Add host WMI support for EAPOL minrate resource configuration.
Through the use of the global.ini configuration parameter -
eapol_minrate_set and eapol_minrate_ac_set, the user can set EAPOL
frames to be sent in minimum rate in tunnel mode. In addition to
this, the user can also select between the 4 ACs (BE, BK, VI, VO)
to send the EAPOL frames.
The changes are reflected in the target resource config which
is sent to the firmware.
Change-Id: Ib9a264b64305bf43708c3c2af3ff254b6cc28477
CRs-Fixed: 2298020
because of a HW issue we no longer get the MAC address in
the MEC event notifier, As a WAR we now will be reading the
source MAC address from the nbuf data instead of status word
CRs-Fixed: 2324772
Change-Id: Iab8dc346b9a2108e4cb107fb61d242700a084223
Update WMI_NDL_SCHEDULE_UPDATE_EVENTID handling for possible out
of bounds read when fixed_params->num_channels is greater than
TLV length of NDL channel list or NSS list and fixed_params->
num_ndp_instances is greater than TLV length of NDP Instance list.
Change-Id: Idbd74e30868597c9787095372516b7d7dd12481b
CRs-fixed: 2327673
Update handling of WMI_NDP_CONFIRM_EVENTID for possible out of
bounds read when fixed_params->num_ndp_channels is greater than
TLV length of NDP channel list or NSS list
Change-Id: I3bf429a47c46edbb464cf8447f227f7baa74fbe3
CRs-fixed: 2325849
NDP ids copied from NDP instance id array for NDP
end request does not use nla_data to copy the ids
resulting in incorrect data getting copied.
Fix is to use nla_data for NDP instance id array to
copy the ids.
Change-Id: I74795367a5c5a57f42cb1a67ece9cebfeb259b71
CRs-Fixed: 2328245
In macro TAILQ_FOREACH_SAFE, var and tvar point to current head and the
next element respectively. If we unlock the spinlock inside the for loop
and then lock it again, there is a chance (race) that the next element is
pointed to by another thread of execution and both of them may try to
remove the same element at the same time. This may lead to panic.
Instead of using TAILQ_FOREACH_SAFE macro remove the element from the list
one by one using a while loop from the head of the list. Do not lock the
entire while loop, instead lock only during the removal of element from the
list.
This is required because we want to wait for the dfs_remove_from_nol timer
to complete. But the wait should not be done from inside the lock because
the same lock is used by the dfs_remove_from_nol timer.
Change-Id: If820dbb1789b7fcfc33c133b3f90968377bfbf3c
CRs-Fixed: 2322831
In preparation for QDF timer tracking, return QDF_STATUS from
qdf_timer_init(). This allows callers to handle the eventual possibility
of a QDF timer init failure.
Change-Id: I9da4643610099d32b002bda9218af26247a4edc6
CRs-Fixed: 2327724
Currently the driver calculates the nss score
based upon the max capability of the AP, and not the
hw_mde config which would be there after connection
for example, the driver calculates the score for a
2x2 11n AP, and 1x1 VHT (11ac) AP, it connects to the
11n AP in 1x1 mode, if a concurrent connection is
present, which affects throughput
Fix is to check whether the current AP channel results
in DBS or not, if yes then change the NSS to 1 instead of
2
Change-Id: I80e2af00044b760325eb1a51b09a45189d58a417
CRs-Fixed: 2271976
With the new serialization code, the older instances of code,
where the queue traversal to find matching cmd was done
from the public API was replaced with wlan_serialization_find_cmd API.
However, there was an instance where the list traversal was done from
the public API and is now replaced with wlan_serialization_find_cmd API.
Change-Id: Idc37f2bdd52cedc578b30a71517c9e57453f25d0
CRs-Fixed: 2312992
Because of a HW issue we have added a WAR where we do
learning even on destination MAC address. This will ensure
da_is_valid even for forwarding traffic and HW will cache
this entry for subsequent pkts there by we achieve better
throughput in UL.
