The list APIs only provides the current size of the list.
In certain cases, to be able to decide if the queue is full
we can compare the current size with the max size of the list
and not attempt to add to the list at all.
Change-Id: Ic0844ae9fccd8bcc9603d31c41692680966e1753
CRs-Fixed:2304508
Remove SW WAR in rawmode for qca8074v2 target. Added flag in
vdev structure which will be filled during vdev attach time.
Based on the flag war is applied.
Change-Id: Id91d6359b0a575b1f2b1222e56ac93a0e08a3c73
CRs-Fixed: 2296584
To avoid excessive logging to console, control the log rate when
RX data peer is invalid in function dp_rx_err_deliver, use API
QDF_TRACE_ERROR_RL instead of original QDF_TRACE.
CRs-Fixed: 2300774
Change-Id: If1bf3fd93801e0ef37c7fdb1a32cda16aa429464
Add a flag packet_buff_pool in skb->cb to indicate
HTT packet pool buffer to use in case of HTT Rx ring
low memory scenario.
Set this flag for the buffers allocated for HTT packet pool.
Change-Id: I8e7c823f09aa8b7f686ee52f98f0984e542ff9fa
CRs-Fixed: 2301887
Attach action tables with 2x2+1x1 DBS hw
modes, and select the table based on user
dbs preference INI setting.
Change-Id: If1fc79ce9a774fbf1ca08d09546679746ba1c4a3
CRs-Fixed: 2258919
__pm_wakeup_event() was superseded in Linux kernel 4.12 by
pm_wakup_ws_event(). Add conditional compilation to use the new API as
appropriate.
Change-Id: I8f6ceb6de24e1ffcc909f9417595d29d50968ebc
CRs-Fixed: 2306603
Add API to query qdf debugfs buffer overflow.
Add support to dump log in different block sizes.
Change-Id: I3d5b63ef2f9b0eeb4df20dbb93a76f10ed10f556
CRs-Fixed: 2307897
Maximum among primary CAC timeout and secondary timeout was used to
determime preCAC timeout. Due to this the non-weather radar channels
were also using 600sec as preCAC timeout.
To fix this, CAC on primary channel is done, then use secondary
preCAC timeout.
CRs-fixed: 2303360
Change-Id: If229957d8778a0a7794650e2908da8353fb9e090
Some of the macro names defined in qca8074v1, are defined with
a slightly different name in qca8074v2, and few macros have the
same name in both headers but are defined with different values.
Fixed the same.
Change-Id: I5e948baf5326d1d8fdfa2bd7ee8aa072c710d17c
WORLD_60 is default WORLD mode. Remove channel 12 from WORLD mode. Also
fix TX power in WORLD mode for channels 12/13.
Change-Id: I030f7d07355031e9b791aec3a1edc6a3fb44651a
CRs-Fixed: 2302910
The correct alpha2 value for Argentina is AR and not AR1.
Fix it. Also add FCC5_FCCA regdomain to the regdomain table.
Change-Id: If06ca577b32602620d30ab3c5b9182ae7ab2c44a
CRs-Fixed: 2304785
There are many instances where outside DP peer reference is
used. This may lead to potential invalid access as the peer
reference used outside DP can be deleted in peer unmap. So
implement DP ops to give peer handle by incrementing peer ref
count and also to decrement the peer ref count.
Change-Id: I54b131e4ce4fde888e5d0e69f81c6da8633e2787
CRs-Fixed: 2307529
This API makes the reuse of sk_buff possible, by resetting
it with the reserve and align arguments passed by the caller.
This brings back the skb to the original state as
returned by qdf_nbuf_alloc without allocating the skb again.
Change-Id: Idefcbd4be9fae5d140805d55207dec01bdc90237
CRs-Fixed: 2301899
Remove DP_INTR_POLL FLAG as polling is now handled runtime using
hif_is_polled_mode_enabled. This is needed as 8074 works on interrupts
whereas 6290 is still working on polling mode
Change-Id: I0e7fdc338d462735dc216c929b1b5a99dc984435
Regular allocs usually result in allocation of size aligned to
slab boundary resulting in more memory than the requested. Use
multi-page allocation to avoid allocation of more memory than
requested.
