Add PM_SCC_ON_5_CH_5G pcl type to give priority
to SCC 5G followed by rest 5G channels for next
connection.
Change-Id: Ibff48dcd145368d967fb9f39c0118f94897a72a4
CRs-Fixed: 3170031
Optimize the 3 home freq logic in policy manager and rename few
APIs indicating the action they are performing.
Change-Id: Ice92917573537d0717144690a84ea46602984ef2
CRs-Fixed: 3174550
Acquire the policy mgr connection entry lock before
update no_of_active_sessions and call policy_mgr_decr_connection_count
API. Other thread may validate the no_of_active_sessions and
the connection list, so the two operations have to be done
in lock acquired.
Change-Id: Ibf06c7afe869ce4d582f54deae3f15dd789bdf1b
CRs-Fixed: 3175837
It is improper to return false in
policy_mgr_get_roam_enabled_sta_session_id,
which return value recognized as vdev id.
Use WLAN_UMAC_VDEV_ID_MAX instead.
Change-Id: If99f903c9344a99832d8d010deb5b2c35f2622f1
CRs-Fixed: 3172279
Previously elna_bypass is of type bool, which check for
elna_bypass enabled or disabled with en_dis
Change en_dis to elna_mode of enum extlna_mode
to support extra mode of firmware_default
Change-Id: I12dfe3a07e04b102562b11c8235d56bd3e2a7059
CRs-Fixed: 3169266
Replace slave for target, and replace
master for initiator which pair of slave.
Change-Id: I4f758a2149f9314d92cc775d2d665ada0d8c8a43
CRs-Fixed: 3169100
Add 3 home channel check for 4th active vdev. Do not allow
if in DBS and SBS modes 4th freq can lead to 3 home channel.
And optimize 3rd active vdev APIs.
Change-Id: I2d1ef437fc5c69b1255863c85a2b9f4efa24fa58
CRs-Fixed: 3172212
During sta+sta dbs concurrency, if vdev1 sta disconnect, vdev0 sta pcl
isn't updated to firmware to include all band.
Change-Id: I986b85644cf17ad917136adc1ea274ae2d8ed795
CRs-Fixed: 3171216
Add a new field max_mcs_index in mlme_legacy_priv to save max mcs
index of current vdev.
Add a new field max_real_mcs_idx in hdd_station_info to save max
mcs index of the connected station.
Change-Id: I28908515cbe5c18c79f14f8645defd5c82e3a6f0
CRs-Fixed: 3065838
Currently driver code has data type as char* for NAN related code.
With this change update this data type as const char*.
Also, move NAN related functions under WLAN_FEATURE_NAN feature flag.
Change-ID: I61ad10304be4399a68f32778d01d9a951d7d14bb
CRs-Fixed: 3169168
Currently host driver creates/deletes NDI interfaces using
vendor command. With the kernel 5.12 version onwards,
interface creation/deletion is not allowed using vendor
commands as it leads to deadlock when driver tries to acquire
the RTNL_LOCK at the time of netdev register/unregister.
With this change, add support to Create and delete NDI interface
using NL80211_CMD_NEW_INTERFACE and NL80211_CMD_DEL_INTERFACE
commands respectively if driver advertises
QCA_WLAN_VENDOR_FEATURE_USE_ADD_DEL_VIRTUAL_INTF_FOR_NDI capability.
Since NL80211_CMD_NEW_INTERFACE and NL80211_CMD_DEL_INTERFACE
already comes with the rtnl lock and driver does not need to
take the rtnl lock again which will help to avoid the above issue.
Change-Id: I6d5441a5e883de1222f105f26d73cb0506d16ddf
CRs-Fixed: 3167125
Currently min_dwell_time_6g ini support is there only for normal
scan.
Added support to configure min_dwell_time_6g in roam offload scan.
Change-Id: I7da5fff738dbaf2a28a909e58ab6c797724ccfaf
CRs-Fixed: 3156597
Currently wmi_roam_event_id event handler only register under feature
WLAN_FEATURE_ROAM_OFFLOAD, but it's needed for LFR2 roaming too. So
refine roam event processing for LFR2/LFR3.
