Avoid memory fragmentation that happens during
attach-detach flow.
- Reuse transmit allocated static pool memory across soc up/down.
These memories are allocated during soc attach.
- Reuse DP source ring memory, DP soc context, DP pdev context
across soc up/down.
- Reorganise structure members of DP soc and DP pdev so that
we can zero out structure members across soc up/down
- Add cdp soc init/deinit and cdp pdev init/deinit that
will be active across soc up/down
Change-Id: I5732453f617bdc16995fda916b645c41845c3ecb
The ack_rssi_valid flag to set to 1 only when completion_status
value is 0 which shows that the TX was successful.
Change-Id: I9e520422995e374d7d35b9db0c060d1fce2f9067
Calculate last_per based on unicast packets and success packets
in last one second
Change-Id: I8b469e5d9c1e40498b3267bf7bdf3149159bdc31
CRs-Fixed: 2343479
Replace ol_if interface with WDI for dp stats updation to upper layer.
Define a new CDP API to get radiostats.
CRs-Fixed: 2326789
Change-Id: Ieaee2fe18fc9a0ad0e259e36f59529fe9bc4e208
Avoid processing tx rate stats if STATS_USR_RATE_TLV is not processed
in htt_ppdu_stats
Change-Id: Icce8ca0b351ae1ae784ba605d1d984dcdd033715
CRs-Fixed: 2316130
Support Monitor Mode for QCA6390 as RXDMA1 block is
now removed.
1. Monitor buffers are now received on rxdma_err_dst_ring
2. RXDMA1 monitor status ring is moved to RXDMA0 monitor
status ring
3. Msdu link descriptors are now returned to WBM descriptor
release ring.
4. Reap the Monitor buffers and return it to SW Refill ring.
5. Use the same rx descriptor pool for regular and monitor data.
Change-Id: If41e5d13f942da2b97e5aab72b88ae344925ba67
CRs-Fixed: 2297300
- Support to pass IPA enabled(disabled) flag from ini to DP layer
- Use ioremap call to translate tx_comp_doorbell_paddr obtained from
calling ipa_setup api to tx_comp_doorbell_vaddr. This is needed to
write the initial value of HP at the doorbell address.
- Change REO_DST_RING_SIZE and WLAN_CFG_TX_RING_SIZE to 1023
for napier/hastings if IPA is enabled. This is needed because,
ipa_setup API can handle only 16-bit values for the size param(bytes)
of the ring.
- Disable hash based flow steering for SAP peers in case IPA is enabled
and set default reo_dest_ring_4 as default RX ring. Since IPA will be
reaping RX packets from reo_dest_ring_4 only, flow steering is not
needed for SAP peers.
- Unmap pre-allocated TX buffers for IPA in the TX completion ring.
- Donot execute IPA functionality if IPA is disabled from ini.
Change-Id: I6855bfe293a457ccc0abd1ad5567f5c95232a9d2
CRs-Fixed: 2183519
1. Address out of bounds array access while
populating mcs rates.
2. Use cdp_sec_type enum inplace of htt_sec_type
for common code.
Change-Id: I0ae1e0acaf7422e73dc26befc9f066f3f424ec6b
CRs-Fixed: 2327153
In dp_get_vdev_from_soc_vdev_id_wifi3 add vdev list lock
while traversing through pdev->vdev_list
Change-Id: I24652a7a65247625b3a6da092476287bf8560e1b
CRs-fixed: 2323655
Currently peer reference is used with out taking any ref count.
In parallel context execution on different core peer reference may
be cleaned up in peer unmap event. So take ref count while using
the peer reference and decrement after done with it.
Change-Id: I02ca172cbdc4309fabd3bbbad00940826662bbd3
CRs-Fixed: 2301963
Host changes to enable HTT version 2 messaging for
PEER map and unmap in FW and changes to handle these
messages in host
Change-Id: Ifbe478212bbbc9c9ea1c1e4791c7a78407c376cc
Set monitor direct filter when smart monitor is
enabled. Deliver header from NAC if md bit is set
and smart mesh feature is used.
Change-Id: If1ef865e013c21bbb58bcb89a87856b12d6c7278
Crs-fixed: 2246660
Currently gi value was not considered for ratekbps calculation
if sgi is enabled, include gi parameter for ratekbps calculation
Change-Id: Idd8b36375493c26f22f2f4f0c7ae922df37e65a1
Peerid 0xffff is for scan peer and rate information needs to
be delivered using valid user index from API dp_get_ppdu_info_user_index
Change-Id: If200467755c4b18002db221413976624ca66a9c9
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
Disable m_copy/enhanced_stats feature causes the bpr feature disable.
Hence add check for bpr feature status during enable/disable of m_copy
and enhanced_stats.
CRs-Fixed: 2275686
Change-Id: I5592b422823446374ce560fe3653990be4c796b0
macros and fw cmn headers included in hal_internal.h is moved
to a new hal_hw_headers.h to avoid these getting included in hif
layer. Include the new hal_hw_headers.h file
Change-Id: I3390ae9e71ca561d94a265e1fdf4d9354e7b2474
Reverting the change where mgmt ctrl frame buffer was assinged NULL for
NONTLV payload case as this check is handled later in the same path.
Change-Id: Icccfb401fe34da593198bac27650139654021636
CRs-Fixed: 2276923
In existing code, variable used to track mgmt. and control
TLV is getting reset only in success case.
Add change to reset it appropriately.
CRs-Fixed: 2248313
Change-Id: Ieac5dc215f441b0530013ea1e36abcba19294754
structures
Rename osif_pdev to ctrl_pdev and os_if_vdev to ctrl_vdev in dp_pdev and
osif_dev structures respectively which are
pointing to objmgr_pdev and objmgr_vdev structures to maintain
uniformity
Change-Id: Ida95a1a90ea74513573f00c652338baee3df897a
CRs-Fixed: 2241362
This change required to match Tx PPDU BW value with
FW stats. As per firmware enums its starts with 5MHz
BW value. So to match 20MHz value with enum zero, need
to subtract from BW populated from TLV.
Change-Id: Ifcc49839c08de78c9200b877890fdce2e0846f1d
Add null check for pdevhandle before processing htt msg.
This is added for polled mode to avoid race between pdev detach
and CE poll timer stop.
Change-Id: I925e70985bd11e05e0679ad0107493aaefe8a273
CRs-fixed: 2352564
In existing code the HTT stats buffer was getting freed after
parsing mgmt. payload TLV, which was leading to missing beacon
metadata.
Add change to continue processing HTT stats buffer even after
receiving mgmt. payload TLV.
Change-Id: Iac67577ea5e362f046a1d5432204362a9559c788
CRs-Fixed: 2248313
Cancel broadcast of probe response if beacon is already sent
in beacon offload.
Change-Id: I4fea51433fbb959e05988c2daac89fbe839b1cdf
CRs-Fixed: 2209282
Address the following issues in the dp folder:
CHECK: 'availble' may be misspelled - perhaps 'available'?
CHECK: 'catagory' may be misspelled - perhaps 'category'?
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'exceded' may be misspelled - perhaps 'exceeded'?
CHECK: 'explicitely' may be misspelled - perhaps 'explicitly'?
CHECK: 'Inteface' may be misspelled - perhaps 'Interface'?
CHECK: 'lengh' may be misspelled - perhaps 'length'?
CHECK: 'messsages' may be misspelled - perhaps 'messages'?
CHECK: 'miscelleneous' may be misspelled - perhaps 'miscellaneous'?
CHECK: 'Ouput' may be misspelled - perhaps 'Output'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'Poiter' may be misspelled - perhaps 'Pointer'?
CHECK: 'psuedo' may be misspelled - perhaps 'pseudo'?
CHECK: 'registerd' may be misspelled - perhaps 'registered'?
CHECK: 'requred' may be misspelled - perhaps 'required'?
CHECK: 'retreive' may be misspelled - perhaps 'retrieve'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'vaild' may be misspelled - perhaps 'valid'?
CHECK: 'virtaul' may be misspelled - perhaps 'virtual'?
Change-Id: I66b9cdc6115dd133b385e60c9d02cefd1bd0bac3
CRs-Fixed: 2241574
Set pdev mask in the HTT Stats request based on
mac id number provided from the user.
