Add the necessary support for peer_extd2 stats in the WMI layer. The
stats contain rx_bytes, rx_err and rx_mpdus
Change-Id: I9f787e28a8e128471489c8f47ac03fef77dae930
CRs-Fixed: 2395636
Convert pdev and vdev param conversion array to pointers
and allocate them only if conversion is required.Use run-time
NULL check of pdev and vdev param pointers for conversion
and remove CONFIG_MCL compiler flag.
CRs-Fixed: 2393422
Change-Id: Ica1c81f5f3c3a4b7e31dcb70c63471898c36933d
Add Diag log support for logging cold boot calibration
data sent by firmware via cold boot cal wmi event.
Change-Id: I932fd5f87667498b77ee13ca5b3ce08d6001cdf0
CRs-Fixed: 2413451
Add modules and API's to issue command WMI_NDP_CMDID. This
command, for now, can request Firmware to terminate all NDP's
associated with the given vdev. Add module that extracts
event information from event WMI_NDP_EVENTID. This event acts
as a response to command WMI_NDP_CMDID, and carries NDP
related status information for the host. Extract mac_id from
the updated TLV of NDP confirm and schedule update events.
Add modules and API's to support new NDP command and event.
Change-Id: Ibf6312cb3669b5e62ada3f4ad852be87f14ae09f
CRs-Fixed: 2384535
There are multiple issues with the Link Layer Stats Unified API:
- struct ll_stats_clear_params and struct ll_stats_get_params both
incorrectly use the identifier "sta_id" to refer to a vdev_id.
- struct ll_stats_set_params has an unused "sta_id" field.
- Functions wmi_unified_process_ll_stats_clear_cmd() and
wmi_unified_process_ll_stats_get_cmd() pass the MAC address as a
separate parameter rather than adhering to the commonly used
unified signature: func(handle, param).
- Not all of the functions and data structures are correctly protected
by the WLAN_FEATURE_LINK_LAYER_STATS feature flag.
Refine the Link Layer Stats Unified API to address these issues.
This is co-dependent with Ifd7c8de2358121dae4752525ff57021a32be85d3
("qcacld-3.0: Use the refined Link Layer Stats Unified API").
Change-Id: Ifdc1fada55a559f3b3d0837ec20cceb653c45c40
CRs-Fixed: 2409293
In struct roam_scan_filter_params the legacy identifier session_id is
currently used to identify the vdev of interest. To align with the
converged nomenclature rename this to vdev_id.
This is co-dependent with Ibeab45d4badbeda6baec6a53ab4ec561dd70ccd9
("qcacld-3.0: Use vdev_id in roam_scan_filter_params").
Change-Id: I16679abc7b3b61e6814fc1b0f13c6bc0e0fb7a39
CRs-Fixed: 2407402
The unified WMI struct used to support the STA keepalive feature has a
few flaws:
- It is poorly named. Struct sta_params is a very generic name for a
struct that has a very specific purpose.
- It is poorly designed. It utilizes pointers to the IPv4 and MAC
addresses rather than support having those addresses within the
struct itself. This prevents the struct from completely representing
the payload, which is required if we want to utilize this struct in
the converged UMAC.
To resolve these issues rename and redesign the struct.
This is co-dependent with I20cf9f54a7ec920a90575ffd73c51708414d46a0
("qcacld-3.0: Use the redesigned STA keepalive interface").
Change-Id: I2a401fa6934f05555cb3c30088af62cfbc9a3c59
CRs-Fixed: 2404895
In struct plm_req_params the legacy identifier session_id is currently
used to identify the vdev of interest. To align with the converged
nomenclature rename this to vdev_id.
This is co-dependent with I3c5192d31caa05c8fe7157382680318b6671257f
("qcacld-3.0: Use vdev_id in plm_req_params").
Change-Id: I1554febcfb641059a82349aad904c54b62250111
CRs-Fixed: 2405067
In struct roam_offload_scan_rssi_params the legacy identifier
session_id is currently used to identify the vdev of interest. To
align with the converged nomenclature rename this to vdev_id.
This is co-dependent with Ifb2282b8977ad1fb999e8460c0d276343793a0c6
("qcacld-3.0: Use vdev_id in roam_offload_scan_rssi_params").
Change-Id: Ifbbca30b9aca9688931ac0f4e4f703c28ad0ad32
CRs-Fixed: 2404094
In struct rssi_monitor_param the legacy identifier session_id is
currently used to identify the vdev of interest. To align with the
converged nomenclature rename this to vdev_id.
This is co-dependent with Icf5d5797eed143837c57a2b7d9a6c9b1b63387e9
("qcacld-3.0: Use vdev_id in rssi_monitor_param").
Change-Id: I6087c5018af98a84e7e784527000448ace7fac6e
CRs-Fixed: 2404081
In struct hidden_ssid_vdev_restart_params the legacy identifier
session_id is currently used to identify the vdev of interest. To
align with the converged nomenclature rename this to vdev_id.
This is co-dependent with Ie8c426aff1a8a1e7f75199c8cf7c761f1a893a05
("qcacld-3.0: Use vdev_id in hidden_ssid_vdev_restart_params").
Change-Id: Iea0bf0a3dcae9186cce4eb176b974515fd0d7624
CRs-Fixed: 2403934
Enhance target_if/mlme/vdev_mgr by addressing
review comments and update response handling
APIs to handler timers and response bit maps
as expected
Change-Id: I8a5bf3f2931f0c36a367dfebfc898ed2621f3516
CRs-Fixed: 2397184
In struct gateway_update_req_param the legacy identifier session_id is
currently used to identify the vdev of interest. To align with the
converged nomenclature rename this to vdev_id.
This is co-dependent with I2d24a54e80931a944580e968a841679d2da7b2a1
("qcacld-3.0: Use vdev_id in gateway_update_req_param").
Change-Id: I84b28aa734b570f0a7834fbac7d27e9c66b8b026
CRs-Fixed: 2404012
As part of the original TDLS componentization the legacy typedef
tTdlsPeerStateParams was replicated as qca-wifi-host-cmn struct
tdls_peer_state_params. Subsequently when the TDLS component was
relocated back to qcacld-3.0 this struct was replicated again as
struct tdls_peer_update_state in the qcacld-3.0 TDLS public structs.
Unfortunately this left the driver with three different data
structures which serve the same purpose. Not only is this pointless,
but due to the way in which these structures are used there is an
implicit requirement that they be exactly identical. Further
complicating matters is the fact that these three structures each have
embedded structs which are also replicated. This approach is very
fragile since any change to any of these structs must be replicated
across the entire set. To align with the converged software
architecture and to improve code maintainability exclusively use the
TDLS public structs.
Change-Id: Ifc976815fea57afae86cc91b91c6b48f70b2a9a7
CRs-Fixed: 2395340
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
As part of the TDLS feature, structs sta_uapsd_trig_params and
sta_uapsd_params were replicated from qcacmn wmi_unified_param.h to
qcacld-3.0 wlan_tdls_public_structs.h, and conditional compilation
based upon CONVERGED_TDLS_ENABLE was used to determine which structs
are actually used by a build. Since these structs are not specific to
TDLS, remove the featurization so that the structs from qcacmn
wmi_unified_param.h are always used.
This is co-dependent upon I37b2d80a4710aced158dcf2ea973d15801a7cecc
("qcacld-3.0: Remove UAPSD trigger structs from TDLS public structs").
Change-Id: Ida0f2b6f131ff2dce7217b881ffadecfd685f563
CRs-Fixed: 2395822
Add the WMI PDEV param 'wmi_pdev_param_ul_ppdu_duration' to
add command support to modify the UL PPDU duration.
Change-Id: If2f8ef02d4f992d91fa745599d5c08b1dfccceca
CRs-fixed: 2393139
Add support for UL_RU26 WMI service which will notify the host if
the target has allowed UL_RU26
Change-Id: I639c0872f541cf30776c9f76b87c4b950c1e17f4
CRs-Fixed: 2390350
check for max_ast entries supported by FW and add the
entry on host accordingly.
