- add support to intialise device region by reading data from
platform to resources.
- add support for iommu_map and iommu_unmap apis.
- allocate a 4K page and send this address through
HFI_MMAP_ADDR register.
- map AON region, send virtual address and size as payload.
Change-Id: I5aa26593309a220c5de62836e432c1bd5a63ba1d
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Added changes to support generic power domain and opp table.
This is an alternative for downstream regulator framework.
power domain can be enabled using below dtsi entries.
power-domains =
<&videocc MVS0C_GDSC>,
<&videocc MVS0_GDSC>,
<&rpmhpd SM8450_MXC>,
<&rpmhpd SM8450_MMCX>
power-domain-names =
"iris-ctl", "vcodec", "mx", "mmcx";
Power domain handles willbe parsed at driver side using below api's.
- dev_pm_domain_attach_by_name()
- devm_pm_opp_attach_genpd()
devm_pm_opp_attach_genpd() provides consumer virtual device handles
and i.e linked to core->dev using device_link_add().
MXC, MMCX rails wilbe powered up by scaling desired rate using
dev_pm_opp_set_rate().
Change-Id: I3d73434cb772078f031aec7cadc2d42ab930edd0
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
update copyright markings to 2023 in all files.
Change-Id: I6842d56c4a8fff6a7a93d0c1d4bc049041297b02
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Use devm_reset_control_get_exclusive_released() instead of
devm_reset_control_get() to get the reset control of video_xo_reset
clock as it is shared reset clock between eva and video drivers.
Use reset_control_acquire() before assert and reset_control_release()
after de-assert video_xo_reset clock to avoid eva driver operating on
it in parallel.
Change-Id: I4936ed7a4556bb56d4b28546084fc877080308ef
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Set mvs0c clock flags (force mem and pheripheral on).
Change-Id: I52380a30a4c74d9658f989377b5c77209cd8a33e
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
introduced core error state and added changes
to refine core state machine.
Change-Id: Ib3b94fd3798e902b7a6cfc5de45820558c89806e
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Poll for AON spare register BIT(0) to become zero before
asserting XO reset from video driver to ensure CVP/EVA driver
is not asserting XO reset around the same time. Asserting
XO reset by both driver at the same time may result in
unpredictable behavior.
Change-Id: I71a0bd0175ef7701c9a855abbf3c2e741d937dfb
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
This is change 2 of the Prepare dependency list without
parent change.
In this change we remove all parent information from
the CAP database.
Change-Id: Ie0b878050ae2d24e3c1a41cbd579ef0f19d42250
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Remove addtional mvs0c clock reset which is not
required from power off sequence
Change-Id: I2077cb0ceee6451cd2d2af067ac8a7be3335dd16
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Introduce core->sub_state similar to inst->sub_state.
[1] pm_suspended - moved to this substate in case of PM suspend
[2] handoff - moved to this state after successful
handoff_regulator call.
[3] fw_power_control - moved to this state in case of IFPC.
[4] power_enable - will track core power_on/power_off status.
[5] page_fault - used to rate_limit fault logs.
[6] cpu_wd - indicates hw fired wd interrupt.
[7] video_unresponsive - moved to this state if sync cmd fails.
Change-Id: Iceb65cf404fd93aff7846860b0276307e4eab570
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Move adjust/set control functions to common/platform.c as part of
upstream effort.
This is part 1 of the change.
Change-Id: I8c440740fe785b5b052c4d44963ea34c21419fa4
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Add assert and deassert axi and mvs0c resets to
avoid video hardware unresponsive issues due to
multiple power collapse sequence execution.
Change-Id: I25ec99eab6b50111161ec9486ea1155bee63f7fc
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
- Add assert and deassert reset control functions to
update power off sequence in pineapple chipset
- Rename clock names to match with clock macros
Change-Id: Ic6dc0daac8110597bfcb02cceba94d2b97548723
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
1. Allow turbo for HEVC 10bit all intra decoding;
2. Add 25 percent extra to VSP cycle for HEVC
10bit all intra decoding;
Change-Id: I794b2a896f7e9444c8979abdb15b8e673a5270ee
Signed-off-by: Zhongbo Shi <quic_zhongbos@quicinc.com>
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
if PC fails for 10 times then video driver is treating that situation
as fatal and doing force core_deinit(), in this case firmware will not
follow vcodec power_collapse sequence and if there any pending
transaction from any session it will cause smmu_fault during next
firmware_boot sequence. Added change to perform vcodec power_collapse
from power_off_iris3_hardware() incase of core_deinit due to PC failure.
