qcacmn: Add vendor attributes for EHT OM control, EMLSR padding delay

Add vendor attributes related to MLO and EMLSR mode
capability configuration for EHT testbed STA. It includes
EHT OM control support and EMLSR padding delay configuration.
Also, generalise the naming of HE OMI control enumeration to
OMI control as it now consists of both HE and EHT OMI control
fields.

Change-Id: I31f4935d59356f67a8ca0f065001325bafb3474a
CRs-Fixed: 3497673

os_if/linux/qca_vendor.h

@@ -9159,9 +9159,9 @@ enum qca_wlan_emlsr_mode {
 };
 
 /**
- * enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for
- * HE operating mode control transmit request. These attributes are
- * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and
+ * enum qca_wlan_vendor_attr_omi_tx: Represents attributes for HE and
+ * EHT operating mode control transmit request. These attributes are
+ * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX and
  * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
  *
  * @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value
@@ -9191,21 +9191,48 @@ enum qca_wlan_emlsr_mode {
  * 1 - Determine which HE TB PPDU types are allowed by the STA if UL MU disable
  * bit is not set, else UL MU Tx is suspended.
  *
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_RX_NSS_EXTN: 8-bit unsigned value in the EHT OM
+ * Control subfield combined with the Rx NSS subfield in the OM Control subfield
+ * indicates NSS - 1, where NSS is the maximum number of spatial streams that
+ * STA supports in reception for PPDU bandwidths less than or equal to 80 MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_CH_BW_EXTN: 8-bit unsigned value indicates
+ * 320 MHz operating channel width supported by the EHT STA for both reception
+ * and transmission.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_TX_NSS_EXTN: 8-bit unsigned value in the EHT OM
+ * Control subfield combined with the Tx NSTS subfield in OM Control subfield
+ * indicates NSTS - 1, where NSTS is the maximum number of space-time streams
+ * that the STA supports in transmission for PPDU bandwidths less than or equal
+ * to 80 MHz.
  */
-enum qca_wlan_vendor_attr_he_omi_tx {
+enum qca_wlan_vendor_attr_omi_tx {
 	QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0,
 	QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1,
 	QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2,
 	QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3,
 	QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4,
 	QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE = 5,
+	QCA_WLAN_VENDOR_ATTR_EHT_OMI_RX_NSS_EXTN = 6,
+	QCA_WLAN_VENDOR_ATTR_EHT_OMI_CH_BW_EXTN = 7,
+	QCA_WLAN_VENDOR_ATTR_EHT_OMI_TX_NSS_EXTN = 8,
 
 	/* keep last */
-	QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST,
-	QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX =
-	QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1,
+	QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_OMI_MAX =
+	QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST - 1,
 };
 
+/* deprecated legacy names */
+#define QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX \
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX
+#define qca_wlan_vendor_attr_he_omi_tx \
+	qca_wlan_vendor_attr_omi_tx
+#define QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST \
+	QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST
+#define QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX \
+	QCA_WLAN_VENDOR_ATTR_OMI_MAX
+
 /**
  * enum qca_wlan_vendor_phy_mode - Different PHY modes
  * These values are used with %QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE.
@@ -9523,10 +9550,10 @@ enum qca_wlan_vendor_attr_wifi_test_config {
 	 * channel bandwidth, Tx Nsts and UL MU disable attributes.
 	 * These nested attributes are used to send HE operating mode control
 	 * with configured values.
-	 * Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes.
+	 * Uses the enum qca_wlan_vendor_attr_omi_tx attributes.
 	 * This attribute is used to configure the testbed device.
 	 */
-	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33,
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX = 33,
 
 	/* 8-bit unsigned value to configure +HTC_HE support to indicate the
 	 * support for the reception of a frame that carries an HE variant
@@ -9811,6 +9838,27 @@ enum qca_wlan_vendor_attr_wifi_test_config {
 	 */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_TB_SOUNDING_FB_RL = 66,
 
+	/* 8-bit unsigned value to configure the support for receiving an MPDU
+	 * that contains an EHT operating mode control subfield.
+	 * This attribute is used to configure the testbed device.
+	 * 1-enable, 0-disable.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_OM_CTRL_SUPPORT = 67,
+
+	/* 8-bit unsigned value to configure the driver with EMLSR padding delay
+	 * subfield value.
+	 *
+	 * 0 - 0 us
+	 * 1 - 32 us
+	 * 2 - 64 us
+	 * 3 - 128 us
+	 * 4 - 256 us
+	 * 5-255 - Reserved
+	 *
+	 * This attribute is used for testing purposes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EMLSR_PADDING_DELAY = 68,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =