Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. User
space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425197
Change-Id: I3857d2a605baa2673af333a7a0412f1690b59769
Convert host param id to target param id using arrays
instead of switch case. This enables removal of CONFIG_MCL
compile time macro and use specific macro
ENABLE_HOST_TO_TARGET_CONVERSION for conversions
Change-Id: I223141d47e92521e6600fc0e160ab2deef43d7d2
CRs-Fixed: 2418030
Currently, If invalid pdev_id is passed to
convert_target_pdev_id_to_host_pdev_id it results into Assert.
Fix is to remove QDF_ASSERT(0) in convert_target_pdev_id_to_host_pdev_id.
Return WMI_HOST_PDEV_ID_INVALID if convert_target_pdev_id_to_host_pdev_id
receives invalid pdev id.
Change-Id: Icb6a75c3f3664596fbba4532f5b29ed626ba28f2
CRs-Fixed: 2428787
The target advertises adaptive 11r service capability over
WMI_SERVICE_ADAPTIVE_11R_ROAM. Enable RSO for adaptive 11r
connection only if firmware advertises this service capability.
Change-Id: Iea78b63d19d1177fe092fc9916ddc5280d00de4b
CRs-Fixed: 2441975
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
Host driver sends pmk key over psk_msk buffer on the
wmi_roam_11r_offload_tlv_param fixed param.
For SHA 384 based FT AKMs, the xx_key length will be higher than
32 bytes. So new psk_msk_ext array is introduced at interface
to sent the remaining 16 bytes.
Fill the last 16 bytes of xx_key to psk_msk_ext for FT
sha384 based AKMs.
Also add support for FT-SAE, FT-SuiteB and FT-FILS firmware
service capability also. If the firmware doesn't advertise
support for FT-SAE or FT-SuiteB or FT-FILS, firmware roaming to
that AP will not be enabled.
Change-Id: Ibe64fb346a24962e59ca461c3099270d8766adc5
CRs-Fixed: 2400773
Add command support for NAV register update and
configuration of the threshold value.
Change-Id: Idbdb030f75dc98db652e6b53604a3ceaaff1106b
CRs-fixed: 2389803
The below ini values are added to enhance roaming in firmware:
1. "minimum_btm_candidate_score"
2. "roam_scan_inactivity_time"
3. "roam_inactive_data_packet_count"
4. "roam_scan_period_after_inactivity"
5. "btm_roam_score_delta"
6. "idle_roam_score_delta"
7. "btm_roam_trigger_min_rssi"
8. "idle_roam_trigger_min_rssi"
The values of "roam_scan_inactivity_time" ,
"roam_inactive_data_packet_count" and
"roam_scan_period_after_inactivity" will be sent over the
WMI_ROAM_SCAN_PERIOD wmi command.
"minimum_btm_candidate_score" value will be sent in the
WMI_ROAM_BTM_CONFIG_CMDID command.
The values of "btm_roam_score_delta", "idle_roam_score_delta"
"btm_roam_trigger_min_rssi" and "idle_roam_trigger_min_rssi"
will be sent over the WMI_AP_PROFILE command in new tlv.
Add WMI support to send the introduced ini values to
firmware.
Change-Id: I117ed7490d14730423654513f416115822230486
CRs-Fixed: 2435676
Add wmi service bit: wmi_service_sta_plus_sta_support.
When this wmi service bit is set, firmware shall support simultaneous
connections on multiple STA interfaces.
If firmware doesn't set this service bit and if the host driver
doesn't check this bit before second STA connection, then firmware
shall reject connection by returning failure in VDEV_START_RESP_EVENTID.
Change-Id: I9e20911af5372b651586f25d9f13e4364c672435
CRs-Fixed: 2427202
Many of the fields in struct add_ts_param use camelCase which is
frowned upon by the Linux coding standard, so rename them to be
compliant.
Note that change I829ad0abb864f0a05047894bab9977d8529074dc
("qcacld-3.0: Align with the refined struct add_ts_param") is
interdependent with this change.
Change-Id: I421b670b86a7e1cecbe5a2686efefbbb6c455267
CRs-Fixed: 2433927
Add change to support sending AMPDU/AMSDU custom aggregation
size to FW using converged MLME and target_if framework.
Change-Id: Icf665e3bf30c5ef5903342264e89776611c7774a
CRs-Fixed: 2430278
Currently capability information and RX multicast broadcast
packet count of the connected peer is not getting
cached.
Add support to cache the capability info from assoc request and
RX multicast broadcast packets from FW.
Change-Id: I105e055b1e440852e8e6b508c25e45f79db2d062
CRs-Fixed: 2409521
Fix the typo for PROFILE_IDX and also add WMI macros
for short slot time update under MLME.
Change-Id: I3c09a7f01029af0f075086166be1c85bd1d7de34
CRs-Fixed: 2412160
If both INI and FW capability is set,
enable capability flag in twt enable command.
