Add control frame stats accounting support.
Accumulate both per peer BAR and NDPA counts in Tx and Rx per PPDU stats
path. Accumulate per peer RTS success and failure count only in per PPDU
Tx stats path.
Change-Id: I78fb3546cd831559e208a7330feb2eb67b9a28de
CRs-Fixed: 3313435
Due to the CCE rule in QCN9224 IGMP packets will be routed
to err ring. When multipass is enabled, perform multipass processing
before handing over the packet to stack.
Change-Id: I50b747710eb3c49eab60c81bbc61e75e2f8650ed
CRs-Fixed: 3275888
The RX REO functionality has numerous misspellings of "forwarded",
including multiple identifiers. Fix these to use the correct spelling.
Change-Id: Idc4e66e7356b978742fea30ae7ef0c9498c4f938
CRs-Fixed: 3313839
In outdoor deployment, if there are VLP rules present, set the default
power mode as VLP, else set it as SP.
In indoor deployment, if there are LP rules present, set the default
power mode as LP, else if VLP rules are present, set it as VLP, else set
it as LP.
In reg_propagate_mas_chan_list_to_pdev, make the call to
reg_save_reg_rules_to_pdev before reg_init_pdev_mas_chan_list as
reg_set_ap_pwr_type which is called in its path requires reg rules.
Change-Id: I773c54b18aceb8db9666d16b08e841216124aaff
CRs-Fixed: 3311810
Place extract_ext_fcc_rules_from_wmi function near its
caller and modify function definiton of empty function
reg_set_pdev_fcc_rules.
Change-Id: I6918addbe81bb410355616023e0c6dac534700b6
CRs-Fixed: 3286479
In 256M profile dp_li_rx.c file is not getting compiled.
Initialize dp_rx_chain_msdus_li() only when HOST mode is supported.
Change-Id: I96f71b9ea7869f0ba9fec05424b0a8c6f378f2f4
CRs-Fixed: 3314081
Low latency SAP can come up on below two profile
a. Gaming
b. Lossless Audio
Scenario: LL SAP is present on 5 GHz channel and scan comes up
DBS: For both profile, allow scan only in 2.4 GHz channel
SBS: For both profile, allow scan on non low latency SAP
channel which are mutually exclusive.
Change-Id: I9d5832a457d08325b9e66099286ae3f18cdc66e1
CRs-Fixed: 3294607
Add a new QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG to
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY sub command to set
the concurrency policy for AP interface.
QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG uses the values
defined in enum qca_wlan_concurrent_ap_policy_config to specify
concurrency policy.
Change-Id: I73931e41e469b3696f80fe8897428d4fc796ec95
CRs-Fixed: 3302865
Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY to
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY to allow extension
for other interface type(s). A subsequent commit will extend the
renamed definitions in a manner that is inconsistent with the
current naming.
This is a precursor for AP/P2P concurrency policy configuration
support via updated vendor command
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY.
Change-Id: I1df8e7b289a8d7f1982f5daab732a36ad013d9ca
CRs-Fixed: 3302835
In wlan_crypto_global_api.c there are several functions which use a
misspelled term for "nonce" so replace them with the correct spelling.
Change-Id: Iedc65bbad173c5fc398e25730853bc7b36e86b31
CRs-Fixed: 3313801
To protect user privacy, print SSID with QDF_SSID_FMT
and QDF_SSID_REF, then SSID will be hide in logs if
anonymization is enabled.
Change-Id: Ifad0ccd76bd1184a9b1d20f3d7fa4455df924843
CRs-Fixed: 3291826
Current code has wlan_coex_public_structs.h in qcacld, when it should
be in qcacmn due to convergence of the COEX feature.
Fix this by moving the header file to qcacmn.
Change-Id: Ibfc25ee0811d7c1b32eccd1637aa0268499619d3
CRs-Fixed: 3289254
1. Update "6 GHz max bw support" for KUWAIT country.
2. Do not map "FCC1_AP_SP_6G" to super ID 01(FCC1_6G_01) which is not
allowed.
Change-Id: I61cc359a34257aeb00b8e3449398e0b73bb49590
CRs-Fixed: 3303138
Add service class id attribute
QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_SERVICE_CLASS_ID in SCS rule
configuration vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_SCS_RULE_CONFIG.
Change-Id: I1a1be0a1a5c65be488e36c0d078dbc6aef47838a
CRs-Fixed: 3314058
Changes dp_rx_buffers_no_map_replenish API to
miminize the contention on RX refill ring lock
Change-Id: Ie55f034c6d01abbab21707460cd0f20548b35ba2
CRs-Fixed: 3313886
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
Add a new regulatory callback registration API and a
regulatory API to update tx power whenever the country code
changes without change in operating channel OR if fcc
constraint is set. This MCC-specific regulatory API is
called from HDD and invokes the TPC calculation logic via a
callback during the above-mentioned cases.