Change-Id: Id6562f2fe419179e27206ff5b1d543090b931607
CRs-Fixed: 2294213
The minimal size of RSN ie data size is
2 (only contain version field).
The original 3 will cause driver identify
such AP beacon/probe rsp as invalid and
do not connect to it.
Change-Id: Idceaf936cbd0ca448f82d9594b35ca346c6513d4
CRs-Fixed: 2294094
Read AC ID from the firmware event(ATF) received.
The AC ID sent by the firmware is used to (un)block
tx traffic with ATF enabled
Change-Id: I4efedea26495b262f1c55fab3a1fc2824e1509f7
CRs-Fixed: 2306297
Add more debug IDs to narrow down further funciton who is holding peer
reference. Reduce the peer debug dump log level to avoid side effects of
console logging.
Change-Id: I9820c72bcde8a0c2b0e779cf322e1133ef8a43e6
CRs-Fixed: 2303069
It won't indicate roc event to up layer for idle roc request, which
casue p2p listen command pending.
Change-Id: I7a1c3c83411c63b790db1500a283d062dd87d63b
CRs-Fixed: 2298546
1. Service ready ext includes a parameter for max
BSSID indicator.
2. Beacon template includes MBSSID IE offset.
3. Vdev create and up cmds include more parameters.
Change-Id: I71214eacdaa886725b7ea8f61db3a743ba6597e9
CRs-Fixed: 2306638
In WORLD mode, there can be urgency to discover the current country since
WORLD mode restricts the channel and TX power availability. Therefore,
enhance 11d state machine to enable 11d in world mode. Use INI
configuration parameter enable_11d_in_world_mode to decide whether to
enable 11d in world mode automatically.
CRs-Fixed: 2289358
Change-Id: I8a4e1f6c74acb5ac1faec8f98840bf66c3d9a3f7
Currently gi value was not considered for ratekbps calculation
if sgi is enabled, include gi parameter for ratekbps calculation
Change-Id: Idd8b36375493c26f22f2f4f0c7ae922df37e65a1
1) This reverts commit
I7025fdd7540f47bb4d3f95ef6d9f2ef92af5f1f1
2) Reverted changes have been taken care through:
Idd7617782e71ee187eef7fcb3523c05b49f82094
CRs-Fixed: 2300055
Change-Id: Icc47ded9a585e356b7eae1ad53ffea6668510308
Change a few memory allocations of the DFS module from dynamic to
statically allocated memory from .bss segment to avoid any possible
runtime memory allocation failure because of the requested contiguous
memory of a large size.
The static allocation will not work for Multiple RADIO based boards as
it will use the same memory for all the radios.
Change-Id: I93b30a0a3f2f7d91466c930c12e9fae60699605a
CRs-Fixed: 2302097
Apstats display last tx rate for unicast as well as for multicast
hence we are adding support for last tx rate for multicast
Change-Id: I94cdcbb9c156ecaa4b7a5407a0f0c00dfa9786e9
Add FTM flags to enable/disable FTM and enable NL80211 only, enable TX99
only or both.
Change-Id: I18bbbadd65d23221dc4d739e05235f4d81c12043
CRs-Fixed: 2240572
It won't report err status since if idr_find return NULL, which cause
unnecessary process with NULL pointer.
Change-Id: I5813ddca11172f75fb73c9530e003c50e55beba2
CRs-Fixed: 2275848
Tie increment and decrement PM usage count to descriptor allocation
and free instead of HW enqueue and TX completion since allocation
and free will be the most accurate places to track if the packet
has been sent or not.
Change-Id: Ia61c5bb26386d20590e87149d0fe88dba02d0fb7
CRs-fixed: 2302214
