Fix Enhanced Bangradar to add only the subchannels into NOL
based on its parameters during call, and not the entire set
of current subchannels.
Current implementation of enhanced bangradar sets bangradar entry,
in DFS, to 1. Since bangradar does not use subchannel marking,
enhanced bangradar did not work either.
Introduce a new boolean entry in DFS structure that does not follow
bangradar and does subchannel marking.
Change-Id: Idf44b80a6cae3f1c8a3c7b430a233e3fd29ba0c5
CRs-Fixed: 2368100
The unused CE11 is accessed in ce_construct_shadow_config_srng,
but not allocated.
Fix this by allocating memory for CE11 in the global structure
CRs-Fixed: 2365374
Change-Id: Iefd9129e486891e27f5964eecc1a2d1efc080d06
As part of supporting NAN DBS, new WMI TLVs are defined so
that Host can maintain the status of NAN Discovery in sync
with the Firmware. Move the older handlers into the NAN
related files. Also add modules to extract information from
the new TLV's and fill up the event parameters to pass
them to the NAN component. add support for explicitly
disabling NAN due to concurrencies.
Add modules to handle and extract the info from NAN events.
Change-Id: Ic03baaaef45106353c211a813e11e33a90cd41ca
CRs-Fixed: 2338059
The radar affected subchannels list that is sent along with RCSA
was not built properly due to unreliable (contained 0s) subchannels
list provided by subchannel marking function.
The implementation used a single iterated loop to traverse through the
subchannel array elements, not counting 0s as possible inputs.
Search through each element of the list to find if the subchannel
is present and break if successful.
Change-Id: I5cd5ce7b6a334247c7d8733ee8433f957480c1dd
CRs-Fixed: 2364640
As part of the NAN Discovery DBS support, new vendor command
- QCA_NL80211_VENDOR_SUBCMD_NAN_EXT - has been defined that
can carry the binary blob encapsulated within an attribute
and can carry additional attributes to enhance the NAN command
interface. Add the related definitions to support this command.
Add definitions to support the new NAN EXT vendor command.
Change-Id: I83c12c7512066434f8974619e1d953ac78d3a40d
CRs-Fixed: 2339032
The cfg tool command to enable/disable subchannel
marking called a WMI to be sent to FW without checking
if dfs is offloaded to FW.
This added fail prints in log for partial offload and direct
attach even if subchannel marking was set.
Fix the cfg command to send a WMI to FW only if dfs is offloaded.
Change-Id: Ifae574ed6aeb49c4058d89374fdcc81b8d43a5bc
CRs-Fixed: 2334258
Add support for GRO functionality for TCP packets.
- Pass GRO config to DP layer as a part of dp_update_config_parameters
- Add API to read the number of active RX contexts from DP layer
cdp_get_num_rx_contexts
- Fill GRO info into skb->cb from rx_tlv during dp_rx_process
CRs-Fixed: 2346995
Change-Id: I1c143d8ce2c7522ba2c76142fb6cc82193df5608
-Add rate limit macros
-Change existing dp_info to QDF_TRACE_LEVEL_INFO_HIGH so that the dp_info
prints donot log to kmsg.
CRs-Fixed: 2346995
Change-Id: If00ece6dda3045bc9fe2232add463b76f7e887d1
Change with fix memory leak observed in case where
smart monitor is enabled and monitor direct bit is not set
Change-Id: Ib556482b9067dbd7418cbe226a19bbbd5844a075
In dp_rx_mon_status_buffers_replenish after replenish of all
mon status ring rx buffers there is log in which function
local desc list is accessed. But after successful replenish of
all the available free desc, free desc list will be NULL. So
accessing the free desc list in the debug log leads to NULL
pointer dereference. In this change remove the debug log as
before that enough logging is in place to check how many buffers
are replenished.
Change-Id: I306aa52f6f25d9b43afb8548b8c03467aa9f27de
CRs-Fixed: 2366585
During dp_rx_pdev_attach and dp_rx_pdev_mon_buf_attach we are allocating
three times as many rx descriptors as there are entries in the ring for
AP usecase. This is not needed for MCL and may need to kmalloc
failures for allocating that much contiguous memory
Allocate only as many RX descriptors as there are ring entries for MCL
usecase.
Change-Id: I8b559a85c3899bcbdc520e71ba5da409314db160
CRs-Fixed: 2342957
1. Reduce the log level for every buffer received
from firmware
2. Set the default pktlog buffer size to 10MB.
Change-Id: Iad8827084579592fcfa69056dcfc9d57095151e7
CRs-Fixed: 2364380
Current driver doesn't clean-up all the peers because the TARGET
state is not marked as reset and due to which nobody is there to
mimic fake peer unmap events to reduce the reference count.
Also, there is no peer delete API being called as well in case of SSR.
Identify the TARGET state in-case of SSR by calling HDD callback
and mimic the unmap events and call peer delete API as well.
CRs-Fixed: 2350285
Change-Id: I878b7a15701c01ac9ef80010086f7e868a631a74
There were minor review comments for the change
for adding activation reason also to activation sb
which was not addressed in the changeset
since it had all the necessaary approvals and it
was in path for merge.
Addressed all the comments as part of this change.
Change-Id: I8035adf2dce152e60eef1494aa7f100c2d567f41
CRs-Fixed: 2361327
Add field for activation reason to serialization cmd structure
Also modified the other boolean fields to a bit field for optimization
The new field added to serialization command structure will be used
to update the activation reason about how the command was activated,
either directly from active queue or as part of movement of
pending to active queue.
Change-Id: I8a1da79b7ef60e8d8a739ae2f265418418e2c859
CRs-Fixed: 2361327
Add a new API to update serialization timer value for a
give command in the active queue.
Change-Id: I725a35822e881facd9e2f4a51e41ea5ee8d6bbd8
CRs-Fixed: 2352317
Add API to peek into the vdev active queue
and return the command type present in the
active queue of a given vdev
Change-Id: I4a4dc419f4a51645cc7e611ffb7053a8c8240381
CRs-Fixed: 2354133
Add new attribute to the serialization command
structure to disable the vdev queues on queuing
the given command.
The serialization command attribute to disable queues
is only used for non scan commands.
After the queues are disabled, new serialization requests
applicable for the given vdev will not be allowed.
Change-Id: I29e6330413e9b16c7d3e96ad0eb004515061db88
CRs-Fixed: 2349901
With the current implementation, the removal of a command
is allowed before the activation cb returns.
So if a command is removed before the activation returns,
and the activation returns failure, we attempt to access
the command buffer after the cmd is removed happen.
This is now protected by a new flag where if a removal is
attempted before a commands activation cb is completed
the removal request just marks the CMD_MARKED_FOR_REMOVAL
flag and when the activation cb returns, we check if a
commands removal had been attempted. If yes, remove the command
from the active queue.
Change-Id: I53af6706010b50640ea7248085e9fc85908056fa
CRs-Fixed: 2356813
The current implementation was not checking for pending
queue status before adding command to pending queue.
This was causing an issue, when, after removal of an active
command, we were preepmted and a new request came, it made
it to the active queue. Now when the previous thread resumed,
and we attempted to move pending to active, it failed.
Added the following new checks:
1. When adding command to active queue, make sure there is no
commands in the pending queue
2. When moving from pending to active, make sure it is allowed
to add commands to the active queue.
Change-Id: Ief16c22f6f7e2cdc105e24f164e5891bfe806662
CRs-Fixed: 2356719
In existing code, 132 bytes of OTA mgmt. and control payload is
provided to upper layers by subscribing to packet header TLV.
The requirement in M-copy mode though is to get complete payload for
mgmt. and ctrl. packets. Add change to configure monitor destination
ring and add mgmt. and ctrl. packet filter to receive full mgmt. and
ctrl. packets.
Change-Id: I0014837b51cac6f0143dcc5cb624ea2086cf4486
CRs-Fixed: 2256159
Add support to choose the hw_mode_id from FW supported modes. Preferred
mode will be selected if it is not configured in ini params. It is
selected based on the precedence as per capabilities supported by the
mode. For eg., if FW supports DBS and DBS_SBS, DBS_SBS is selected as it
supports three radio compared to DBS's two radio.
This can be overridden by user by setting proper hw_mode_id in ini file.
Change-Id: I162c3a66182882890c416a68f7f64d5149b8f1e5
CRs-Fixed: 2361280
The IPv6 address format allows compression of _one_ or more zero hextets
using "::". However, the current implementation accepts _zero_ or more
zero hextets as valid. Adjust the minimum required hextets for a zero
compression to 1 from 0.
Change-Id: Ibdf406b04bbdc44d4a28fafa6179c104285c915c
CRs-Fixed: 2362739
Currently there is only tso segment and tso number segment
descriptor free operation when tso preparation failed, do dma
unmap for each segment as well.
Change-Id: I9a507f27341877dc062528ce77e02970d16aa098
CRs-Fixed: 2347279
Currently there is no converged wmi_service enum for the
WMI_SERVICE_VDEV_LATENCY_CONFIG.
Add wmi_service_vdev_latency_config as the converged enum.
Change-Id: I90d54ccd507b4267cd7310b4e6e5b1473c7dc41c
CRs-Fixed: 2366187
The original definition of struct wmi_unified_pmk_cache had several
anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
Change If4be27111c604c16ea437aa654210cdff28220a7 ("qcacmn: Refine
struct wmi_unified_pmk_cache (phase 1)") completely addressed the
first issue, and as the first phase of fixing the second issue it
replaced the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
qca-wifi-host_cmn change Ie8cc453751b95c332e3df32794506a4bd3c324ad
("qcacmn: Refine struct wmi_unified_pmk_cache (phase 2)") and
qcacld-3.0 change Ief4bcb819cb3c842adb74904f2cb2483476eaeb9
("qcacld-3.0: Use the refined struct wmi_unified_pmk_cache") replaced
all references to session_id with references to vdev_id.
For phase 3 remove the anonymous union introduced in phase 1, leaving
just the vdev_id field.
Change-Id: Ic5a274b9e2e8e603eef801a9d6422f55829f9735
CRs-Fixed: 2363432
The original definition of struct wmi_unified_pmk_cache had several
anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
Change If4be27111c604c16ea437aa654210cdff28220a7 ("qcacmn: Refine
struct wmi_unified_pmk_cache (phase 1)") completely addressed the
first issue, and as the first phase of fixing the second issue it
replaced the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
For phase 2 replace the reference to session_id with a reference to
vdev_id in send_set_del_pmkid_cache_cmd_tlv().
Change-Id: Ie8cc453751b95c332e3df32794506a4bd3c324ad
CRs-Fixed: 2363431
Add support to dump only last n dpt records of debug fs
dump_set_dpt_logs file.
Change-Id: Ic6418803d53cc2abbfc200f62df2a24c3bc55d54
CRs-Fixed: 2362523
Add WMI support to send action oui DISABLE_AGGRESSIVE_TX
to firmware to disable some of aggressive tx features for peer mac
when DUT is operating in softap mode.
Aggressive TX features disabled are SIFS bursting, assist and support of
more than 32 frames in AMPDU.
Change-Id: Iaad1917a6a4897cef4d65a8951d3d1f207a9167b
CRs-Fixed: 2364937
The current definition of struct wmi_unified_pmk_cache has the
following anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
To fix the first issue just remove the tlv_header field since it isn't
used. To fix the second issue takes a phased approach. For phase 1
replace the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
Subsequent phases will replace session_id references with vdev_id
references, and then remove the union, leaving just the vdev_id field.
Change-Id: If4be27111c604c16ea437aa654210cdff28220a7
CRs-Fixed: 2363430
Add support for smart monitor feature on HKv2.
For HKv2, NAC filtering is done by HW and NAC is
programmed directly in the AST table. The NAC entries
in AST table have monitor direct bit set and this
is obtained by host via monitor status ring.
host subscribes for packet header in MD packets.
To these filtered packets radiotap header is added
and delivered to the stack.
Change-Id: I123f986531943e376ac5c492540e01f0b03348c4
Add APIs for t(ree) alloc(ated) memory management.