Change-Id: I45e32985d87b5cc882c4f96f77d1cabc796e6ba0
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Added call_res_op() macro and used at all possible
places to avoid invalid pointer dereference issue.
Also added changes to cleanup unused functions.
Change-Id: Id77711ad9eaf7b407208567b0fde1f2693588641
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Only keep minimal entries in dtsi, which is essential for
other drivers usage. Move remaining all data into platform
resource file.
Remove device_tree dependency and maintain platform_data
to initialize resources like regulators, interconnects,
clocks, reset_clocks, subcaches and context_banks.
Read static data like freq_table, firmware_name, pas_id
also from platform_data instead of from dtsi.
Change-Id: I73a1df10b92c55e55b23e538aea62598a7250ab4
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
1. Update core power down sequence.
2. Update hw power up sequence.
Change-Id: I428869ac92154b23cdbe3f51c7b299fe8a6cc71b
Signed-off-by: Chinmay Sawarkar <quic_chinmays@quicinc.com>
Move clocks, gdsc, bandwidth resources out of venus_hfi and
use the ops in variant and venus_hfi code.
Change-Id: I1be77c9d384f4eef2cb8085b75c39dc3fd3eeb86
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
The operation is not used anywhere, delete it.
Change-Id: I4fe7cd41d63ea1b1e0792de6b3e98757860629d8
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
The init_interrupt op is not used out of variant, lets
remove the op and used the functions directly.
Change-Id: I8f97cf503503b7f30e824843a5bd9d93c702241a
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
On all places ucregion setup is done just before calling
boot_firmware, move setup in boot_firmware op and remove
ucregion_setup op.
Change-Id: I91a9a72d3b88eef91e82e19b9d8629e9731211f5
Signed-off-by: Stanimir Varbanov <quic_c_svarba@quicinc.com>
For some resolutions memory requirement was coming as 4 * yuv_size
and for CQ/RC_OFF it was 8 * yuv_size. With this fix it will be
max 2 * yuv_size (+ 25% for 10 bit). Fix typo in 720P resolution check.
Change-Id: Ib5908f1eef8dca92dac46c5c195cd47ba28a4df4
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Make slice delivery a boolean control instead of menu.
Change-Id: Iedf8e0df882d61e82661c7f557473d3f7b49215a
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Remove the temporary 2-pipe condition for DDR line buffer
write calculation for BW.
Change-Id: I75dba3106f0af9f7a6eb43036f86209202e22d5d
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
During power collapse, video driver would power collapse video
hardware followed by video controller.
While power collapsing video hardware, it may happen that video
firmware has already power collapsed the video hardware, since
it is hardware controlled. For certain cases, like XS WD, it
may happen that video hardware may not be power collapsed by
video firmware. In such scenario, skipping power collapse sequence
of video hardware would lead to unhandled transactions from video
hardware.
There is a power status register which can clearly suggest if the
video hardware is power down or not. Added a check to confirm the
power status of video hardware before skipping or executing the
power collapse sequence for video hardware.
Change-Id: Ibd9cd708a259897262fcc6cab27b26aaf37f1b13
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
8k@30 fps encode has a very low margin for sw/fw at 338MHz.
Hence, increase core clock little bit(5%) to move to the next
corner i.e., 366MHz.
Change-Id: Idebde3c726086ec49d1fb0ca4525953dd3a30ba9
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Certain codecs/use cases require larger COMV buffer sizes to achieve
performance. Introduce a property to set COMV bufcount and calculate
COMV buffer size based on the bufcount.
Change-Id: Ib0ed8afe77708dc453cbcc121bcd8606db637152
Signed-off-by: Mihir Ganu <quic_mganu@quicinc.com>
Internal Buffer(CMD_BUF) size calculation is changed from (3 * 4) to 48
in firmware for H264 decoder. Aligning with same calculation in driver.
Change-Id: I974bca7d2e128cee24bf237b6f9ea606f386031d
Define vidc macros corresponding to private v4l2 macros
defined in v4l2_vidc_extensions.h file in msm_vidc_internal.h
and use the same wherever applicable for successful
compilation of upstream driver.
Change-Id: I2c7b3741d29996beb35b08b9c6dbd88876bb6ca6
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Move the usage of v4l2 macros in helper functions to
avoid compilation issues on upstream kernel with private
codec defines.
Use vidc macros defines in code instead of v4l2 defines
wherever applicable.
Change-Id: I43d7deb4f84c502689ceaec3273803444f30f379
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Move mapping of v4l2 to vidc macros for codec, color format,
color primaries etc to target specific file to restirct the
usage of private v4l2 defines to target specific file.
Change-Id: Ie83968cb944c756e55b6514c496c0b23c5d16413
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