Change-Id: Ic07fd8a543142fc1e151f484979ab99ff55ce802
CRs-Fixed: 3161973
Update PCL type for STA+SAP+P2P 3vif concurrency using
PM_SBS_CH_24G, PM_SCC_ON_5_5G_SCC_ON_24G.
Change-Id: If82f928134e45486114fd6d4a6222e7127d6b9fd
CRs-Fixed: 3168636
Add handling for below pcl types which are added
due to ML STA and 2 P2P connection concurrencies.
PM_SCC_ON_5_5G_24G
PM_SCC_ON_5_5G_SCC_ON_24G
PM_SBS_CH_2G
Change-Id: I62df80c15bcd84ba9cb64cbf6ce2e4d154f6f697
CRs-Fixed: 3167325
Enable 3 SAP SCC on same mac to avoid restart third SAP failed after
5/6G disabled.
Change-Id: Ib95a38daeff97a8cb1e2571b0b271ca052f0ce62
CRs-Fixed: 3144224
Currently, for pcl where 2G channels are added pcl index is
updated to total no. of 2G channels only and first 11 entries
are considered in dump from final pcl list.
Fix is to add total no of 2G channels in pcl index instead of
overwriting pcl index with no. of 2G channels.
Change-Id: Ibcd2509ecb052bfde62a47a6dee38dd17c3d1c8f
CRs-Fixed: 3166961
Optimize logging by decreasing number of log
lines printed for the Tx frame path.
Change-Id: Iff24346a6b20286b68ee18451155495f624da316
CRs-Fixed: 3168409
If AP1 on 2G unsafe channel (no valid 2g channel so can't move),
STA+AP2 on 5G unsafe channel doing SCC, when STA disconnect, 5G AP2
is expected to restart to another 5G safe channel, but 2G AP1 will
also be selected to restart to another 2g safe channel (not in acs
range), which is not supported to switch to different channel at same
time.
To fix this issue, save last disconnected sta channel frequency in
policy manager context, and find the AP which is doing SCC with this
sta, and restart this SAP to safe channel.
To avoid possible OOB write warning, enlarge the input array buffer
of policy_mgr_get_mode_specific_conn_info().
Change-Id: If6ddd889cc0fd8b00796d42e6aa4d1a98b6b1070
CRs-Fixed: 3145226
In special case, tasklet(ksoftirqd/0) that handle WMI event was stuck
for 4 sec, SSR was triggered for timeout waiting for resume
event from FW during RTPM resume.
During SSR, cp_stats_tx_ops->inc_wake_lock_stats callback was cleared,
later WOW_WAKEUP_HOST_EVENTID was received, callback was executed, assert
happened.
Change-Id: Ib9ae7d61d1b415e9857657725ffd2ae1efd4795c
CRs-Fixed: 3165730
Connectivity management frame logs are sent for SAP mode also but
should be sent for STA mode only.
Send connectivity/roaming logs only for station mode.
Change-Id: Ib9ae7824f7eca61fdce4c2c163a24554e7b2eb36
CRs-Fixed: 3165658
As per the requirement, if TWT setup request is issued when
power save is disabled, expectation from driver is to return -EAGAIN.
Change-Id: I7a519d15787f912338afabf7e83b561cb3a2ebc0
CRs-Fixed: 3163880
Current NAN is allowed on passive channels which is not
expected as passive channels does not allow initial
trnsmission.
To address above issue, do not allow NAN on passive
channels.
Change-Id: Ied7ba8eb38feb528209cafa6793aed93456989d6
CRs-Fixed: 3157369
Enable pci gen switch feature by default since the ini will not take
effect unless the feature flag is enabled in FW too.
Change-Id: I4170ddc84e994829e1f8144d3a90deddfe71f280
CRs-Fixed: 3162231
Since HB failed logic change to send deauth, we don't
need probe logic after HB failed. Clean up timer and
unnecessary code.
Change-Id: I26d9235c157065a21469b01abf31751825a1f277
CRs-Fixed: 3158364
Add and Register target if API to process MCC
quota wmi event. Deliver the event to existing
interfaces.