Change-Id: Ib61693e9ce52b3a1cdcd4c34eabb3d8368b1ef13
For generation 3 spectral reports for the 80 MHz segments
come as part of different events. To deal with this a
state machine is added to report handler. Noise floor
value of the lowest chain in the chain mask is populated
in the SAMP message.
CRs-Fixed: 2236331
Change-Id: Ie24426449cf8503c9d7f7c30ca617a6697ca2b5e
In the existing converged component, WMI TLV APIs are implemented in
a generic manner without proper featurization. All the APIs exposed
outside of WMI are implemented in wmi_unified_api.c and all the APIs
forming the CMD or extracting the EVT is implemented in wmi_unified_tlv.c.
Since WIN and MCL have a unified WMI layer in the converged component and
there are features within WIN and MCL that are not common, there exists a
good number of WMI APIs which are specific to WIN but compiled by MCL and
vice-versa. Due to this inadvertent problem, there is a chunk of code and
memory used up by WIN and MCL for features that are not used in their
products.
Featurize WMI APIs and TLVs that are specific to WIN
- Air Time Fareness (ATF)
- Direct Buffer Rx (DBR)
- Smart Antenna (SMART_ANT)
- Generic WIN specific WMI (AP)
Change-Id: I7b27c8993da04c9e9651a9682de370daaa40d187
CRs-Fixed: 2320273
Currently, every message which is logged to console is logged at the
same level. Instead, log each message using an appropriate pr_* API
based on the log level of the message being logged.
Change-Id: I0638f3ab155576ed87d663a4b060d16969cf816c
CRs-Fixed: 2327148
The existing Beacon offload control WMI command is used
to control beacon tx to intimate FW for a VAP the beacon
is suspend or resume.
Added API for non tlv to send WMI_BCN_OFFLOAD_CTRL_CMDID
command to FW.
Change-Id: Ia02f4c7f317460ab766ca765bab14e0cd7acd879
CRs-Fixed: 2269491
NAN vdev ref count incremented as part of end_ind handler
is not released which will result in the nan vdev not
getting physically deleted.
Fix is to release nan vdev ref in os_if_ndp_end_ind_handler.
Change-Id: I31a32fa241fb9e86d3a64d490722bc42905970c4
CRs-Fixed: 2325580
Delete print "failed to post to QDF_MODULE_ID_SCAN" as it doesn't
gives any useful info. How many times failure has happened can be
read from __sched_dup_fail_count.
Change-Id: Id4ec411d5a32f09c971330e860b50d1a91e7c70b
CRs-Fixed: 2326611
Async task thread will claim sdio bus, this claim action will
keep sdio clock on.
During system suspend, after mmc controller suspended, wlan
claim sdio, then it will cause mmc exit suspend as it found clock is on.
Move this claim action before bus transaction to avoid rebundant claim.
Change-Id: I3bab449d0a93c9107c455ee7dbcc6df99ca28636
CRs-Fixed: 2299526
For more than one registered mgmt rx callbacks, we clone the
mgmt rx buf and call each rx handler. We need to check the return
type of qdf_nbuf_clone before we call the regsitered handlers.
Change-Id: Ic8513fc51954fb88c80ae6822e0fa45e34bcf12c
CRs-Fixed: 2322631
Add support to process HTT completions sent by FW for multicast/broadcast
frames sent in TQM bypass
Change-Id: If3fca3384156ce93f719bf15ef14b98ea4974f92
CRs-Fixed: 2301453
Currently the driver doesn't have a check to bring
up a SAP on STA SCC channel if its a SRD channel
and does force SCC on it, even if SRD master mode
is not supported.
Fix is to check the SRD ini before SAP bringup
on the STA channel.
Change-Id: I850d8b252afb20d9e4374e1fb4932d7ef17f3e51
CRs-Fixed: 2302742
Due to change in Opclass calculation in the new
regulatory component invalid opclass is returned for the
TDLS component. Update arguments to calculate opclass correctly
to regulatory component.
