Add 11ax related IEs in dot11f.frms file.
Add new IEs to support 11ax/High Efficiency(HE). HE capabilities and
HE Operation are the two new IEs added and the IE definition is based on
the 11ax D1.0 specification.
Change-Id: Iab4219a7c068faca0337f70f921ec178f7170952
CRs-Fixed: 1073481
Add WLAN_POLICY_MGR_ENABLE in build file to conditionally enable
Policy Manager code in host common
Change-Id: I879b6a223bed5d77d20a878667308aeb1071e609
CRs-Fixed: 2009818
wlansap_roam_callback function logging an error message if
roam_status is not handled, in default case of switch, but same
information is logged before switch. So remove this log.
Change-Id: Id53eb392929d9328f959c7e54d7f0a5dd77b0739
CRs-Fixed: 2007415
Set Band Capability ini config to PSOC user config. This can later
be used in UMAC component.
Change-Id: I9044cec35cdb478881b827101ee79bcf87084d73
CRs-Fixed: 2003488
When HDD detects that the session id and vdev id have de-synchronized,
print the PSOC reference tree and induce a crash.
Change-Id: I1ca47837cd024fd66e19d86222cfbbd85e3f5704
CRs-Fixed: 2020092
Sometimes MTRACE dump functions returns "unknown" values instead of
data passed to MTRACE. To resolve this add any missing MTRACE code and
data enums to the corresponding trace functions.
Change-Id: I86b9b9f433be64879c96ccc65c142e07aaf23ed0
CRs-Fixed: 2018532
qcacld-2.0 to qcacld-3.0 propagation
Current implementation does not update MDIE while processing of
PNO match event due to this STA is unable to connect to 11r AP.
Add changes to update MDIE to 'tSirBssDescription' in
csr_scan_save_preferred_network_found()
Change-Id: Ia419c0f7284fc168434d91bcc3d7b29b99a06f3f
CRs-Fixed: 2005101
qcacld-2.0 to qcacld-3.0 propagation
'apDataAvailPollPeriodInMs' ini is redundant in registry table and
hdd_update_config_dat().
Fix to remove redundant ini 'apDataAvailPollPeriodInMs' variable.
Change-Id: Ieb5214ec3052bbec793e91d294b03e425292e348
CRs-Fixed: 2000336
When SAP initiates deauth/diassoc for peer device, it sets
isDeauthInProgress flag. So, if host receives tx packets
for peer from network layer or ipa path while peer remove
is in progress, then drop the tx packets at hdd level
in __hdd_softap_hard_start_xmit based on above flag check.
CRs-Fixed: 2016092
Change-Id: I52c3bcd92478eb657bdd90d15eb13d1cd95ee090
wma_remove_peer does clear peer as part of disconnect.
hdd_roam_deregister_sta also does clear peer which results
in clear peer failed error message.
Fix is to avoid clear peer again in disconnect handler.
Change-Id: I0399a81779aad87201cb67e070421ec549b2d837
CRs-Fixed: 2019168
After PDR driver send regulatory hint with the same country code
which was already set by driver before PDR. As part of regulatory
hint kernel remove the custom regulatory flag from wiphy flags
and as in this case country has not changed, no reg notifier is
called and thus wiphy flags are not restored by driver.
Due to this if user set an country the channel flags and power
are not reset and 5Ghz channels remain Passive.
To fix this don't send reg hint during start modules if
init_by_driver flag is set.
Change-Id: I126465aa91f40df5c92da44361f414a7792e927f
CRs-Fixed: 2019049
It need qdf device if send mgmt frame. But host common can not access
legacy codes. Save it to soc object.
Change-Id: Ib943c5f3356e02b946ad1d30838d464e36dd643f
CRs-Fixed: 2014648
Currently in csr_purge_old_scan_results() mutex_lock
did't acquire by current thread but same thread is
releasing the lock due to which there is a ASSERT while
releasing mutex_lock.
Fix is to acuire the mutex_lock properly before releasing.
Change-Id: I1023dca73ffaa3d3b3a123d474c3ac5b0e1c1af2
CRs-Fixed: 2020452
Every access to remain_on_chan_ctx need to be protected
with mutex lock.
This change refactors the code in the function wlan_hdd_
cancel_existing_remain_on_channel() and wlan_hdd_cancel_
pending_roc().
Change-Id: Ie4551ab7cc4297f04ea2980aff7e613f6d3d2bb6
CRs-Fixed: 2020554
Some of cfg80211 callbacks need os structure wireless_dev. Pass it to
vdev object when creating.
Change-Id: I360f5a6d205dfa223139b7ca0de8e567146770f7
CRs-Fixed: 2014563
qcacld-2.0 to qcacld-3.0 propagation
If there are many beacon/probe received and posted to pe queue
the connection req frames may get delayed and thus effect the
connection. This may also lead to connection failures.
To avoid this prioritize the connection req frames in pe queue.
Change-Id: I5a6fd5c21242205dd080b2ba0cff5f823f51d109
CRs-Fixed: 2013381
Memory is not freed in lim_del_sta API when response
required is not enabled and wmi service
(WMI_SERVICE_SYNC_DELETE_CMDS) is enabled.
Fix is to free memory in wma peer delete handler.
Change-Id: I8d8a799935ad6199357b4a534e58d54dcbea8d2c
CRs-Fixed: 2015973
A previous commit failed to propagate WoW enable parameters down to
the Power Management Offload (PMO) component. Propagate WoW enable
parameters to the PMO component to restore unit-test suspend
functionality.
Change-Id: I6531a262a189b416499953bc013efdf64111ac5a
CRs-Fixed: 2020034
Add support to pass delay_start_time to firmware, this delay will be
used before starting the first scan cycle.
Change-Id: Ia3043eecc38507b1581fa85b8787b2e7786017de
CRs-Fixed: 2014142
Currently default waiting timer value is 100 sec which is too large,
change the timer value to 15 sec.
Change-Id: If116f9ace2e2c0c41438c4be9c9fa834ae9e4a60
CRs-Fixed: 2019739
11n or 11ac AP does not include 11g rates due to which
driver treats the AP as 11b AP.
Fix is to add HT/VHT check so that driver treats AP
based on capabilities.
Change-Id: I1bb49408e4e480578e2f190c5f7c0408f734d82e
CRs-Fixed: 2015843