Change-Id: Ief70ba631bb41d50c79d3673e3eea0c45b0c1e19
CRs-Fixed: 2355947
Added APIs to extract quiet information from swba, which
is supposed to be filled in Probe response.
Change-Id: I3289fc2a9d12294ec841461997db4239d0158398
CRs-Fixed: 2376067
In son_ol_send_null(), check for the return value of
GET_WMI_HDL_FROM_PSOC() before using it.
Also, pass argument of type wmi_unified_t in calls
to wmi_unified_stats_request_send().
Change-Id: Idfedae2fcbde6d18b1829adefcabac0adbc55859
CRs-Fixed: 2371368
Cleanup WMI to use new data structures in vdev mlme
for corresponding vdev mgmt op
Change-Id: I0126dcb34e569aac2af82de15e0f3362cf5a0a5e
CRs-Fixed: 2383346
Populate Spectral capability structure with scaling parameters
from extended service ready event parameters. Send the spectral caps
via cf80211 interface.
CRs-Fixed: 2379652
Change-Id: Id0372bdd40843c2101df32d2e71920027a24909f
Extended service ready event has a tlv
containing the spectral bin scaling parameters.
Populate the spectral capabilities using this info.
CRs-Fixed: 2379652
Change-Id: I0b4648302e7170b5965cf1aec68638e70cd36e73
Currently the driver uses structure for peer mac address
to store the mac address.
Use the already existing peer mac address array for the same.
Change-Id: Ib49b2ac4747fce3610da73a1d29c67ccaaeaad65
CRs-Fixed: 2390282
Flag WLAN_FEATURE_NAN_CONVERGENCE was added to protect the
converged NAN code inside NAN Component. Since the original
NAN Discovery related code has now been moved inside NAN
component, keeping this flag separate doesn't make sense.
Combine this flag with WLAN_FEATURE_NAN flag which is the
original NAN feature flag.
Change-Id: I0045dcccd36524cbcd4253347c9e0a5704193c2b
CRs-Fixed: 2377393
The TLV WMI added support for a new WMI_SERVICE_WLM_STATS_REQUEST
service along with an associated WMI_WLM_STATS_EVENTID event, so add
support for a proxy unified WMI service and event.
Change-Id: Ic79c4b757fe2d4e806306750250e3c102745c486
CRs-Fixed: 2388911
Add WMI_HOST_REGDMN_MODE_11AC_VHT20_2G in WMI_HOST_REGDMN_MODE
bitmap.
WMI_SERVICE_READY_EVENT indicates ht/vht capability by
hal_reg_capabilities-> wireless_modes, REGDMN_MODE_11AC_VHT20_2G
indicates 2g vht20, check and save it as
WMI_HOST_REGDMN_MODE_11AC_VHT20_2G.
Change-Id: Idfb9a0f576619d4f890c2c0df68fc903f311c510
CRs-Fixed: 2384269
The sme_session_id field in struct add_ts_param is poorly named since
that is legacy MCL nomenclature, so there is a desire to rename it to
vdev_id to align with the converged nomenclature.
The first phase of renaming introduced a union so that both the old
and new name could be used by legacy projects, but only the new name
was used within the qcacmn project.
Now since all legacy projects have been updated to use the new name,
for the second phase remove the union, leaving behind just the new
name.
Change-Id: Ie86a3c0833899fbeacd458a53d9e23c6a67e7f12
CRs-Fixed: 2384157
The sme_session_id field in struct add_ts_param is poorly named since
that is legacy MCL nomenclature, so there is a desire to rename it to
vdev_id to align with the converged nomenclature. As the first phase
of renaming introduce a union so that both the old and new name can be
used by legacy projects, but otherwise only use the new name within
the qcacmn project.
Change-Id: I93743c3b1e3180589a3af83ed9e51d8dc95324d9
CRs-Fixed: 2384156
Do not call regdb core functions from other components directly.
Instead, call regdb dispatcher functions.
Also, wlan_objmgr_vdev_obj.h file is removed from reg_services.h file in
Ie43acc03a5c35200f3e43bc978b792d5047eeb77 and reg_services.h is removed
from wlan_reg_services_api.h in I891b14fac7a4eddf2697d2ecdc0ac4a82046f532.
