Use channel flags to determine DFS channel. Channel state is
set to CHANNEL_STATE_DFS even for passive channel.
Change-Id: I5ff88f05d2967f9e93de028d59d91369b66303c5
CRs-Fixed: 2695162
Currently, for action code MCSC RSP frame type is updated to
MGMT_FRM_UNSPECIFIED and is not received by framework.
Fix is to update frame type to MGMT_ACTION_MCSC_RSP, so that framework
can receive MCSC packets in case of action type MCSC_RSP.
Change-Id: I81f107558959dcf1c4967e677d6e1ba3d71e3596
CRs-Fixed: 2707310
Add a new wakelock for idle shutdown in order to prevent suspend
from occurring during idle shutdown.
Change-Id: Ia0c7422d3a12e7ff27d5acf9f57a81be13e5ef7d
CRs-Fixed: 2706461
Peer ref count incremented in dp_request_rx_hw_stats
is not decremented back in case of error scenarios
resulting in possible ref leak and failure in peer
deletion.
Fix is to invoke dp_peer_unref_delete for error
scenarios in dp_request_rx_hw_stats error.
Change-Id: I81ecf60a97ff5c804445fd713ed779c478df8521
CRs-Fixed: 2706596
Remove panic when tlv doesn't matching attributes, the following commit
takes away a chance to pass invalid values tlv to test the the wmi event
hence reverting commit ca24670e56.
Change-Id: Iafff2067288c8a6fafa016f21b1d7fdfdcb0753e
CRs-Fixed: 2706245
The DMA Map/UnMap was restricted to buffer size in rx process.
But the Map/UnMap API was not changed in rx error process, apply
this change in the rx error data path. So that there will be no
paging request error when rx data error happen.
Change-Id: I690e902ef5c05f216b2eb87de977fd0b45ecadab
CRs-Fixed: 2702369
Host configures max ndi interfaces support to firmware using
WMI_INIT_CMD. In resource config of WMI_INIT_CMD, host updates
max number of ndi interfaces support and sends it to firmware.
Change-Id: I44ccbe726663bc18d3c69b4aae0b0e3e9c1501ee
CRs-Fixed: 2701559
Add driver command support to dump all the function call mapping
which is cached in global buffer.
Change-Id: I6df9273c641e2cf3ecefe64c8f3c15d8ec2f9b20
CRs-Fixed: 2677981
Revert the change for wlan_serialization_generic_timer_cb
from change I760b41b81c006187efb162d410390e1c11878b82.
The change introduced a CFI error because timer callbacks
do not expect a return status.
Change-Id: Iebb17fb82c5b3d4b1393e2b3417c766d118c0674
CRs-fixed: 2687777
For agile scan request in 80 + 80 MHz check whether the user given
agile frequency forms a valid 80+80 channel.
CRs-Fixed: 2690964
Change-Id: Ia374333118d4f06861a1cfe0a75db349bca9e879
Revert the change for target_if_vdev_mgr_rsp_timer_cb
from change I760b41b81c006187efb162d410390e1c11878b82.
The change introduced a CFI error because timer
callbacks do not expect a return status.
Change-Id: I7502493b08d1a8bdb847e2c47165880143a6d708
CRs-fixed: 2685628
In the current implementation, Korea is mapped to channel_map_eu.
Korea is mapped to 5G regdomain APL9 which supports 80MHz channels
upto 161. However, the Europe opclass supports 80 MHz channels only
upto 128. As a result, when the AP tries to switch to the 80 MHz channel
149, the opclass validation logic finds this invalid and fills wrong
channel and opclass number in the ECSA IE. This leads the STA to
disconnect.
Fix this by mapping Korea to channel_map_global for Tx, which will map
it to the Global Operating Class by the following logic:
US Op Class Table : Countries having FCC DFS Region Eg: USA , Canada
EU Op Class Table : Countries having ETSI DFS Region Eg: Denmark
CN Op Class Table : Countries having China DFS Region Eg : China
JP Op Class Table : Countries having MKK DFS Region Eg : Japan
Global Op Class Table : All other countries
Change-Id: I5c6ff14888b218bc4fce707335ba53f60f579e19
CRs-Fixed: 2692802
spinlock is not released in one of the exit paths
of target_if_start_spectral_scan function.
Fix it by releasing the spinlock before return.
CRs-Fixed: 2699762
Change-Id: I012c4151b3968ffbedb68eba64b30bc4c08cf44f
The comments for the policy OFFLOADED_PACKETS table do not match
that in the upstream code. Change the comments so that they match
the upstream version.
