Currently gi value was not considered for ratekbps calculation
if sgi is enabled, include gi parameter for ratekbps calculation
Change-Id: Idd8b36375493c26f22f2f4f0c7ae922df37e65a1
Peerid 0xffff is for scan peer and rate information needs to
be delivered using valid user index from API dp_get_ppdu_info_user_index
Change-Id: If200467755c4b18002db221413976624ca66a9c9
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
Disable m_copy/enhanced_stats feature causes the bpr feature disable.
Hence add check for bpr feature status during enable/disable of m_copy
and enhanced_stats.
CRs-Fixed: 2275686
Change-Id: I5592b422823446374ce560fe3653990be4c796b0
macros and fw cmn headers included in hal_internal.h is moved
to a new hal_hw_headers.h to avoid these getting included in hif
layer. Include the new hal_hw_headers.h file
Change-Id: I3390ae9e71ca561d94a265e1fdf4d9354e7b2474
Reverting the change where mgmt ctrl frame buffer was assinged NULL for
NONTLV payload case as this check is handled later in the same path.
Change-Id: Icccfb401fe34da593198bac27650139654021636
CRs-Fixed: 2276923
In existing code, variable used to track mgmt. and control
TLV is getting reset only in success case.
Add change to reset it appropriately.
CRs-Fixed: 2248313
Change-Id: Ieac5dc215f441b0530013ea1e36abcba19294754
structures
Rename osif_pdev to ctrl_pdev and os_if_vdev to ctrl_vdev in dp_pdev and
osif_dev structures respectively which are
pointing to objmgr_pdev and objmgr_vdev structures to maintain
uniformity
Change-Id: Ida95a1a90ea74513573f00c652338baee3df897a
CRs-Fixed: 2241362
This change required to match Tx PPDU BW value with
FW stats. As per firmware enums its starts with 5MHz
BW value. So to match 20MHz value with enum zero, need
to subtract from BW populated from TLV.
Change-Id: Ifcc49839c08de78c9200b877890fdce2e0846f1d
Add null check for pdevhandle before processing htt msg.
This is added for polled mode to avoid race between pdev detach
and CE poll timer stop.
Change-Id: I925e70985bd11e05e0679ad0107493aaefe8a273
CRs-fixed: 2352564
In existing code the HTT stats buffer was getting freed after
parsing mgmt. payload TLV, which was leading to missing beacon
metadata.
Add change to continue processing HTT stats buffer even after
receiving mgmt. payload TLV.
Change-Id: Iac67577ea5e362f046a1d5432204362a9559c788
CRs-Fixed: 2248313
Cancel broadcast of probe response if beacon is already sent
in beacon offload.
Change-Id: I4fea51433fbb959e05988c2daac89fbe839b1cdf
CRs-Fixed: 2209282
Address the following issues in the dp folder:
CHECK: 'availble' may be misspelled - perhaps 'available'?
CHECK: 'catagory' may be misspelled - perhaps 'category'?
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'exceded' may be misspelled - perhaps 'exceeded'?
CHECK: 'explicitely' may be misspelled - perhaps 'explicitly'?
CHECK: 'Inteface' may be misspelled - perhaps 'Interface'?
CHECK: 'lengh' may be misspelled - perhaps 'length'?
CHECK: 'messsages' may be misspelled - perhaps 'messages'?
CHECK: 'miscelleneous' may be misspelled - perhaps 'miscellaneous'?
CHECK: 'Ouput' may be misspelled - perhaps 'Output'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'Poiter' may be misspelled - perhaps 'Pointer'?
CHECK: 'psuedo' may be misspelled - perhaps 'pseudo'?
CHECK: 'registerd' may be misspelled - perhaps 'registered'?
CHECK: 'requred' may be misspelled - perhaps 'required'?
CHECK: 'retreive' may be misspelled - perhaps 'retrieve'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'vaild' may be misspelled - perhaps 'valid'?
CHECK: 'virtaul' may be misspelled - perhaps 'virtual'?
Change-Id: I66b9cdc6115dd133b385e60c9d02cefd1bd0bac3
CRs-Fixed: 2241574
Set pdev mask in the HTT Stats request based on
mac id number provided from the user.
Change-Id: Ie8f1208fd3598efd2ea3736719c8b444ef86881a
CRs-Fixed: 2237467
Avoid vdev aggregate stats for every ppdu stats event as it is
consuming high CPU in veriwave max clients testcase. Instead
aggregate the stats when ifconfig athX command is issued. Add
CDP API to aggregate and update stats called when needed
Change-Id: I801d5f8fab0c275942b77a9975293f95bd4026b0
CRs-Fixed: 2220704
Fill htt msg length before the htt stats response
handler so that the wifistats tool can read the
htt msg data correctly.
Change-Id: I544d1b97c8d74a0115a4a5a509780a6e9c273ab7
CRs-Fixed: 2231948
Update function prototype of dp_ppdu_stats_ind_handler. It should be
same when WDI_EVENT_ENABLE is defined and not defined.
Change-Id: I390d35b3b9f5f283fc3b960f00563fb997ef7f95
CRs-Fixed: 2230955
Retrieve length from every htt msg to
parse the tlv's from the htt msg and also
add statistics counters to account for error
packets in Rx path.
