Add support back for wsa analog codec driver files.
Change-Id: I7ef6ad050b068ec8c0f0275089d670c92234686d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
During SSR, codec device will be down and wait till
receiving up notification before doing any register
reads or writes.
Change-Id: I0e2967990bfc9d0d780d4c7e666a4c31159e70ce
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
exit irq handler gracefully if soundwire clock request
fails, so that soundwire registers are not accessed
without clock.
Change-Id: Ic2c9162e49901c7d5c876115f386d0a5a00fd691
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
V-Validation is not working due to different
size for cal_data and data_size. This is expected as
same callbacks are used for ftm and v validation.
Change condition to ensure data_size is less than
or equal to size of cal_data.
Change-Id: I78b4e6778de9cfa5f95830fc6d48b84e608ba3a5
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
TX clock is needed for setting up or tearing down
VA path. while voting and unvoting for TX clock,
keep track of the votes to unvote only if it was
voted from VA widgets.
Change-Id: Ia013517ed8d932ed3a5242bb7d052c1ee314fdbe
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Changing auto suspend timer to default value without checking module params
is causing audio touch tone to hold CX out of power collapse longer.
Instead set another variable to change autosuspend delay during
swr clk request failed.
Change-Id: Ia85c4ebeea020221c8f385006543a95c69d9124e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Observe pop if FS clock is turned on at end of
powerup sequence. Ensure WSA PA is turned on
after FS clock to avoid pop.
Change-Id: Ic1214d361e77db252b7a90a89fc99c69f51e270b
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Register for a callback for ssr notification
and turn off PA at pre-ssr to protect speaker
from any turning off damage during ssr.
Change-Id: I286d9bdcbcba9561424a8f0d4a1e99a8492caf08
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add adsp ready check before accessing avtimer registers in
order to avoid NOC errors on these registers during SSR/PDR
usecases while querying offset.
Change-Id: I9246302f01906ab35095c76f729ea082b9756cc5
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Audio mute is observed if record is started as soon as headset
is inserted. This is because hold time after button release is set
as 800ms causing the delay. Change hold time to 200ms to fix this issue.
Change-Id: I98028fca3412a3d47ad8e5154f25ff1726426955
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Apps is not able to enter into power suspend mode.
Adding lineout booster widget to ignore suspend
Change-Id: I220ff46465e0ad3d2b6852933e00331c055a26d6
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
There is race condition around private data used in put() and get()
of few mixer ctls with close() callback. Added global mutex lock and
code changes to protect such critical section by accessing such lock.
Change-Id: Ic160b0c7c29d0ea5d517b3bacc53828d8d61e085
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
soundwire tx data gpio is wakeup source capable. Disable the
interrupt capable during voice activation usecase to let the
device enter into power collapse during voice activation usecase
on headset.
Change-Id: I64a0b5da249dd3da37310fb80909a0ac5fefae54
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Use proper dev handle in print to avoid compile error.
Change-Id: Ieca116199ec4c86f2ee8c1698285fff0ecababbf
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Lito has three data lanes for tx swr. As gpio support
for swr tx data3 is present for lito v2, enable data
lane for lito v2.
Change-Id: I56faee1974f59e0a506fc74f2dadb95a52071907
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Under same pinctrl node, there are multiple gpios that
require MPM wakeup to be disabled. Update driver logic
to support disable of multiple gpios under same node.
Change-Id: I3a07e5d7621da4cd03b46d96ca5cec18958f1ebd
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Few mixer controls _put and _get methods uses runtime private data
that can be freed by close() callback in parallel threads leading
to issue. Added global mutex lock in such methods to avoid runtime
concurrency around such data.
Change-Id: Ie542c64a4f1e50fd9547ebb9f65df2b7b0c21a0e
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
