Buffers sent through htt htc endpoint is cleaned up within DP. Set this
endpoint in transport layer to ensure that transport layer skips buffers
from this endpoint during cleanup of pending buffers in source ring.
Change-Id: I3f7d36c26347b508913d4200e0806d93408097e8
CRs-Fixed: 2168235
Add following changes in the context of PPDU stats
1. Mirror copy mode enhancements
2. Fix memory leak due to mgmt. TLV
3. Reset RX monitor lite ring when enhanced stats disabled
Change-Id: Ifb260929290bc483dc05b152a11cd675104f3a0d
Add support to display multicast packets stats. Also
avoid sending message to target-if layer for every MSDU
to update node statistics
Change-Id: I7bb73d97bd8a02a601d191040a9a5730a9584d3d
In dp_process_htt_stat_msg function, the stats message must be
interpreted one by one. It can't move to the next message unless
the current one is handled completedly. Or else it will cause a
memory copy overflow.
CRs-Fixed: 2156792
Change-Id: I8a3784cd17f2a68b16c4f47c6b1a24e12d23aaa5
htt_h2t_rx_ring_cfg is invoked with suitable configuration based on
filter passed by wlan_set_monitor_filter.
Change-Id: I2fbb81e95903ae1bead92892fdb3165c8a515f14
Add polling timer to reap monitor status rings
until PPDU end interrupts are enabled.
Change-Id: I742b0df6fd5a369d9664b5c2e09a70916585174b
CRs-Fixed: 2117063
Add support for following node statistics for Lithium DP
1) Number of Tx unicast MSDUs and bytes
2) Last Tx and Rx rate
3) Excessive retries per AC
Change-Id: If533df25e5299bf399bed85ace99763aab74134e
AM copy mode
Have a configuration to send first 100 bytes of PPDU, whenever
requested by upper layer.
Add required variable and handle code to enable/disable AM copy mode.
Change-Id: I1ebdcd0d1777e276af8c16334dae1f1a0760d5a8
CRs-Fixed: 2127108
Update channel information tx completion with frequecy
received in ppdu tx completion. Convert freq to channel
and store in pdev.
Change-Id: I5826528b76b4a5a28a05e805b737d2d49d2140d8
Move peer stats updation to PPDU indications from per-MSDU indications
to optimize CPU cycles. Add dp_rx_stats_update for receiver side PPDU stats
Change-Id: I4bdda8ac447e64cd1017e5be3949ec3f915a9d71
CRs-Fixed: 2123969
num_msdu, qos and ppdu_type were being parsed incorrectly.
Parse them appropriately.
Change-Id: I665285bc0b628fd1d9459473d18ef62577bbd54e
CRs-Fixed: 2133732
Add support to send MSDU, mgmt. and ctrl payload along with metadata
to upper layer callback
FR 42132
Change-Id: Ie751322c7c15419ea908538e9e8687b64693fcfa
CRs-Fixed:2068486
Update of per-peer statistics was disabled from per-MSDU indications
as they are now updated from per-PPDU indications. However, the data from
per-PPDU indications is incorrect for some fields. Re-enable update of
statistics for per-MSDU completions till this issue is fixed in FW
Change-Id: I2983ef9244a6f95104ba49ab6d1c6543a951d0b2
CRs-Fixed: 2128230
Packet log messages be coming as HTT messages for Lithium. Temporary
change to bypass HTC connection for this new HIF pipe (CE 5), which
will be used for packet log and other high-priority HTT messsages.
Proper HTC connection to be added later once required FW changes
are available
Change-Id: I53361b4c28b838dacf62f435cc12051bb2eb65b6
Parse PPDU TLVs provided by FW which are required to
capture TX data path stats
Change-Id: If91834aa94ff8893ba1f292d801f2c00ecdaea1f
CRs-Fixed: 2104488
1. Define bitmap array appropriately and expand ppdu per user
tx stats array to accomodate upto 8 users stats
2. Fix issue where even with 1 WLAN STA user_index was exceeding zero
3. Allocate 5 bits for ppdu_type variable
Change-Id: I969c929c3e16d4027a5e642a0a9195979c95e9cc
CRs-Fixed: 2121122
Enable reaping of HAL PPDU Status ring when ol stats are enabled.
Added peer mac address and first_data_seqcntl fields into CDP Rx PPDU_stats
structure. Added support to disable printing of per packet stats through
iwpriv command.
Change-Id: If0f967676e867c7ba9870770c3c818cbea43461a
Add support to include per msdu header info for each msdu in monitor mode.
Set HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED in htt msg
from host. Enable per msdu bit and set it in the dp_htt to be used for
filtering.
