Add control frame stats accounting support.
Accumulate both per peer BAR and NDPA counts in Tx and Rx per PPDU stats
path. Accumulate per peer RTS success and failure count only in per PPDU
Tx stats path.
Change-Id: I78fb3546cd831559e208a7330feb2eb67b9a28de
CRs-Fixed: 3313435
Due to the CCE rule in QCN9224 IGMP packets will be routed
to err ring. When multipass is enabled, perform multipass processing
before handing over the packet to stack.
Change-Id: I50b747710eb3c49eab60c81bbc61e75e2f8650ed
CRs-Fixed: 3275888
In 256M profile dp_li_rx.c file is not getting compiled.
Initialize dp_rx_chain_msdus_li() only when HOST mode is supported.
Change-Id: I96f71b9ea7869f0ba9fec05424b0a8c6f378f2f4
CRs-Fixed: 3314081
Changes dp_rx_buffers_no_map_replenish API to
miminize the contention on RX refill ring lock
Change-Id: Ie55f034c6d01abbab21707460cd0f20548b35ba2
CRs-Fixed: 3313886
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
Before we are updating RSSI params directly into mon_rx_status
this structure will reset every PPDU this breaks iwconfig,
wlanconfig and monitor packet RSSI values.
Fix added to storing the values in the mon_pdev.
Change-Id: I9f8fa776c65cbad84fac5e8c2f65b3fce1386e20
CRs-Fixed: 3276503
We allocate extra buffers than requested when watermark is less
than critical low threshold. While allocating extra buffers we
should check for boundary conditions so that total allocated
buffers is always within the range of available entries.
Change-Id: I2f24c6157cb2afcc8bc5ca84b7e0308588a4d99d
CRs-Fixed: 3307051
When compact rx tlv feature is enabled fetch the
reo qdesc from the peer instead of rx pkt tlvs.
Change-Id: Idc9eec559b71ebb2dc39ea1d648a384ea0eb9559
CRs-Fixed: 3311270
get the HP of the RXDMA ring without incrementing
This will ensure in case of nbuf failures the ring
HP remains unchanged
Change-Id: I69ec9207a44a4c50484933797326e962ad2d4a5c
CRs-Fixed: 3309394
In some of the erorr cases, allocated mpdu's are not
freed leading to a memory leak.
Changes are done to iterate over mpdu queue and
frees allocated mpdu.
Change-Id: I18d3a57b366b9fa7aa934ac062c7acd1a9065d1b
CRs-Fixed: 3295577
Adding compact tlv support for QCN9224, As part of this change
Rx tlv size will reduce from 384 bytes to 128 bytes.
Change-Id: I3f42a781e42b2e696a5b25d9c5f333c8cc83b7fe
CRs-Fixed: 3274152
With WIFI_MONITOR_SUPPORT=n and WLAN_TELEMETRY_STATS_SUPPORT=n,
declaration of struct cdp_peer_telemetry_stats within function
dp_monitor_peer_telemetry_stats is not visible.
Hence add WLAN_TELEMETRY_STATS_SUPPORT feature flag for function
dp_monitor_peer_telemetry_stats when WIFI_MONITOR_SUPPORT=n.
Change-Id: I2e4a789552296361c189552707d3e3c441a042e3
CRs-Fixed: 3310407
The function dp_monitor_reap_timer_suspend() is not
declared for WIFI_MONITOR_SUPPORT disabled case, which
will cause build failure.
To fix it, declare dp_monitor_reap_timer_suspend() in
'dp_internal.h' for WIFI_MONITOR_SUPPORT disabled case.
Change-Id: Id4d246975ccf9eec06a8c794fbbe71f8a934826b
CRs-Fixed: 3309771
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
Currently we cannot track vdev ref_cnt change with
peer creation and deletion. This change will help track
the vdev ref_cnt and detect if any pending unreference is
causing inactive vdevs.
Change-Id: I5548667b0f1541efb583f912f6b7ef8a88853f5b
CRs-Fixed: 3303571
Currently the mpdu level flags/values are obtained
from the MPDU_START tlv of each msdu, when processing
in the RX error path.
The MPDU_START tlv is valid in an msdu only if it is
the first msdu-in-mpdu and will not be valid for all
the subsequent msdus-in-mpdu.
Accessing and using the incorrect values from the
MPDU_START tlv leads to unwanted exception/behaviour.
