This change fixes issue with EAPOL frames in Tx capture
EAPOL frames completions are received with ACK completion.
For ACK completion, ba_size, ba_bitmap, ba_seqno are not updated earlier.
it was leading to dropping the frames in driver.
This fix updates ba_size, ba_bitmap, ba_seqno for QOS TID frames in ACK
completion handler
Change-Id: I58308a13c1b6addb95f424aa7ad45fe64e93b532
CRs-Fixed: 2620890
Move dp monitor inline APIs to header file from dp_rx_mon_dest.c
to dp_rx_mon.h to use it in component dev
CRs-Fixed: 2626054
Change-Id: I3a31dacd7d7e817f144708f9bda5536808080864
Sometimes ack ba status tlv comes twice which cause ppdu desc to be hold
as waiting for some more tlv as mpdu ack ba tlv is not matching with
completion common tlv mpdu count.
Change-Id: Id946ecd53018ee7abe93aa6c5f62e69d41b750e8
Add doppler and spatial reuse in ppdu descriptor to be able to use it on
HE information for tx capture
Change-Id: Id87a692a89d00c64929624c22c2efc27bc873e43
Currently mesh mode uses channel numbering which is derived
from APIs that don't support 6GHz channels numbering due to the
overloading of 6GHz channels with 2.4GHz and 5GHz.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support 6GHz.
Change-Id: Ib0b39ebae2a22bd6b2b5d17b9058c3c2100e0d59
CRs-Fixed: 2605229
For Disassoc frame, fw send ppdu stats to host with peer_id
of the previous associated client. peer id is valid and peer
structure is NULL making framectrl as zero for disassoc frame.
with the fix frame ctrl are populated before checking for invalid peer.
Change-Id: I5960685a4c90f00a850f4f1fa2b3d883117fb443
In case of nbuf map failure as part of htc_send_pkt for
tx credit flow disabled endpoints, htc pkt is not put
back in the freelist as return status is not checked
resulting in memory leak.
Fix is to put the htc pkt back in the freelist based on
status returned by htc_send_pkt.
Change-Id: I9173fa3684bc887a360b92d48b689c53a5ad5dbe
CRs-Fixed: 2596297
FSE setup, FSE cache flush and FISA config commands do not have
response, tag them as HTC_TX_PACKET_TAG_RUNTIME_PUT so that get on
runtime_pm is released. Without this target fails to go to runtime_pm
suspend.
Change-Id: Ibb14484dd50c62bb4680b41acf93ce3da1bec796
CRs-Fixed: 2606884
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
as we are overriding bar ppdu information, we need bar start/end
timestamp and duration.
added resp_type, mprot_type, rts_success and rts_failure in
cdp completion user.
Change-Id: I53c215e948fad8d079e1d4c40ec07d34aff1fefe
remove multiple update of tid for same ppdu stats.
tid is populated from user rate, completion common and
ack ba status tlv. As tid from ack ba status tlv comes wrong
for non-qos tid. we remove the tid populate in ack ba status tlv.
Change-Id: Ia8b0004fc329bf0fecc1a622e199635034c213a7
expected tlv bitmap can't be guaranteed as different ppdu frame has
different expected tlv bitmap. Check last tlv before sending stats
as tlv are coming from firmware in sequential order.
retry counter is not populate correctly, only successful
completion ppdu status get update
Change-Id: Ia4b71371bbf38996df9dbb67746078d5fbd628a1
Correct the debug message to print the appropriate
ring id when backpressure events are reported
Change-Id: I4cb2af9c802469ecd0c38bdd3789439048de876f
CRs-Fixed: 2556208
Remove pdev and vdev control path handles from data path.
Instead send pdev_id and vdev_id along with opaque soc
handle in ol_if_ops.
Change-Id: I6ee083f07e464f283da0d70ada70a4e10e18e1b2
rem_stats keeps counter of remaining stats to be processed.
At present this counter is of type uint8_t and hence can
accumulate till 256 counter but num_stats is of type uint32_t.
Hence if remainting stats to be precessed is 256 then rem_stats
value will be 0 as it will only consider LSB 8 BITS and it will
result in stats mismatch and hence memory leak.
Increasing size to uint64_t to accumulate more counter size.
Change-Id: Ifa86c7e4a73a5a700e9033c8756e986d86025cf9
Sequence number should be obtained from user_compln_ack_ba_stats_tlv
in HTT PPDU stats messages since enq_bitmap TLVs are not sent for
non-QOS frames.
Change-Id: I2d5ddb8c7397953081df94f77f0bd8a30a581b11
Pass pdev to dp_peer_stats_notify API instead of de-referencing
this from peer structure.
Change-Id: I5dc679283f5822f44b4140aefb3aee44a826c720
CRs-Fixed: 2500647
Adds new INI variable for threshold control.
Host sends message to target with new threshold info.
If buffer reaches threshold then MAC drops incoming monitor frames.
Change-Id: Id659d7df68a5ec0b22fb571dc1ffa4990f8fcc4f
Process smart antenna fields from tlv
HTT_PPDU_STATS_USR_COMPLTN_COMMON_TLV in tx
completion path and export it to tx_completion.
Change-Id: If14e711b0aee8e583fd329f3c3915904649ffe47
CRs-Fixed: 2491429
rxhost ring backpressure:
identifying rings causing rx backpressure after being notified
by FW message. Adding logs to be able to see at what state
the ap was after a backpressure event was triggered.
Adding radio stats (261) as well as napi stats for better
state description.
Change-Id: I395450be6faaf959f91729516a7b229c5b3396ce
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
Printing ring stats from requesting txrx stats needs access PCIe link
so make sure it is resumed by doing a sync resume if it is runtime PM
suspended. Also response of h2t_ext_stats_msg from FW is not guaranteed
so tag it properly so that in HTC layer, corresponding "put" API will
be called right after sending the packet.
Change-Id: Idc5797b38557ed5779d920c72200b9d28769ab58
CRs-fixed: 2487521
Make change to remove usage of void pointers for
ctrl psoc in DP and instead use a opaque pointer
struct cdp_ctrl_objmgr_psoc.
Change-Id: I9fac21db1156378fc10b95cf10517afa4364da00
CRs-Fixed: 2484411
Add code to remove void pointer usage for htt_soc
and introduce opaque pointer to be used intead of void
from dp layer into htt layer
Change-Id: I555b67af656e89f63d81bb5aa8c7472ea517ae85
CRs-Fixed: 2484402
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Remove dereferencing of htt_soc structure from dp layer
and instead use HTT APIs.
Change-Id: I6b796f9b6504c763e6df2cf49b15bf3eecfbdf69
CRs-Fixed: 2483401
fix memory leak issue in tx mgmt ctrl payload tlv.
if any of the mgmt or pkt capture feature is turned on.
htt_t2h_msg is hold in mgmt_buf and not set to NULL on free.
which cause leaking next target to host nbuf.
Change-Id: I0d9e0194e51a21b348aadf747b8c9def5c245eda
Remove note section from code comment and placed
in commit description for better readability.
Macro for sending data packets Changed from macro function
to static inline function due to error reported by
checkpatch for multiple use of same variable.
Change-Id: I0752cfff7502fabe0c2351a21a94cfac4625278f
CRs-Fixed: 2490594