Change-Id: Ie8f1208fd3598efd2ea3736719c8b444ef86881a
CRs-Fixed: 2237467
Avoid vdev aggregate stats for every ppdu stats event as it is
consuming high CPU in veriwave max clients testcase. Instead
aggregate the stats when ifconfig athX command is issued. Add
CDP API to aggregate and update stats called when needed
Change-Id: I801d5f8fab0c275942b77a9975293f95bd4026b0
CRs-Fixed: 2220704
Fill htt msg length before the htt stats response
handler so that the wifistats tool can read the
htt msg data correctly.
Change-Id: I544d1b97c8d74a0115a4a5a509780a6e9c273ab7
CRs-Fixed: 2231948
Update function prototype of dp_ppdu_stats_ind_handler. It should be
same when WDI_EVENT_ENABLE is defined and not defined.
Change-Id: I390d35b3b9f5f283fc3b960f00563fb997ef7f95
CRs-Fixed: 2230955
Retrieve length from every htt msg to
parse the tlv's from the htt msg and also
add statistics counters to account for error
packets in Rx path.
Change-Id: I17105174734975dc0d5093c587697346a8ada725
CRs-Fixed: 2214594
The following changes are added for Tx capture/Mcopy mode
1. Append ppduid for FW generated mgmt. frames
2. Append ppduid received in mgmt. TX completion for host
generated mgmt. frames
3. Reuse nbuf received in HTT msg to send mgmt. payload to
upper layers
Change-Id: I073cafa6389ed1ed835cc3ba4b9421b7a4b97d7f
CRs-Fixed: 2185543
Assign num_mpdu to mpdu_tried_mcast for mcast stats updation
Defer bss peer assigning till peer map event arrives
Do not set delete_in_progress for bss Peer
Change-Id: I0881ea3c8804990c336d97cb7b239a991ec64fa9
Add linked list logic to hold all ppdu descriptor status in a list till
all TLVs have been processed
This design handles asynchronous arrival of tlvs from fw per ppdu
Change-Id: Ib8943d7c826c0b441f58f0eaba7ae0bdc0539d9a
Byte counts reported in HTT Tx PPDU indications is sum of MPDU bytes
(including the 802.11 header).In Rx, we derive byte count from per-MSDU
Rx indications and this does not include 802.11 header bytes.
This is causing mismatch in reporting of Tx and Rx byte counts.
Also PPDU TLV for mcast MPDUs is not giving correct multicast bytes count.
Move the byte count update for Tx also to per-MSDU indications to match
the behavior with Rx
CRs-Fixed: 2182576
Change-Id: I92e779661014b058ba98c830881ff8eded4ea6ff
Add htt tx and rx structs from HTT to cdp_pdev_stats.
These Fw tx and rx stats are obtained through HTT events.
athstats application uses cdp_pdev_stats that contains host stats
and fw stats.
Change-Id: Ia063f406bdc6d32a684c4026b8425ecc96faa3db
CRs-Fixed: 2190793
ppdu stats timestamp,duration,channel etc were not
updated and corrected the same
Also RSSI was incorrectly getting updated for
mcast frames also, fix both of the above issues
Change-Id: Id8446c6c0cfe8761f8c524fc7af0ff5bdd8b96aa
1. Assert if length received from FW is not equal to
the expected length
2. Count the number of PPDU stats received by host and
print in "iwpriv athX txrx_stats 260"
3. Optimize the PPDU stats tag mask sent to FW for
enhanced stats enabling
Change-Id: I60019de93bb3914955a03546504efc820c960746
CRs-Fixed: 2170704
When TLVs come from TAC_thread last tlv sent by FW is
HTT_PPDU_STATS_SCH_CMD_STATUS_TLV
and in Tqm thread HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV is the last
TLV to be sent. HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV though can
come either in tqm thread or tac thread based on tid type.
Add change to process HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV when it
comes from tqm thread and pass the populated buffer to the appropriate APIs
Change-Id: I7a064aba4e3c6814b63dcf4bb97cfb3be0194c39
CRs-Fixed: 2180477
pass psoc/pdev object as ctrl pointers to instead of legacy objects.
It introduces new APIs to get feature pointers of psoc/pdev.
DP attach API param modified to pass ctrl psoc (psoc object)
Change-Id: I3d83f28c3e72e5ee984a4220b9d5cf3c4522b501
CRs-Fixed: 2177109
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
