Support to send notification from host to user-space to notify
the completion of ML reconfiguration event to bring down a vap.
Change-Id: I35a8895f6de2970af339dd8b82177ce28ca56d95
CRs-Fixed: 3615539
Add QCA vendor attributes to indicate various MLO capabilities supported
by the WLAN driver to userspace. These capabilities are usually reported
by the firmware during the initial bootup handshake with the driver.
Change-Id: If4b18e0a02623a7983b025e69094a1b8736fb429
CRs-Fixed: 3635733
Define a new QCA vendor attribute to configure traffic
shaping policy applied during coex scenarios.
Subcmd is QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION
Change-Id: I42f6ffb20156fc7e7ecbceead825691a94c4fe9d
CRs-Fixed: 3625243
Fetch AP BSSID from each roam connection frame and cache the info in the
WLAN driver. When user space gets roam stats by
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_INFO, user space can now collect the AP
BSSID info for roam issue.
Change-Id: I4d78fa30096a30dd2987d4c7fa9698ff62777b3b
CRs-Fixed: 3615554
QCA_WLAN_VENDOR_ATTR_CONFIG_MODULATED_DTIM attribute is defined
incorrectly.
Modify this attribute to QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM
as per the upstream qca-vendor.h file.
CRs-Fixed: 3617541
Change-Id: I0f5ea3fb419af3e6850270a500edf2fa72401e93
Enumeration qca_wlan_roam_stats_frame_subtype defines the various frame
subtypes which may be collected by the driver and reported via the
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_FRAME_SUBTYPE attribute.
Two of the enumerators are:
* QCA_WLAN_ROAM_STATS_FRAME_SUBTYPE_PREAUTH
* QCA_WLAN_ROAM_STATS_FRAME_SUBTYPE_REASSOC
These were initially defined and used to respectively report
Authentication Response and Reassociation Response frames.
Now there is a requirement to also report Authentication Request and
Reassociation Request frames. In order to satisfy this requirement,
add two new enumerators:
* QCA_WLAN_ROAM_STATS_FRAME_SUBTYPE_AUTH_REQ
* QCA_WLAN_ROAM_STATS_FRAME_SUBTYPE_REASSOC_REQ
Note that the first of these uses the standard term "AUTH" instead of
the confusing term "PREAUTH" used previously.
And to align with that naming, and in order to clearly show the usage
of the original enumerators, rename them to:
* QCA_WLAN_ROAM_STATS_FRAME_SUBTYPE_AUTH_RESP
* QCA_WLAN_ROAM_STATS_FRAME_SUBTYPE_REASSOC_RESP
Furthermore, Authentication Request/Response frame refers to the
Authentication frames sent by the non-AP STA and AP, respectively.
And finally, to support backward compatibility with applications using
the original enumerators, redefine those in terms of the new names.
Change-Id: Ibbe62eefd695542cbd19d1b697446a60e5c4e747
CRs-Fixed: 3623174
Add an attribute QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_IS_ML to the
ADD_STA_NODE command. If this attribute is set, it implies that the node
being added is an MLD node.
Change-Id: I5a8f7248847d14d87116592f0a6de3952aee8664
CRs-Fixed: 3594263
Add a new QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_TX_LATENCY to
configure, retrieve, and report per-link transmit latency statistics.
When used as a command, userspace configures transmit latency monitoring
and get the corresponding statistics of the last period. When used as a
command response, driver replies the get action from userspace with the
statistics of the last period. When used as an event, driver reports the
statistics periodically.
Change-Id: I46966cd6bbad2deed7b2ad81e730170625907f67
CRs-Fixed: 3603431
Add a vendor attribute for an EHT DUT to configure the type of TID-To-Link
Mapping Negotiation Support for testing purposes.
Change-Id: I9e39fa1acfa07bf8e2514172adeed7a7d01f8abc
CRs-Fixed: 3608356
Add a vendor attribute for EHT testbed STA to configure MLD ID in the ML
Probe Request frame transmitted as part of host initiated scan request.
Change-Id: I759d147238f176a8aa1db62381528f81a92ba459
CRs-Fixed: 3605356
Define a new QCA vendor test config attribute to configure powersave
on MLO links.
This attribute is used for testing purposes.
CRs-Fixed: 3605466
Change-Id: I67daaa5c774aea20f139a60f04758babbfe32319
Currently if STA connected in 11BE mode, EHT Operation IE is not
getting updated in big data stats.
Add vendor command to support EHT operation IE,
QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_EHT_OPERATION.
Change-Id: I10bf45fcd6eeb7c06980d15a845be00ffdd72cde
CRs-Fixed: 3598720
Add a QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_AMPDU_CNT to
enable configuration of TX maximum aggregate size with a specific peer.
This can be used to improve performance in noisy environment. In AP
mode, the peer MAC address of the associated STA is specified with
QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_MAC.