To fix the above mentioned issue, cache the mpdu level
information from the tlv when processing the first
msdu-in-mpdu and use it for the processing of the
subsequent msdus from the same mpdu.
Change-Id: Ic0b47716d3d428bb0b536c4ee23c1392f183d1fe
CRs-Fixed: 3306327
For STA MLO connection, AP might send M1 right after assoc response
on assoc link, but at this monment, host has not sent wmi_peer_assoc
for the assoc link and no osif_rx is registered to dp_vdev, MLD peer
will not be initialized in FW side and no HTT MLO peer map msg to host,
then this M1 frame will be detected as no valid txrx_peer and dropped
in host as dp_vdev->osif_rx is NULL as well.
Store this M1 frame to cached buffer queue until CP register the osif_rx
to DP and then flush them back to stack.
Change-Id: Ie84fa9c39db75fe77b9fd61dc1bf46f2fa737df7
CRs-Fixed: 3289587
If all the type and subtypes are enabled then there is
no need to dissect frames and validate type and subtype.
Add flag to indicate such configuration.
Change-Id: Ia7f919e5bdb175019a39f23be9e1d5a9a12fec31
CRs-Fixed: 3303105
When the length of a 802.11 frame is more than the
size of the posted receive buffers, it is split across
multiple buffers, which have to be accumulated before
submitting to network stack.
For all-but-last buffer which are used for the above
mentioned large 802.11 frame, the MSDU_CONTINUATION
flag will be set indicating that remaining data of the
same msdu has been DMA'ed to the next buffer.
The current implementation in monitor-1.0 works for
legacy chipsets, where MSDU_START tlv is available and
hence the aforementioned information was available in
all the buffers containing the large 802.11 frame.
For kiwi target, there is no MSDU_START tlv, and hence
a lot of information eg: mpdu_len_err, decap_format and
l2_hdr_offset are not available in the buffers where the
msdu_continuation flag is set. This leads to an attempt
of mpdu_restitch using incorrect data from tlv, and hence
the mpdu_restitch fails for such large 802.11 frame.
Fix this issue for kiwi target, by gathering all these
information which are available in the last buffer and
are used to process/accumulate the entire 802.11 frame.
Change-Id: I1c4fc9fd574c1c5fabc845407aa6f2d990c60906
CRs-Fixed: 3261494
For kernel version 5.15 or later, include linux/stdarg.h in
i_qdf_types.h and for older versions include stdarg.h.
Also remove inclusion of stdarg.h from dp_internal.h,
qdf_trace.h and qdf_types.h files.
Change-Id: I2eaa1af06fda0ac07a1be3d245f197de0b85719d
CRs-Fixed: 3295172
In defrag path will be receiving raw frames with wifi header,
instead of fetching the addr4 from the tlv, use it from wifi header
Change-Id: I516295660f39135225efd79c6b1bb0b93b1d81d3
CRs-Fixed: 3303206
The rx tid setup function is called from multiple contexts.
Acquire lock before calling that function to avoid race condition.
Change-Id: I7a0443e5e09a068301de171afeb4d400bf54b1c8
CRs-Fixed: 3291079
Tid in RX frame header may be larger than MAX TID allowed
value, this will lead a out of boundary array access and
lead to kernel crash at last. Change is aimed to do a TID
check and discard such frame when necessary.
Change-Id: I11f312668a5a42d690c058550f22b0f36f952104
CRs-Fixed: 3264581
In case of MLO same adapter maps to both vdevs. Tx is done with
primary link vdev pool. In link switch case vdev0 flow pool is
deleted and traffic will continue to flow with same vdev0 flow_id
This is resulting in packets drops within the driver due non-availibilty
of flow pool.
Fix this by skipping flow pool deletion in case of STA MLO connection.
Change-Id: Ie56ea221f7f254484bd31ec4880f2155779fb513
CRs-Fixed: 3292979
Add cfg command to enable umac reset skeleton debug, which
when enabled will skip post reset procedure handling.
Change-Id: Ieca393e6292660bb3ada40408fd6e71ac78d0a1f
CRs-Fixed: 3296960
certain BE specific HAL APIs were only initialized for
KIWI chipset but not for WKK. Now moved all these APIs
under beryllium generic initialization.
These APIs are mainly used in de-frag pkt handling.
CRs-Fixed: 3294784
Change-Id: I6611f1b7ef80b432d24a490ba65880dd55539137