Change-Id: I36217e893c40570c86b758f586c581d88633b557
CRs-fixed: 2101013
Add support to process HTT PPDU per-user TLVs that are sent to host from
FW on PPDU Tx completions.
Change-Id: Ia05d5d0e045bfeb4143886ef3a1b075d927645fa
CRs-Fixed: 2098696
Add support to process HTT PPDU statistics for transmit
datapath and deliver PPDU indication to CDP interface.
Change-Id: I22e757497e13ce86fb7b42112fd56555c58e97bc
CRs-Fixed: 2098696
In existing implementation when previous stats handling is under process
and a new stats event is received, new stats event is dropped.
Add support to queue any received stats message and process it
later in work queue context.
Change-Id: I7895a2f7ac49456c49374ce209da97c2148f43a2
CRs-Fixed: 2076552
Add a misc list which stores HTT msgs & later frees them during rmmod.
This is required to prevent memory leaks during rmmod.
Change-Id: Iecc04ec38cfa1b459064da74dffa5bfeffdba956
CRs-Fixed: 2068058
Setup & process the RXDMA_DST ring to handle error frames
from RXDMA block. Pro-active fix to handle the WAR for
the WBM stuck issue seen when sending RX_FLUSH command.
Change-Id: Ibf56062da2cd9b5d447f1d43bbae5944426d88c8
CRs-Fixed: 2059870
Enable RXDMA status, desc, buffer and destination rings to
support monitor mode. The change also provides fix to properly
map pdev_id to mac_id.
CRs-Fixed: 2071602
Change-Id: Ie9caaaa0021d5842eaf28a5532b3ab5512fe507f
Currently all mgmt, ctrl and data frames are not enabled
while requesting for the pkt_tlv configuration for the
monitor mode. Adding changes to enable these while sending
HTT ring configuration message.
Change-Id: Ifa23edb55562512e18bb2ee4c426fa0b5e45a577
CRs-Fixed: 2071602
implicit conversion from enumeration type 'A_STATUS' to different enumeration type 'QDF_STATUS'
implicit conversion from enumeration type 'QDF_STATUS' to different enumeration type 'A_STATUS'
CRs-Fixed: 2063344
Change-Id: Id3613d0b7fca58c3d94c5af59838b0bff3ef26de
The pdev id in host is not the same as firmware MAC id
Add host pdevid to firmware MAC id mapping code
in set pdev id for htt sring setup and
set pdev id for htt rx ring selection cfg
The mon_ppdu_status is not synchronized
Fix the issue on pdev mon_ppdu_status by reset
mon_ppdu_status to DP_PPDU_STATUS_START after
monitor destination ring is processed
Add code for mpdu fcs error for later use
Change-Id: Ia6245cc9441e3339bcd01ed18fdce2f33f3f7699
Changes to process PHY TLVs from monitor status ring and extract
information required for radiotap header.
Change-Id: I99d642e7506ea797b26dbfac89fd223d1a4c0a55
CRs-Fixed: 2048006
Adding support to parse stream of HTT TLV's recieved as response
to the HTT EXT stats request message
Change-Id: I44c990a1ed91c2381b89811de33c0717bd24be7d
CRs-Fixed: 1114641
Window size needs to be incremented by 1 since fw needs to
represent a value of 256 using just 8 bits.
Change-Id: I18cdb6fb928f28893dc0e1fd2fb574a12ca53972
CRs-Fixed: 2025197
This change is for supporting monitor mode VAP. All the monitor mode ring
is configured. The related monitor mode ring includes:
-monitor mode buffer ring
-monitor mode destination ring
-monitor mode status ring
-monitor mode link descriptor ring
The packet is not sent to monitor mode ring unless the monitor mode VAP is
configured. This release support Multiple VAP - AP/STA VAP plus Monitor
VAP configuration. The status ring is not used in this release. However,
the ring is tested and the ring is moving and there are TLV's in the ring.
Change-Id: I782ee0c3b998d8b3bbac79b5e7fdecdbff15fa93
CRs-Fixed: 2013049
pkts should be forwarded from one STA to another
STA belonging to same VAP from within the driver
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Conflicts:
dp/wifi3.0/dp_rx.c
dp/wifi3.0/dp_types.h
Conflicts:
dp/wifi3.0/dp_rx.c
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Setup all TID queues during rx peer init
Add support to handle ADDBA HTT msg
Allow pkts to be fwd to stack even if peer isn't found
Change-Id: Icdfec2eeaa3e0ca62202ed278cd63209b8f79cb2
CRs-Fixed: 2016138
Firmware expects the following:
- mac id for the refill ring configuration should be 0 (soc)
- mac id for the rx dma rings should be 1, 2 (mac 0 and mac 1)
Change-Id: I23c652e2e1f8e2fca69647906321e4d867a42609
CRs-Fixed: 2003050
