Add macros to set and get BSS color value and the BSS Color
disable bit values. These macros are used to construct the value
to send to the WMI BSS Color vdev param with BSS color and BSS color
disable status embedded.
Change-Id: Id0721a1a5d66fff5d2c50708aeefb5e0ec03e999
CRs-fixed: 2186897
Deprecate enum wmi_dwelltime_adaptive_mode and use enum
scan_dwelltime_adaptive_mode defined in scan component.
Change-Id: I9c33b852172d9208fb8440c6dc71a12aefd717da
CRs-Fixed: 2213074
WMI_VDEV_PARAM_AUTORATE_MISC_CFG is introduced to set
HE GI LTF combinations in case of autorate adaptation.
Add support for the same in host side wmi files.
Change-Id: Idf567d771539b17e669ddab8b85092e3cbf9d3c8
CRs-fixed: 2204393
There are instances of use of older A_UINT/A_INT.
Replace all such instances with the qdf u_int*_t/int*_t.
Change-Id: I7ce29b03f29a0d1a0cf87cfd3c846f4694da4c2a
CR's-Fixed: 2210869
IPA module has been moved to CLD component under the converged
driver model. Point the wmi API's and structures to the newly
defined files.
Change-Id: I96205f7cc18dbea1c05a5f6314490ea6b3dd75fd
CRs-Fixed: 2180176
Modify arguments of wmi_unified_attach to use struct to
send attach params instead of individual params. Add max
WMI commands as a param. Based on requirement MAX WMI
commands value is different. In case of AP that supports
16 VAPs and more than 512 clients, 1024 commands is not
enough. Use this param to configure this value based on
the requirement.
Change-Id: I4e778475481e509051dfbac70980614b644e1b4a
CRs-fixed: 2034438
The WMI_MAX_CMDS macro was defined in wmi_unified_priv.h, move it
to wmi_unified_param.h so that it can be used to set
wmi_unified_attach_params.
Change-Id: I33aaa3c1fb189c7ef660ccbc5262afd0a1ee258b
Firmware recently exposed two new resource config fields,
num_packet_filters, and num_max_sta_vdevs. Add these fields to the
host-side resource config struct so appropriate values can be populated
and communicated to firmware.
Change-Id: I951ba6ac929c38c2d78af6705f4922b62fc7d3a1
CRs-Fixed: 2201876
In WMI struct target_resource_config is obsolete and outdated.
Correct resource config struct is target_resource_config hence
remove the obsolete and outdated struct target_resource_config.
Change-Id: I23aeb46854008dabad4ece953c6eb2c151bedac0
CRs-Fixed: 2202520
Extend wmi interface command to support other
connectivity check stats(ICMPv4 and tcp).
Change-Id: I881aaeab6e3e1f36b7153630b87a07019660d896
CRs-Fixed: 2168412
Add function for extract_nfcal_power_ev_param and
register wmi_pdev_nfcal_power_all_channels_event_id event
to support noise floor in HK.
Change-Id: I6eef823b507be94c65df026664244eec7fc07e24
CRs-Fixed: 2157972
qcacld-2.0 to qcacmn propagation
Adds qdf time api to get time of the day in millisec
Also send host timestamp to firmware, so that firmware can print the
logs timestamp in sync with host via the wmi interface,with
api wmi_send_time_stamp_sync_cmd_tlv()
Change-Id: Id6acfc5227fdca2fbf8d266998fdfc4046adc5f4
CRs-Fixed: 2193978
Add command support to not send ADDBA REQs.
The corresponding WMI VDEV param ID to set the
VDEV param has been added.
Change-Id: Id53f8101a61ccc0aba2a9a6735d1c6942ba3592d
CRs-fixed: 2188560
Firmware will use this configuration to enable/disable the
CCK transmission. By default, the CCK Tx is enabled.
CRs-Fixed: 2191524
Change-Id: I165c3ea10ea3734fc81e7d25fe8ad676afd1b2c1
Added extender service support for obss and obss color
Collision offload support.
Change-Id: Ifd249b3bbf4510297f15beb33df13d6c4f9d7d0e
CRs-Fixed: 2185238
Current Spectral module uses qdf_print. To improve the control over
logging, use module level logging
CRs-Fixed: 2165341
Change-Id: I205991347453c4dcc424ba1958e309b7c5fb71a0
As part of converged architecture wmi_service_enable is converged
and should be used instead of WMI_IS_SERVICE_AVAILABLE. The events
also need to be defined as part of array for mapping to converged
event id's.
Change-Id: I9ab342a5cf6e665a3eb90eeef6d10bf3c145049d
CRs-Fixed: 2186338
Change WMI initialization sequence to support WMI modularization.
TLV and Non-TLV modules calls WMI module registration based on target type.
WMI attach will call respective attach routines based on registration.
Change-Id: Id56446f491d129758537913d2d5d6633f8dec918
CRs-Fixed: 2179854
Remove dependency on WMA layer for green AP component by registering
green AP events through target_if layer.