Change-Id: I1c070256c4b672b09a1323665fc5a2f166f951fb
CRs-Fixed: 2423718
Modify the comment to avoid the use of restricted words in the
wmi_unified_param and service_ready_param
Change-Id: I50f474bdeed6cfdfd05f0c4bff5bb0c0ed56127f
CRs-fixed: 2427333
'hecap_info_internal' has been added to indicate support for 11ax
proprietary PHY features: 400ns SGI support in 1X/2X LTF and 2X LTF
support in 160/80+80MHz modes. Added the corresponding peer assoc
and service ready parameter.
Change-Id: I34ead9278d8d84ecbc5525867f1584f8c8a4d7b8
CRs-fixed: 2414163
Add support to get the various Coex data from the debugfs.
This commit adds the support to get the various coex data:
* COEX STATE
* COEX DPWB STATE
* COEX TDM STATE
* COEX IDRX STATE
* COEX ANTENNA SHARING STATE
The specific state information can be read via the debugfs.
Example to read the COEX STATE logging:
sm6150:/ # echo "1" > /d/wlan/mws_coex_status_info
sm6150:/ # cat /d/wlan/mws_coex_status_info
Reading for command MWS_COEX_STATE.
vdev_id = 0
coex_scheme_bitmap = 0
active_conflict_count = 0
potential_conflict_count = 0
chavd_group0_bitmap = 0
chavd_group1_bitmap = 0
chavd_group2_bitmap = 0
chavd_group3_bitmap = 0
Change-Id: I92272ad7edf44df22730ac0fa992d876840ba632
CRs-Fixed: 2413955
Add the necessary support for peer_extd2 stats in the WMI layer. The
stats contain rx_bytes, rx_err and rx_mpdus
Change-Id: I9f787e28a8e128471489c8f47ac03fef77dae930
CRs-Fixed: 2395636
Add Diag log support for logging cold boot calibration
data sent by firmware via cold boot cal wmi event.
Change-Id: I932fd5f87667498b77ee13ca5b3ce08d6001cdf0
CRs-Fixed: 2413451
Add modules and API's to issue command WMI_NDP_CMDID. This
command, for now, can request Firmware to terminate all NDP's
associated with the given vdev. Add module that extracts
event information from event WMI_NDP_EVENTID. This event acts
as a response to command WMI_NDP_CMDID, and carries NDP
related status information for the host. Extract mac_id from
the updated TLV of NDP confirm and schedule update events.
Add modules and API's to support new NDP command and event.
Change-Id: Ibf6312cb3669b5e62ada3f4ad852be87f14ae09f
CRs-Fixed: 2384535
There are multiple issues with the Link Layer Stats Unified API:
- struct ll_stats_clear_params and struct ll_stats_get_params both
incorrectly use the identifier "sta_id" to refer to a vdev_id.
- struct ll_stats_set_params has an unused "sta_id" field.
- Functions wmi_unified_process_ll_stats_clear_cmd() and
wmi_unified_process_ll_stats_get_cmd() pass the MAC address as a
separate parameter rather than adhering to the commonly used
unified signature: func(handle, param).
- Not all of the functions and data structures are correctly protected
by the WLAN_FEATURE_LINK_LAYER_STATS feature flag.
Refine the Link Layer Stats Unified API to address these issues.
This is co-dependent with Ifd7c8de2358121dae4752525ff57021a32be85d3
("qcacld-3.0: Use the refined Link Layer Stats Unified API").
Change-Id: Ifdc1fada55a559f3b3d0837ec20cceb653c45c40
CRs-Fixed: 2409293
In struct hidden_ssid_vdev_restart_params the legacy identifier
session_id is currently used to identify the vdev of interest. To
align with the converged nomenclature rename this to vdev_id.
This is co-dependent with Ie8c426aff1a8a1e7f75199c8cf7c761f1a893a05
("qcacld-3.0: Use vdev_id in hidden_ssid_vdev_restart_params").
Change-Id: Iea0bf0a3dcae9186cce4eb176b974515fd0d7624
CRs-Fixed: 2403934
Enhance target_if/mlme/vdev_mgr by addressing
review comments and update response handling
APIs to handler timers and response bit maps
as expected
Change-Id: I8a5bf3f2931f0c36a367dfebfc898ed2621f3516
CRs-Fixed: 2397184
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
As part of the TDLS feature, structs sta_uapsd_trig_params and
sta_uapsd_params were replicated from qcacmn wmi_unified_param.h to
qcacld-3.0 wlan_tdls_public_structs.h, and conditional compilation
based upon CONVERGED_TDLS_ENABLE was used to determine which structs
are actually used by a build. Since these structs are not specific to
TDLS, remove the featurization so that the structs from qcacmn
wmi_unified_param.h are always used.
This is co-dependent upon I37b2d80a4710aced158dcf2ea973d15801a7cecc
("qcacld-3.0: Remove UAPSD trigger structs from TDLS public structs").