These APIs allocate memory like malloc, but track those allocations via
a parent-child relationship, or tree. If the parent is freed while it
still has children, a panic will be triggered. This effectively gives
you the ability to limit the lifetime of an allocation by ensuring the
child allocation lifetime will be strictly less than the parent
allocation lifetime.
Change-Id: I6308c96061e125b2e5a9c424ec2d2298c1c503ab
CRs-Fixed: 2359469
Add a thin wrapper in QDF around the kernel hashtable implementation.
Additionally, add basic unit tests for these APIs.
Change-Id: I07999e5fc8116e67b3850b866ced20af64342055
CRs-Fixed: 2359335
TDLS component used in CLD only and needn't in hostcmn. So there
is requirement to move it from hostcmn to CLD. This change removes
policy mgr related files/codes from hostcmn.
Change-Id: Ifeaf1447e74f83a17072d08c4a0ff62a13e91518
CRs-Fixed: 2361584
For MCL function dp_rx_process_invalid_peer, there is corner case the
nbuf is not data and freed, but invalid_peer_head_msdu pointe to the
same nbuf in pdev is not reset to NULL, then invalid_peer_head_msdu is
reused again.
Reset invalid peer msdu list to NULL when nbuf is freed.
Change-Id: I73058afe9656c34971ea083faa19ef9d90b7f747
CRs-Fixed: 2356531
During SSR test, TX skb sent to target will not get TX completion,
so skb unmap and free is missed. later when driver is unloaded,
nbuf unmap leak is detected then panic happened.
Take care to unmap and free the corresponding skb of pending TX
descriptor during vdev detach.
Change-Id: I9f4e6443682097ec76632c96a0188ffa2c1a5fcc
CRs-Fixed: 2347770
Pass vdev mac-addr and vdev-mode, instead of vdev-id.
The vdev-id that was passed earlier, was used to get
the mac-addr and vdev-mode from the vdev structure.
But there are cases when this vdev structure may be
freed, when this API is called.
So pass the mac-addr and vdev-mode from the dp structures.
Change-Id: I2148e7ecef433f4363385eeaec2e18f3ec131ab8
CRs-Fixed: 2356315
Policy mgr component used in CLD only and needn't in hostcmn. So there
is requirement to move policy mgr component from hostcmn to cld. This
change removes policy mgr related files/codes from hostcmn.
Change-Id: Ie774d526cd4aa91b16afe6e01919141b570324c4
CRs-Fixed: 2361566
Link descriptors should be returned to WBM release ring if
fragments are not reinjected due to defrag errors.
Change-Id: Ia37db9f195f6848092918cf7cc221dc50e827ac5
Update regdb with QCA regulatory database version 27.
Modify APL19 with new channels, power and radar pattern.
Change country IN to APL19_ETSIC.
Create new reg-domain ETSI15.
Create new reg-domain pair ETSI15_WORLD.
Move CTRY_SAUDI_ARABIA to ETSI15_WORLD.
Add new country CTRY_MYANMAR.
Change CTRY_CHILE to FCC13_WORLD.
Change CTL value for reg-domain APL8 to 'FCC'.
Enable all bandwidths for country CTRY_COSTA_RICA.
Add new reg-domain pair ETSI10_FCCA.
Move country CTRY_UNITED_STATES to FCC3_FCCA for mobile.
Update regdb version field.
Fix alignments.
Change-Id: I23a7ce98010e15eab606d4910df87bec15abc5ea
CRs-Fixed: 2353872
Channel number can be valid when finding out the enumeration for the
channel. Rate limit the messages for the same.
Change-Id: Id8755cffa9030054698f9e5e65c7c30c3155ad1e
CRs-Fixed: 2359311
P2P component used in CLD only, and needn't in hostcmn. So move P2P
component from hostcmn to cld. This change remove P2P related/codes
files from hostcmn.
Change-Id: I351ee153588bbcdb62041b4626370d451a3f56bb
CRs-Fixed: 2361487
Add unit tests for the following parsing function in QDF:
* qdf_int32_parse()
* qdf_int64_parse()
* qdf_uint32_parse()
* qdf_uint64_parse()
Change-Id: I43d162d008910396df051dd18e7a1ab7fede657a
CRs-Fixed: 2362740