Therefore to fix "'struct wlan_channel' declared inside parameter list"
error in wlan_dfs_utils_api.h file, I have included wlan_objmgr_vdev_obj.h
file before wlan_dfs_utils_api.h in scan, dfs and wmi component.
Change-Id: Id8816f5137c3b1f9200c59fc3f9041980631f22f
CRs-Fixed: 2349173
The original implementation of the "get link status" feature contains
some design and implementation details that are not ideal, so fix the
following deficiencies:
- The link_status_params struct contains three fields that are unused.
- The only link_status_params field that is used, session_id, uses
legacy terminology instead of converged terminology
- The wmi_unified_link_status_req_cmd() implementation uses a void
pointer instead of the correct underlying type for the WMI handle.
Note that change I508ec083298caa45d4cbb1ba28b21e47e379a804
("qcacld-3.0: Align with revised "get link status" Unified WMI") is
interdependent with this change.
Change-Id: I057ca0aff4a627c7fcdb9f90a5da46473813f60a
CRs-Fixed: 2381364
Callback signature in wmi_process_fw_event_default_ctx
is different for WIN and MCL. Make it same.
Change-Id: I28ad8e6068742095bdb9bc265e46dead8bfb217d
CRs-Fixed: 2372980
Currently we have same function name/different implementation when set
wmi scan channel list for WIN and MCL, the implementation for WIN side
send_scan_chan_list_cmd_tlv looks more intuitive which will remain with
minor change.
Remove definition of struct scan_chan_list_params and wmi_channel_param
which is no longer needed. Change HT flag set independent on VHT flag.
Add WMI DFS flag set if channel_param.dfs_set set.
Change-Id: I131ca09c12687bda5eb3eb03b7bcca1d62ac7aa9
CRs-Fixed: 2363675
Change Ie6c4a9847f2daa9ba2aebd17f386d584201b86d6 ("qcacld-3.0: Remove
obsolete set/reset ssid hotlist") in the qcacld-3.0 project removed
the only client of the WMI SSID hotlist infrastructure. Since this
infrastructure is obsolete, remove it.
Change-Id: I4a1de39c982947bbf4958d976426f95e3217f1a3
CRs-Fixed: 2381277
In wlan_cfg80211_scan the number of ssid, ssid length and number of
channels are not checked for max size of array and thus can lead to
Out of bound access of memories.
Fix is to add bound check before copying the params.
Change-Id: Ie6d4e546fb9c884d5988493b611ef7b217f0a95c
CRs-Fixed: 2375217
Per the Linux coding style both mixed-case names and so-called
Hungarian notation are frowned upon, therefore replace the identifier
pAddPeriodicTxPtrnParams everywhere it occurs.
Change-Id: Id80fc4cd22a8e4af125f01b937e03eea0b898283
CRs-Fixed: 2371906
Using both structure wmi_tdls_params and tdls_info if TDLS component
sets FW states, which will cause memory corruption potentially. Use
enum wmi_tdls_state as type of tdls state.
Change-Id: Ia1e78a5c6d8aee9ab5166c0704dd7827f42c2457
CRs-Fixed: 2372452
wmi_unified_bcn_buf_ll_cmd in wmi_unified.h had compilation flag
CONFIG_MCL. To get rid of the compilation flag, a separate header
file is created
Change-Id: I0bbcdf749f461f6880aacc1e3ef4e8e8fdc08ff6
CRs-Fixed: 2366773
Two new WCNSS_qcom.ini values "roam_score_delta" and
"roam_trigger_bitmap" are introduced. These values are sent to
firmware over the WMI command WMI_ROAM_AP_PROFILE over the
structure wmi_roam_cnd_scoring_param. The values to this
structure are populated from struct scoring_params.
Add roam_score_delta and roam_trigger_bitmap in scoring_param.
Populate these values from roam request to the structure
wmi_roam_cnd_scoring_param to be sent over the wmi command.
Change-Id: I012867e60ddf18a276250ef3bd27015f191d8a6a
CRs-Fixed: 2368263