Change-Id: Ida0f2b6f131ff2dce7217b881ffadecfd685f563
CRs-Fixed: 2395822
Add the WMI PDEV param 'wmi_pdev_param_ul_ppdu_duration' to
add command support to modify the UL PPDU duration.
Change-Id: If2f8ef02d4f992d91fa745599d5c08b1dfccceca
CRs-fixed: 2393139
Add support for UL_RU26 WMI service which will notify the host if
the target has allowed UL_RU26
Change-Id: I639c0872f541cf30776c9f76b87c4b950c1e17f4
CRs-Fixed: 2390350
check for max_ast entries supported by FW and add the
entry on host accordingly.
Change-Id: Ief70ba631bb41d50c79d3673e3eea0c45b0c1e19
CRs-Fixed: 2355947
Added APIs to extract quiet information from swba, which
is supposed to be filled in Probe response.
Change-Id: I3289fc2a9d12294ec841461997db4239d0158398
CRs-Fixed: 2376067
Cleanup WMI to use new data structures in vdev mlme
for corresponding vdev mgmt op
Change-Id: I0126dcb34e569aac2af82de15e0f3362cf5a0a5e
CRs-Fixed: 2383346
Currently the driver uses structure for peer mac address
to store the mac address.
Use the already existing peer mac address array for the same.
Change-Id: Ib49b2ac4747fce3610da73a1d29c67ccaaeaad65
CRs-Fixed: 2390282
The TLV WMI added support for a new WMI_SERVICE_WLM_STATS_REQUEST
service along with an associated WMI_WLM_STATS_EVENTID event, so add
support for a proxy unified WMI service and event.
Change-Id: Ic79c4b757fe2d4e806306750250e3c102745c486
CRs-Fixed: 2388911
Add WMI_HOST_REGDMN_MODE_11AC_VHT20_2G in WMI_HOST_REGDMN_MODE
bitmap.
WMI_SERVICE_READY_EVENT indicates ht/vht capability by
hal_reg_capabilities-> wireless_modes, REGDMN_MODE_11AC_VHT20_2G
indicates 2g vht20, check and save it as
WMI_HOST_REGDMN_MODE_11AC_VHT20_2G.
Change-Id: Idfb9a0f576619d4f890c2c0df68fc903f311c510
CRs-Fixed: 2384269
The sme_session_id field in struct add_ts_param is poorly named since
that is legacy MCL nomenclature, so there is a desire to rename it to
vdev_id to align with the converged nomenclature.
The first phase of renaming introduced a union so that both the old
and new name could be used by legacy projects, but only the new name
was used within the qcacmn project.
Now since all legacy projects have been updated to use the new name,
for the second phase remove the union, leaving behind just the new
name.
Change-Id: Ie86a3c0833899fbeacd458a53d9e23c6a67e7f12
CRs-Fixed: 2384157
The sme_session_id field in struct add_ts_param is poorly named since
that is legacy MCL nomenclature, so there is a desire to rename it to
vdev_id to align with the converged nomenclature. As the first phase
of renaming introduce a union so that both the old and new name can be
used by legacy projects, but otherwise only use the new name within
the qcacmn project.
Change-Id: I93743c3b1e3180589a3af83ed9e51d8dc95324d9
CRs-Fixed: 2384156
The original implementation of the "get link status" feature contains
some design and implementation details that are not ideal, so fix the
following deficiencies:
- The link_status_params struct contains three fields that are unused.
- The only link_status_params field that is used, session_id, uses
legacy terminology instead of converged terminology
- The wmi_unified_link_status_req_cmd() implementation uses a void
pointer instead of the correct underlying type for the WMI handle.
Note that change I508ec083298caa45d4cbb1ba28b21e47e379a804
("qcacld-3.0: Align with revised "get link status" Unified WMI") is
interdependent with this change.
Change-Id: I057ca0aff4a627c7fcdb9f90a5da46473813f60a
CRs-Fixed: 2381364
Currently we have same function name/different implementation when set
wmi scan channel list for WIN and MCL, the implementation for WIN side
send_scan_chan_list_cmd_tlv looks more intuitive which will remain with
minor change.
Remove definition of struct scan_chan_list_params and wmi_channel_param
which is no longer needed. Change HT flag set independent on VHT flag.
Add WMI DFS flag set if channel_param.dfs_set set.
Change-Id: I131ca09c12687bda5eb3eb03b7bcca1d62ac7aa9
CRs-Fixed: 2363675
Change Ie6c4a9847f2daa9ba2aebd17f386d584201b86d6 ("qcacld-3.0: Remove
obsolete set/reset ssid hotlist") in the qcacld-3.0 project removed
the only client of the WMI SSID hotlist infrastructure. Since this
infrastructure is obsolete, remove it.
Change-Id: I4a1de39c982947bbf4958d976426f95e3217f1a3
CRs-Fixed: 2381277