Change-Id: I7d3db83129d169b7e0421c20c061de356f32cfa2
CRs-Fixed: 3311432
Before we are updating RSSI params directly into mon_rx_status
this structure will reset every PPDU this breaks iwconfig,
wlanconfig and monitor packet RSSI values.
Fix added to storing the values in the mon_pdev.
Change-Id: I9f8fa776c65cbad84fac5e8c2f65b3fce1386e20
CRs-Fixed: 3276503
Convert host channel width (enum phy_ch_width)
to WMI channel width before sending this value
to target.
Change-Id: If6ec2f7a9872cd28eafdce30397ec9aa1b0a1739
CRs-Fixed: 3311319
Add ACTION_OUI_11BE_OUI_ALLOW enum to support new WMI action
oui type WMI_VENDOR_OUI_ACTION_ALLOW_11BE.
Add scan entry to candidate validation struct.
Change-Id: I502a246584cd5ee6b4759d8fbb67629628314560
CRs-Fixed: 3301859
The default PSD and EIRP tx-powers are filled only for LPI power mode.
Since VLP support is added, add default PSD and EIRP tx-powers for VLP
power mode.
Change-Id: Ida8eebaf37a6bf6c663a24f832b4e89baf2d8659
CRs-Fixed: 3311795
Logic of checking concurrent vdev while sending
pd threshold command is removed from mlme as it
is handled while concurrenct vdev up and down. So,
we don't need to include policy mgr headerfiles in
vdev_mlme file as no policy manager function is invoked
from mlme.
Change-Id: Iec307437d929df5dceb58bf931fd20fa29b55550
CRs-Fixed: 3313112
Send BSS color and partial BSSID bitmap to fw when SR
enable is sent to FW, so that FW can classify the srg
and non-srg colors.
Change-Id: I44711fd7e7cc05867d042a04e783ae29b04b388a
CRs-Fixed: 3304796
Add support to set / get SRG min and max pd threshold
offset, SR disable / enable due to concurrency in vdev mlme.
This will be used to verify that PD threshold provided by user
is with in the AP range or not and it will be used to send the
data to userspace whenever queried.
Incase when single MAC concurrency is not supported with SR,
these VDEV mlme variables will also used to enable / disable
SR at dynamically.
Change-Id: I024b31950d9a5c0f5086972e91db440b23ed712f
CRs-Fixed: 3304789
Currently, SRG pd offset is not sent to fw as part
of WMI_PDEV_PARAM_SET_CMD_OBSS_PD_THRESHOLD. Add
support to send SRG pd offset provided by userspace,
if provided offset is with in the range of min and max
SRG PD offset advertised by AP.
Change-Id: I8b70dedbabcc6c3a296b8d378b9317924dd5c581
CRs-Fixed: 3304747
Handle SR enable vendor command as part of which
send PD threshold value provided by userspace
check the range of the provided threshold,
if threshold lies with in SRG or NON-SRG
range then provide the threshold sent by
userspace else send the MAX of SRG and NON-SRG
offset advertised by AP.
Change-Id: I428a933cc324446fdb4f18f535f1b78228d504fa
CRs-Fixed: 3304779
Move the QCN attributes enum to common code to keep a sync
between FW and Host values.
Change-Id: I0e4da33781c9e5230b6b309942cdc672c707d29f
CRs-Fixed: 3307120
We allocate extra buffers than requested when watermark is less
than critical low threshold. While allocating extra buffers we
should check for boundary conditions so that total allocated
buffers is always within the range of available entries.
Change-Id: I2f24c6157cb2afcc8bc5ca84b7e0308588a4d99d
CRs-Fixed: 3307051
When compact rx tlv feature is enabled fetch the
reo qdesc from the peer instead of rx pkt tlvs.
Change-Id: Idc9eec559b71ebb2dc39ea1d648a384ea0eb9559
CRs-Fixed: 3311270
CNSS prealloc maintains various prealloc pools of 8Kb, 16Kb, 32Kb
and so on, and allocates buffer from the pool for wlan driver. When
wlan driver requests to free the memory buffer then CNSS prealloc
derives slab_cache from virtual memory via page struct to identify
prealloc pool id to put memory buffer back into the pool.
In kernel 5.17, slab_cache is removed from the page struct. Modify
QDF functions to add headroom at the beginning of allocated buffer
to store cache pointer. CNSS prealloc will store cache pointer in
this headroom during allocation and later use it in identifying
prealloc pool id to put back the buffer.
Change-Id: I2c19b72b82092d553d474a50385ed3095a0fab39
CRs-Fixed: 3312550
get the HP of the RXDMA ring without incrementing
This will ensure in case of nbuf failures the ring
HP remains unchanged
Change-Id: I69ec9207a44a4c50484933797326e962ad2d4a5c
CRs-Fixed: 3309394