Change-Id: I17105174734975dc0d5093c587697346a8ada725
CRs-Fixed: 2214594
The following changes are added for Tx capture/Mcopy mode
1. Append ppduid for FW generated mgmt. frames
2. Append ppduid received in mgmt. TX completion for host
generated mgmt. frames
3. Reuse nbuf received in HTT msg to send mgmt. payload to
upper layers
Change-Id: I073cafa6389ed1ed835cc3ba4b9421b7a4b97d7f
CRs-Fixed: 2185543
Assign num_mpdu to mpdu_tried_mcast for mcast stats updation
Defer bss peer assigning till peer map event arrives
Do not set delete_in_progress for bss Peer
Change-Id: I0881ea3c8804990c336d97cb7b239a991ec64fa9
Add linked list logic to hold all ppdu descriptor status in a list till
all TLVs have been processed
This design handles asynchronous arrival of tlvs from fw per ppdu
Change-Id: Ib8943d7c826c0b441f58f0eaba7ae0bdc0539d9a
Byte counts reported in HTT Tx PPDU indications is sum of MPDU bytes
(including the 802.11 header).In Rx, we derive byte count from per-MSDU
Rx indications and this does not include 802.11 header bytes.
This is causing mismatch in reporting of Tx and Rx byte counts.
Also PPDU TLV for mcast MPDUs is not giving correct multicast bytes count.
Move the byte count update for Tx also to per-MSDU indications to match
the behavior with Rx
CRs-Fixed: 2182576
Change-Id: I92e779661014b058ba98c830881ff8eded4ea6ff
Add htt tx and rx structs from HTT to cdp_pdev_stats.
These Fw tx and rx stats are obtained through HTT events.
athstats application uses cdp_pdev_stats that contains host stats
and fw stats.
Change-Id: Ia063f406bdc6d32a684c4026b8425ecc96faa3db
CRs-Fixed: 2190793
ppdu stats timestamp,duration,channel etc were not
updated and corrected the same
Also RSSI was incorrectly getting updated for
mcast frames also, fix both of the above issues
Change-Id: Id8446c6c0cfe8761f8c524fc7af0ff5bdd8b96aa
1. Assert if length received from FW is not equal to
the expected length
2. Count the number of PPDU stats received by host and
print in "iwpriv athX txrx_stats 260"
3. Optimize the PPDU stats tag mask sent to FW for
enhanced stats enabling
Change-Id: I60019de93bb3914955a03546504efc820c960746
CRs-Fixed: 2170704
When TLVs come from TAC_thread last tlv sent by FW is
HTT_PPDU_STATS_SCH_CMD_STATUS_TLV
and in Tqm thread HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV is the last
TLV to be sent. HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV though can
come either in tqm thread or tac thread based on tid type.
Add change to process HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV when it
comes from tqm thread and pass the populated buffer to the appropriate APIs
Change-Id: I7a064aba4e3c6814b63dcf4bb97cfb3be0194c39
CRs-Fixed: 2180477
pass psoc/pdev object as ctrl pointers to instead of legacy objects.
It introduces new APIs to get feature pointers of psoc/pdev.
DP attach API param modified to pass ctrl psoc (psoc object)
Change-Id: I3d83f28c3e72e5ee984a4220b9d5cf3c4522b501
CRs-Fixed: 2177109
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
Buffers sent through htt htc endpoint is cleaned up within DP. Set this
endpoint in transport layer to ensure that transport layer skips buffers
from this endpoint during cleanup of pending buffers in source ring.
Change-Id: I3f7d36c26347b508913d4200e0806d93408097e8
CRs-Fixed: 2168235
Add following changes in the context of PPDU stats
1. Mirror copy mode enhancements
2. Fix memory leak due to mgmt. TLV
3. Reset RX monitor lite ring when enhanced stats disabled
Change-Id: Ifb260929290bc483dc05b152a11cd675104f3a0d
Add support to display multicast packets stats. Also
avoid sending message to target-if layer for every MSDU
to update node statistics
Change-Id: I7bb73d97bd8a02a601d191040a9a5730a9584d3d
In dp_process_htt_stat_msg function, the stats message must be
interpreted one by one. It can't move to the next message unless
the current one is handled completedly. Or else it will cause a
memory copy overflow.
CRs-Fixed: 2156792
Change-Id: I8a3784cd17f2a68b16c4f47c6b1a24e12d23aaa5
htt_h2t_rx_ring_cfg is invoked with suitable configuration based on
filter passed by wlan_set_monitor_filter.
Change-Id: I2fbb81e95903ae1bead92892fdb3165c8a515f14
Add polling timer to reap monitor status rings
until PPDU end interrupts are enabled.
Change-Id: I742b0df6fd5a369d9664b5c2e09a70916585174b
CRs-Fixed: 2117063
Add support for following node statistics for Lithium DP
1) Number of Tx unicast MSDUs and bytes
2) Last Tx and Rx rate
3) Excessive retries per AC
Change-Id: If533df25e5299bf399bed85ace99763aab74134e
AM copy mode
Have a configuration to send first 100 bytes of PPDU, whenever
requested by upper layer.
Add required variable and handle code to enable/disable AM copy mode.
Change-Id: I1ebdcd0d1777e276af8c16334dae1f1a0760d5a8
CRs-Fixed: 2127108
Update channel information tx completion with frequecy
received in ppdu tx completion. Convert freq to channel
and store in pdev.
Change-Id: I5826528b76b4a5a28a05e805b737d2d49d2140d8