Change-Id: I659659d9277d9c22024164d12636315952866654
CRs-Fixed: 3603816
Rename the attribute QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC
to a generic name QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_MAC, so other
configuration commands can reuse it. And make backward compatibility of
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC, define it as same
value of QCA_WLAN_VENDOR_ATTR_CONFIG_PEER_MAC (35).
Change-Id: I393afb23df697321bd49c4f6d87213050f218d75
CRs-Fixed: 3603779
Based on the new requirement, add support for vendor command
to switch the audio transport bearer.
Change-Id: I85e61dfbcec55bad7685f143d7128654e47b66f3
CRs-Fixed: 3585196
Define an attribute for high RSSI roam trigger threshold. STA is
expected to trigger roam if the current connected AP's RSSI gets above
this high RSSI threshold. STA's roam attempt on high RSSI threshold aims
to find candidates from other better Wi-Fi bands.
Change-Id: Ie0323ff990e2679fd9768d2242730f7369cdb64f
CRs-Fixed: 3586127
Add vendor attribute IDs QCA_WLAN_VENDOR_ATTR_ROAM_STATS_ORIGINAL_BSSID,
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_CANDIDATE_BSSID, and
QCA_WLAN_VENDOR_ATTR_ROAM_STATS_ROAMED_BSSID for updating roaming AP
BSSID to user space to enable user space collecting the BSSID for
roaming issues.
Change-Id: I7e41762309740e4b705c58d9340ad20fb179172b
CRs-Fixed: 3582516
Extend enum qca_wlan_vendor_attr_mlo_peer_prim_netdev_event to add MLD
MAC address, the number of links, and link info. Link info contains
ifindex and MAC address of each link of a non-AP MLD that was negotiated
in ML association.
CRs-Fixed: 3591427
Change-Id: I82adfc6a0c0cd31a2a322c09b25f93cfe9753343
QCA vendor extension is used for NDP setup. This defines the new
attributes QCA_WLAN_VENDOR_ATTR_NDP_CSIA_CAPABILITIES and
QCA_WLAN_VENDOR_ATTR_NDP_GTK_REQUIRED to support GTKSA, IGTKSA,
and BIGTKSA for NDP setup.
Change-Id: Iddd9d0f88d1d5d66fd72dc158801ad16c14f39e2
CRs-Fixed: 3583158
Extend QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT
attribute to support enum qca_wlan_vendor_opm_mode.
Add QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO and
QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE to configure inactivity
timeout and speculative wake interval in User defined optimized
power save mode.
Change-Id: I726ca91638e07fd1efae4921519bb6affc8b9c21
CRs-Fixed: 3567041
Currently, We are using GET_STATION_INFO_REMOTE_CH_WIDTH
attribute for remote channel width which is using u8 for
storing the channel width info. However, for 320 MHz there
is a need to use u16 attribute to store the channel width
info.
This change is to preserve old interface and use new
interface to store u16 attribute for remote channel width.
Change-Id: I01eb246c380a6155d0d96032549eee53a877cb2a
CRs-Fixed: 3567663
Extend bitwise mask in enum qca_wlan_tdls_caps_features_supported to get
the TDLS wider bandwidth capability from the driver.
Change-Id: I7e7209f72c7d8db3ac06ecafdfe91deb7438e1b2
CRs-Fixed: 3552602
Define a new QCA vendor attribute to enable/disable trigger
based UL MU transmission.
Change-Id: Ide36ec4869dc462879a57ff9a1e06f9f48e5c8d0
CRs-Fixed: 3538865
Add support for per-MLO link configurations in
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Additionally, add documentation for
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION commands.
Change-Id: Id83912079b3a4876891ac48beb069b17d4b8ebbf
CRs-Fixed: 3540412
Add support to control maximum allowed bandwidth update type for
the current connection.
Change-Id: I27880a5a969adf46861a58907d1e9e8ec35f9053
CRs-Fixed: 3540098
Currently there is no feature capability support for ll_lt_sap
and host driver and user space assumes that support for ll_lt_sap
is always present which not always true.
This may result in unexpected behavior if firmware does not
support ll_lt_sap.
To address this issue, add a feature capability to indicate
to userspace if host driver and firmware supports ll_lt_sap.
Change-Id: I4a2cc4fdb3d48469a5b1a4be32a4e760543b16cb
CRs-Fixed: 3520969
Define a QCA vendor command to configure MLO link id to the driver on
which the TDLS discovery response frame needs to be transmitted when the
local station is connected in MLO mode. This command is configured to
the driver the prior to every TDLS discover frame transmission when the
station is connected in MLO mode. If the station is connected in non-MLO
mode this command is not configured to the driver for TDLS discovery
frame transmission.
Change-Id: I5815a604d44549cd650744e3fd8c8ca79a076dbc
CRs-Fixed: 3523774
Add a new vendor command and attributes to notify TID-to-link
mapping changes to the userspace.