Change-Id: I062bbb55d283f9525da241d32177e26d07aa8590
CRs-Fixed: 2325834
In order to triage latency issues in the scheduler thread, track which
queue a message was queue in, when each message was queued, how long it
spent in queue, and the depth of the queue at the point of insertion.
Change-Id: I83edd04e668d5a2674ca71495fc904092b3ab800
CRs-Fixed: 2322561
Functions hal_rx_wbm_err_info_get, hal_tx_comp_get_release_reason,
hal_rx_dump_mpdu_start_tlv uses some hardware macros directly and the
value differs between qca8074v1 and qca8074v2 targets.
Move these functions to generic api file and compile it per target.
Change-Id: Ib78fb6e69238577aac64da3f60f38a72cee316b0
keep hal tx and rx functions grouped as it will look clean
and avoid confusions while browsing code for others.
Change-Id: I519690d42cd077689bf7afe697908f43d7055da5
Reset the self_ast_entry in peer to NULL when self_ast_entry is deleted
to avoid use after free or double free conditions
Change-Id: Ic1779e35cbd98ddc0333808152e4c388449a45af
CRs-fixed: 2321768
Use pr_info for wlan driver console logging such that its
backward compatible with qcacld-3.1 and by default info log
levels are not logged on console unless kernel's printk current
console log level is changed to print info logs as well on console.
Change-Id: I33ca583743a9b77253390abcece6c8067f38c35d
CRs-Fixed: 2326304
Current wifi driver breaks tasklet storm by scheduling a work
whenever wifi driver tasklet reschedules itself to avoid excessive
tasklet storm and wd barks as a side effect. Remove work scheduling
from tasklet reschedule such that tasklets can be rescheduled as
fast as possible and reap CE rings as fast as possible and let linux
kernel handle the tasklet storm by bringing in ksoftirqd as needed.
Change-Id: I985369f534c09903b2d269f858adb88640e4fd2f
Crs-Fixed: 2325935
Implement per access category flow control. Make sure lower AC
traffic, such as BE, will not starve higher AC, such as VI and VO,
traffic inside a single vdev.
This change is part of FR49094
Change-Id: I6aa15832eb48e8f3ada00eb29a7bc00999edaafd
CRs-Fixed: 2304436
Protect sap restart work handler from SSR to avoid accessing
data structures which are freed already.
Change-Id: I75d2032b022aa68817ec102cbe65f635a627eb82
CRs-Fixed: 2325966
Fix the possible out of bound access while processing the
channel avoid frequency event from FW.
Change-Id: Ib49df0ebd785944b7cbbfa5927613887dd35d9ff
CRs-Fixed: 2308629
Potential NULL pointer dereference of handle in
target_if_nan_deregister_events. Add null check
in the function.
Change-Id: Ie30720b525c457e6c805bd0d212044be9270bd53
CRs-Fixed: 2323349
Add bound check rssi_event->num_per_chain_rssi_stats in
extract_all_stats_counts_tlv().
ev->num_chain_rssi_stats in
target_if_cp_stats_extract_vdev_chain_rssi_stats()
is derived from rssi_event->num_per_chain_rssi_stats
and is used as limit in for loop.
As length was never checked multiple qdf_mem_copy calls in
wmi_extract_per_chain_rssi_stats() used in
target_if_cp_stats_extract_vdev_chain_rssi_stats()
will result in an OOB issue.
Change-Id: I204744e1435e687e33f2165744a92cdb8b975a51
CRs-Fixed: 2322298
DFS chan "state" will be set to CHANNEL_STATE_DISABLE
if the dfs chan is added to NOL.
Add the new API wlan_reg_chan_has_dfs_attribute
to get the attribute from "chan_flag" which keeps
the chan's initial dfs attribute.
Change-Id: I5149d958c0dcb1e5909e02bd5be9acdf9fca7f2f
CRs-Fixed: 2324648