Change-Id: I8fe9079c6ba6b23cd5f1d98a7d1b333fde31f19b
CRs-Fixed: 2178143
command:-
1. "iwpriv athx s_txpow param1 param2"
2. "iwpriv athx g_txpow param1"
param1 = frame_type<<8+frame_subtype param2 is power_value
if subtype == 0xff means set all subtype of that frame type
Change-Id: I8c68e1ca6a5829a3f0cf01b2c32c3332e1010243
CRs-Fixed: 2175241
Increase the maximum value of unit test arguments to 100 to include
support DL OFDMA RU allocations for testing / debug.
Change-Id: I33ed8d53931e33cc00069653ea38b543339203c0
CRs-Fixed: 2175616
Currently WMI handler for WMI_PHYERR_EVENTID is used to handle DFS and
spectral scan phy errors; but Rome FW still uses WMI_PHYERR_EVENTID
and WMI_DFS_RADAR_EVENTID and does not have spectral scan phy errors.
Restore WMI_PHYERR_EVENTID and WMI_DFS_RADAR_EVENTID as Rome FW
requirement.
Change-Id: I23ca4ff6c9be0ba6a0f21f0e0ef9161b1942f629
CRs-Fixed: 2160431
Add WMI support for enabling/disabling the FW scheduler APIs and stats
per peer for MU and OFDMA
Change-Id: I185ca6ff5b564fc9b83007fd4e37da82b5c9976e
CRs-Fixed: 2169179
Add WMI support to set SU and MU TX beamforming sounding interval on
host driver in addition to enabling/disabling the above ability.
Change-Id: Ic3ea109e47c0df13db2c919bbcdf5fc7d6164698
CRs-Fixed: 2169176
Added a WMI command to add and del peer from the list
of non associated clients for which the RSSI stats
need to be populated
Also added event handler to extract the rssi stats
from the WMI event
Change-Id: I9880c74798c13a52e1498b81735ad78f86fa41b8
CRs-Fixed: 2148773
Recently change "qcacmn: Add SAR power limit configuration"
(Change-Id: I0a214a2af780e9dd8c381c4e9eaa7d8cab6ef853) added the
ability to dynamically configure Specific Absorption Rate (SAR) power
limits. Now add the ability to retrieve the current active power
limits.
Change-Id: I7a6071dee71300daa3a217780ff3523604a11795
CRs-Fixed: 2161451
Add new WMI EVENT, SW FILS Discovery Alert Event, to get
firmware trigger to transmit FILS Discovery Frames.
Add WMI command to send FD frame buffer to firwmare.
Add WMI command to set FD period interval in mili seconds.
Change-Id: I8cb6279ec4431b9236bd32c548228a0dc6598664
CRs-Fixed: 2118098
Add ini to configure BTM offload configuration
which is sent to firmware as part of RSO start
via wmi btm config cmd.
Change-Id: I69c792705b208014af8f1878f7645d957dde6c06
CRs-Fixed: 2105112
DISA feature has been moved to a CLD component under the converged
driver model. Point the wmi API's and structures to the newly defined
files. Define new API's to extract parameters from event buffer.
Change-Id: Ia47d3682217e7ce9c021bb2db8319483c881b3b2
CRs-Fixed: 2161963
Add Objmgr ID and related definitions to support the newly
defined DISA component in CLD.
Change-Id: Ibbe5db39c01dae94cad5af5f4dccd2611c5b06d4
CRs-Fixed: 2159599
Refactor NAN target_if to make it wmi-type agnostic. Specifically
do not access wmi structures in NAN target_if. All the access to
wmi structures should happen in tlv and non-tlv specific wmi files.
Change-Id: I944b678fc501723d7cd26c9b21c4cc6ddb7fda4e
CRs-Fixed: 2159876
Add host support to enable setting MSDUQ depth parameters per
TID per peer.
Parameters include MAC Address, TID number, update mask and
Q depth threshold value.
CRs-Fixed: 2162460
Change-Id: Ie947fd599278a04e13d6aa6c89f840187dbf17fa
Direct Buffer Receive provides the driver with a mechanism by which target
can transfer information directly into host memory via DMA.
Add support for the following service/events/commands -
1. WMI_SERVICE_SUPPORT_DMA
2. WMI_DMA_CAPABILITIES as part of WMI_SERVICE_READY_EXT_EVENTID
3. WMI_PDEV_DMA_RING_CFG_REQ_CMDID
4. WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID
5. WMI_DMA_BUF_RELEASE_ENTRY
Change-Id: I3949026b4542565c49bb538b9545ea607690c793
CRs-Fixed: 2158304
Add append bit in scan channel list command. If append bit
is set, new channels will be appended to existing channel
list else existing channel list will be over written
by new channel list.
Change-Id: I0b1ecd2b809aafe6e524a05aacd5b14c80640556
CRs-Fixed: 2159802
wmi_do_wow_disable_ack_event_id was named by mistake, rename it where
use it as wmi_d0_wow_disable_ack_event_id.
Change-Id: Ic11cb2a260b2ac65d0324d950d043988a7da6657
CRs-Fixed: 2160870
The datatype of wd_msg_type_id was uint16_t which truncates the
upper bytes of msg id.
Changing the datatype of wd_msg_type_id from uint16_t to uint32_t.
Change-Id: I49b5eefd878660f6ba3d0b7da451df99661c59df