Change-Id: Ie2a7a3304eb10cc0633070154c581d216fd6e0cb
CRs-Fixed: 2703061
Firmware uses the ESS report element information from beacon. For
roaming, station uses ESS report information to consider next AP.
Hence add support to send ESS RSSI roam trigger reason to firmware.
Change-Id: Id10cd3030d4dffde0bbcc883d582c5ca7e0f1005
CRs-Fixed: 2688520
In monitor mode buffer replenish ring is accessed without
getting initialized for configuring low threshold value.
Add check to avoid uninitialized srng pointer access.
Change-Id: If5dc98d4c1db939ef762749392ec42d46a4ae1f3
CRs-Fixed: 2704586
Add support to populate 11AX wireless modes advetised in ext2 service
ready message. To support older FW that do not advertise this, use
existing host workaround to populate these in host itself.
Change-Id: I3b3b280672592c858bd3f6f0e368909a16bd30ee
CRs-Fixed: 2650136
FW advertises the 11AX wireless modes in service ready ext2 event.
Add a regulatory API to update these modes in regulatory psoc
private object.
Change-Id: I51e781f6819dabf2b98e129a996213a7eecbf8b2
CRs-Fixed: 2650136
Add an attribute QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO to send
additional information to specify whether the OEM vendor command
is for vdev or pdev.
This optional attribute is used to specify whether the device
type is vdev or pdev. This attribute can be omitted when the
command is for vdev.
Change-Id: Ie6f72d071d1d8393d2c9bf47d7b47a9dd2cbbeed
CRs-Fixed: 2693894
Firmware advertises max number of ndp sessions support in
wmi_service_ready_ext2 event. If the firmware advertised value of
max ndp sessions is non-zero, then host uses a minimum of max ndp
sessions of target_resource_config and firmware advertised max ndp
sessions to configure max ndp sessions in firmware using WMI_INIT_CMD.
Change-Id: Ied6891157ce589e5d36a4f8b9694a95b5c819ad6
CRs-Fixed: 2688393
As per regulatory update database xls, FCC4 supports 4.9GHz channels,
as well as 5G channels. But currently only 4.9GHz support is present.
Therefore, add the 5G reg_rules in FCC4's definition to support 5GHz
channels.
Change-Id: Ib71c01635f5aef18c4597ee3f699b5b033087112
CRs-Fixed: 2689729
According to Kernel comment, no one checks the return value of routines:
debugfs_create_u8
debugfs_create_u16
debugfs_create_u32
debugfs_create_u64
debugfs_create_atomic_t
so remove return value of related qdf api.
Change-Id: I7d260bccfce463dddae963c54a776813df116eac
CRs-Fixed: 2666506
rtc_time64_to_tm in defined from kernel 4.0+. Use rtc_time64_to_tm
instead of rtc_time_to_tm from kernel 4.0+.
Change-Id: I6335150300cd4cd7a91d771dd86bf11592d1ff11
CRs-Fixed: 2666521
Add an attribute that can be used with
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION vendor command to
configure different PHY modes to the driver/firmware.
Change-Id: I850fd6a1edaa9e74957b9f189c9b710212902781
CRs-Fixed: 2694060
Whenever a wmi even it received the tlv received from the firmware
will be sanitized, if there is any error the event would be dropped.
This dropping of the event can give side effects in the host/firmware
after some time and making it difficult to find the actual reason of
why the tlv is not received properly.
Crash the system if the tlv is not parsed correctly to debug the issues.
Change-Id: Ic56e3f96252ac74917caeebc8296c2b50ae4f3cd
CRs-Fixed: 2695053
Add support in code to use IS_ENABLED, if CONFIG_ARM_SMMU
config as kernel module.
Change-Id: I64c1e0c7918d520ed36a7a9e22fdf39f66e1c150
CRs-Fixed: 2701645
If wlan logging is enabled then register a notifier block
to kernel's panic notifier chain. Notifier block contains a
callback function to print buffered wlan logs in the event
of kernel panic.
Change-Id: Id8cae651afe45e411e1ddf122c2bc9b5f6688327
CRs-Fixed: 2692163
Configure low threshold for monitor ring only when monitor
vap is created. This is needed to avoid spurious low threshold
interrupts on monitor ring since the low threshold condition always
evaluates to true.
Change-Id: I452c0ada84e0a4f18e410c865d8a6a7f50329aef
Strict NLA validation is introduced from kernel version 4.20 where
NLA_UNSPEC usage is restricted. A new attibute type
NLA_POLICY_ETH_ADDR is introduced for MAC address.