Change-Id: Ib044a336af2f5093dffbb053e65a52a174b85154
CRs-Fixed: 3101870
Generate a Level 2 update frame and send it to the bridge in SAP
mode when a new station connects.
It will update the forwarding table of all the bridge devices
through source port learning.
Change-Id: Ia804968453c051e4c8322d3735506a912c0d963d
CRs-Fixed: 2997409
Enable source port learning for SAP to add AST entry for the
remote stations with next hop. The SAP should use 4-address
frame format for the remote destinations.
Add support to handle data packets for WDS destination.
Change-Id: I6002e6dd9c9bb2c7b2e4f85bf06156dbb7feebee
CRs-Fixed: 2997812
This reverts commit I06ea617df49287ee87e7b5bf8b20971b581dedf1
which introduced a fix to enable/disable arp offload on every
suspend/resume even if gActiveModeOffload is enabled, which is
not correct. The expectation here is that if gActiveModeOffload
is enabled, host should enable arp offload only onece and it
should not disable on any condition.
Change-Id: Ifc4ff1c0a39cc4c17e9a292ef8b0ebabd766a710
CRs-Fixed: 3147896
Filter out the BSS Transition Management Request frame
and allow it to be sent out from driver to firmware.
Change-Id: I6672c55421b0aa5cf186c82bec977848fdaddc2b
CRs-Fixed: 3154042
Reduce the log level for the frequent acceptable errors
to reduce the roam latencies.
Change-Id: I9f5405025948d160e6fcd65ecca05dce7670ea84
CRs-Fixed: 3150439
Currently mac address is getting configured as the wow pattern
while the vdev is getting created, configure the mld address also
during the vdev creation so during legacy connection or roaming
between the ml-legacy vice versa there wont be packet drops because
of pattern mismatch.
Change-Id: I9b98649bca132a6665f2e4dd94d9c6b840223827
CRs-Fixed: 3124115
Move MLO STA-SAP concurreny handling to Policy Mgr which
is present in CSR currently.
Also, Move MLO STA-STA concurreny handling to Policy Mgr
which was part of If Mgr currently.
Change-Id: I2b8de17c3d31b43ff1f6b81a7de07b88888d7fb5
CRs-Fixed: 3153393
Peer MAC address is not specified when get_peer_by_mac fails.
We should print the peer MAC address with debug message.
Change-Id: I9d75098784879ddecd447f8dbbcd61e6cdc1bf76
CRs-Fixed: 3153776
In the api cm_roam_scan_info_event(), only for partial
roam scan the frequencies are logged in logcat. For full scan,
the expectation is to print the frequency count as the number
of characters for scanning all frequencies exceed 255.
Enable Roam full scan logging in api cm_roam_scan_info_event()
Change-Id: Ib644a4e8d85e434e8b826c7656cda1251134c4fa
CRs-Fixed: 3131791
Currently the beacon miss disconnection is sent when host
wlan driver triggers disconnect and roam result is printed
after the roam stats event is received. Since roam
stats event is received after host triggers disconnect,
the order of prints is BMISS_DISCONN -> ROAM SCAN ->
ROAM_SCAN_DONE-> ROAM_RESULT.
But the expected order is ROAM_SCAN->ROAM_SCAN_DONE->ROAM_RESULT
->BMISS_DISCONN.
So send beacon miss disconnection event after roam result.
Change-Id: Ib1695962bc1613fa4101cebf28b188db42fb5ab5
CRs-Fixed: 3152370
During vdev creating, RTPM suspend/resume may happen, after vdev
created in host, if ITO config wmi cmd is sent to firmware
before vdev create wmi cmd, firmware will assert for invalid
vdev.
To fix it, only config ITO when vdev is up.
Change-Id: I3d744d7fffd9afc7780d3a19c92613a94556cfa0
CRs-Fixed: 3152034
Send kernel timestamp to userspace via a
new vendor attribute
QCA_WLAN_VENDOR_ATTR_DIAG_KERNEL_TIMESTAMP.
Change-Id: I085a1f140b5036895249723f6a5b34b18d9aa574
CRs-Fixed: 3146742
