcdabccb38928b
CRs-Fixed: 2369244
Refactor the prints for rx management frames. Do not print rx
frames in wma_form_rx_packet, as txrx module take care of it.
Change-Id: I52403c9dd32919507af13782dc838ff8076070cd
CRs-Fixed: 2375675
Just like the legacy APF commands, dump the contents of the
APF instructions/data as it is read or written by upper
layer using the new APFv3 vendor commands. This is helpful
for debugging purposes.
Change-Id: I24725b5b8431fcaa573953187f8412e4f4d0b510
CRs-Fixed: 2375362
lim.dfschannelList.timeStamp is a array of
SIR_MAX_24G_5G_CHANNEL_RANGE(166). In some countries channel greater
than 165 are allowed and thus if channel is greater than 165 driver
access out of bound memory which lead to corruption of
lim.sme_msg_callback.
lim.dfschannelList.timeStamp is used to convert DFS channels to
active, which is used for host handled scan to decide if active
scan can be done on DFS channel. Scan now been handled in firmware
this logic is unused and can be removed.
Change-Id: Ib301fa70a6b7ed99f3ecacbf344dd9e821079149
CRs-Fixed: 2374977
Currently power save enable request user command is not
processed if the station is not in connected state and the
configuration is not saved hence station do not enter into
power save mode until the user command is issued after
connection.
Save the power save user configuration setting if the station
is not connected and start the auto power save timer for one
second timeout value after the station is connected to enable
the power save.
Change-Id: I6e17a8e989ca731ca008dcb46ca79c3a181ddff0
CRs-Fixed: 2371045
Change I4fdbf041b53b5f1606d324714f01088742a9307f ("qcacld-3.0:
Modify Kbuild to add new beacon header file") added new file
wmi_unified_bcn_api.c to Kbuild with flag CONFIG_WMI_BCN_OFFLOAD.
Add this flag to all dependent APIs.
Change-Id: Id3f77434179b739d5563b490d25b1c1386e1831f
CRs-Fixed: 2374758
Add protective check in driver to handle NUD events only if
subnet gateway is configured.
Change-Id: I5142e4d50490ea4726f337e19c8282359d23423d
CRs-Fixed: 2373552
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal update the signature of the following function
and add that function to the vtable:
- wlan_hdd_cfg80211_wifi_set_rx_blocksize()
Note that with this change all of the attribute handling in
__wlan_hdd_cfg80211_wifi_configuration_set() has been relocated to the
vtables. The measured cyclematic complexity was reduced from 103 to 6.
Change-Id: If5c3cfea7107f95c07867895a0bc7cc5d13fc7ac
CRs-Fixed: 2371594
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal update the signature of the following function
and add that function to the vtable:
- wlan_hdd_cfg80211_wifi_set_reorder_timeout()
Change-Id: Ia9c160eb81358b91feecb35b1cb8c097f90979cc
CRs-Fixed: 2371593
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal refactor the following interdependent attribute
handling into a separate function and add that function to the vtable:
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_MGMT_SNR_WEIGHT
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_DATA_SNR_WEIGHT
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ACK_SNR_WEIGHT
Change-Id: I1bd98a7c78b77791eb7737a928f2a22ced1af3c6
CRs-Fixed: 2371592
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal refactor the following interdependent attribute
handling into a separate function and add that function to the vtable:
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_STAY_PERIOD
Change-Id: I13f76951f8f8451d70e1cc64f0116a8b6de163d0
CRs-Fixed: 2371591