Define a macro to use this if the kernel version is greater
than 4.19.
Also define NLA_EXACT_LEN as NLA_UNSPEC for kernels less
than 4.20.
Change-Id: I9d9bee7a12d84ca81b5777ccb417a33f08949203
CRs-Fixed: 2701357
In DP while handling ppdu stats, we call qdf_nbuf_put_tail
and proceed with updating the nbuf data whithout a check on
the return status of qdf_nbuf_put_tail.
If the qdf_nbuf_put_tail API failed, would free the nbuf
and subsequent updates to the nbuf would result in use
after free, which is resulting in memory corruption.
Add check to verify the return status of qdf_nbuf_put_tail
and proceed accordingly.
Also while updating the ppdu stats, ensure the num of users
of ppdu is checked against the max number of users defined.
CRs-Fixed: 2678258
Change-Id: I00b661fdb342d31563506f93abd63673af8ede55
Add new enum in regulatory to hold all current phymodes.
Add a new API to get max allowed phymode which is not more than the
user provided phymode.
This change simplifies the phymode selection process when starting
or updating the parameters of a vdev.
Change-Id: I12c15e357b80faf2f5272800e55179f02755a263
CRs-fixed: 2658290
The following 3 countries will not support 802.11ax:
1) Belarus
2) Russia
3) Ukraine
This change updates the phymode bitmap for those countries.
Change-Id: I8cd293341d82446cfb5f99eb912a925f4f3398b3
CRs-fixed: 2658290
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC
to add and delete TSPEC in STA mode.
The attributes defined in enum qca_wlan_vendor_attr_config_tspec
are used to encapsulate required information.
Change-Id: Ifaba68b6619a3f6b775d2150740e7d6a2645493c
CRs-Fixed: 2686133
sizeof_field is defined from kernel 4.16. So use sizeof_field
instead of FIELD_SIZEOF from kernel 4.16.
Change-Id: I291531ea86499a7c0ba52fbb6607b19dff533111
CRs-Fixed: 2666512
Define QCA vendor attributes for SET(GET)_WIFI_CONFIGURATION to
dynamically configure capabilities for TX A-MSDU and RX A-MSDU.
Change-Id: Idcf7de2172cbf0b6710a7256b925939a2321e91c
CRs-Fixed: 2687224
Configure the client as isolated peer if part of isolation
list while creating/associating the node or adding the peer
to the isolation list.
Do not forward the packets to and from clients in isolation
list instead accelerate to upper stack.
CRs-Fixed: 2689868
Change-Id: I67fd4dee0fb76c993746cdd66c70c241d407239a
ic_irqnum saves the irq number given by platform,
existing max irq which can be saved per ce is 255,
if platform return irq greater than 255, value is
misinterpreted with that saved in a byte, this will
eventually have problem when host driver suspends/stop,
during which freeing irq will fail.
But in scenarios such as IPI mechanisms such as whunt,
since free irq fails, it would still assume irq is enabled
and call registered handlers, which will lead to
null pointer access.
Inorder to fix this changed data type to uint16_t.
Change-Id: I0d92f965462a0a6416ee3dce880c4218e5ab09e8
CRs-Fixed: 2700577
Update return type of wmi_discard_fw_event to return QDF_STATUS
to match scheduler_msg_process_fn_t.
Change-Id: Iba2d41c4bab2bfd5fb163d82fca6c6b895e5a2a4
CRs-fixed: 2699644
Add sanity check in function target_if_init_spectral_capability
to avoid null-ptr-deref read issue.
Change-Id: Iccd79051ee8294f421704eadbedf6c9d9bf9a7b9
CRs-Fixed: 2692688
Add an attribute QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED
to get the response for the queried data.
Change-Id: Icb3fc7072cf589cf60a7c68b7c1fa74e51dadab8
CRs-Fixed: 2699102
Update the wifi_pos_send_rsp function pointer cast to have the
same parameters as the actual function pointer.
Change-Id: I7e9f5f9972fe96f74c76ffb0fa069a93c98db72b
CRs-fixed: 2685627
In the current implementation the max_5g_bw was hardcoded as 160 MHz
in reg_get_max_5g_bw_from_regdomain, as this information was not
available in regdomains_5g so far.
However, the regdomains_5g table has been updated to make the maximum
5G bandwidth supported by the regdomain available. Hence updating this
information.
Change-Id: I9b9aea9a81b6b0d6f590c266e49a6b4ca3a9e32c