Change-Id: I9210103807f89f31ddf99965098a78bb4a798665
CRs-Fixed: 3516368
Add a new vendor command and attributes to indicate STA MLD setup links
removal.
Change-Id: If5dca34fa533fa76a8a1e8af456e3c893affbba0
CRs-Fixed: 3510765
Add vendor attributes for EHT testbed STA configuration.
This includes enabling STR MLMR mode and forcing power save
on active MLO links for a defined number of beacon periods.
Change-Id: Ie1808319c9e05901a996d122cc5afeb45bc07ce5
CRs-Fixed: 3497681
Add vendor attributes related to MLO and EMLSR mode
capability configuration for EHT testbed STA. It includes
EHT OM control support and EMLSR padding delay configuration.
Also, generalise the naming of HE OMI control enumeration to
OMI control as it now consists of both HE and EHT OMI control
fields.
Change-Id: I31f4935d59356f67a8ca0f065001325bafb3474a
CRs-Fixed: 3497673
Add vendor attributes related to MLO and EMLSR mode capability
configuration for EHT DUT. This includes forcing active MLO links
and invoking EMLSR mode entry or exit.
Change-Id: Icaf4dda1a614be5fe56966b0f2f2862ac6d62fb4
CRs-Fixed: 3497684
IEEE 802.11be enables multiple links between STA and AP. Each of the
link has its own set of statistics. Add additional attributes required
to fetch link layer statistics per MLO link.
For MLO connection, per MLO link statistics will be sent with the new
attribute QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK. Also, cumulative
statistics of all the MLO links will be sent outside
QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to be compatible with legacy user
space.
For non-MLO connection, the statistics will be sent without being nested
inside QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK attribute.
Change-Id: I2abe31ad754e59c101ff79dd3ae956bc93880a33
CRs-Fixed: 3488156
Define bitmap values used by LL_STATS vendor command
and update the corresponding kernel documentation.
Change-Id: I70c86926a19907a2a1053bccbd7b316b198e1fb8
CRs-Fixed: 3488125
Currently the vendor attributes qca_wlan_vendor_attr_ll_stats_set,
qca_wlan_vendor_attr_ll_stats_clr, qca_wlan_vendor_attr_ll_stats_get and
qca_wlan_vendor_attr_ll_stats_results for LL_STATS vendor command
are not in sync with the upstream code.
So, fix the differences and match downstream code for LL_STATS vendor
command with upstream code.
Change-Id: I373470e1217f7da82bb25b40e07ed96d1b1a1d6c
CRs-Fixed: 3489509
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".
Change-Id: I8a6ed222342398d21d87e7d31956426f3c99cba0
CRs-Fixed: 3481633
Define a new attribute QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST
to configure the full list of allowed frequencies for the AP operation.
The configuration is valid only from the next BSS start until the BSS is
stopped. The drivers shall filter out channels on top of this list of
channels based on regulatory or other constraints. This can be used to
specify user's choice of frequencies, allowed list of channels with
static puncturing feature, etc.
Change-Id: Ib74acf2df17d8eb0fb65febc3b3cf54c39de6fc4
CRs-Fixed: 3453682
Add a vendor feature flag for the driver to indicate support
for allowed frequency configuration in AP mode.
Change-Id: I5c4483b229fa68c89a80272ec1ae3f5a95452f6d
CRs-Fixed: 3454926
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".
Change-Id: If25d725f610125039a3218ec741cff233c3cb8ef
CRs-Fixed: 3473404
Add a new vendor command to trigger computation of connected channel
statistics such as channel utilization in STA mode.
Change-Id: I868a85bbbee9f9b050636789c3d7217b71164852
CRs-Fixed: 3460890
Add a new vendor command QCA_NL80211_VENDOR_SUBCMD_GET_MONITOR_MODE to
get the local packet capture status in the monitor mode. Add required
attributes to respond with status of the monitor mode. The monitor mode
can be started/configured by using the
QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE subcommand.
Change-Id: I72edd46f85b545d7aecb3c704441e810db9ca711
CRs-Fixed: 3415711
Add a new vendor command and attributes to control and fetch the state
information of the MLO links affiliated with a specific interface.
This will enable user space to dynamically control the MLO links states
based on the latency, throughput and power save requirements.
Change-Id: I1ef710a6f3a1f8723bb3d1c564c0c803bfa0b587
CRs-Fixed: 3416250
Add QCA_WLAN_VENDOR_MCC_QUOTA_TYPE_LOW_LATENCY attribute
to enable/disable Multi-Channel concurrency low latency mode.
The firmware will do optimization of channel time quota for
low latency in Multi-Channel concurrency state if enabled.
Change-Id: Ibcf1ac82b2650899043ea9b61be5e1501e2d85a1
CRs-Fixed: 3409648
