Add regulatory API to support updating extended avoid
frequency list from HDD to regulatory component. Then
populate the new final current channel list and secondary
channel list.
Change-Id: Icda683c30bd7f8e51a5fd930712658ce35eff418
CRs-Fixed: 2975136
This change will receive SCS procedure based parameters from
the control path and the peer will start building it's database
for traffic classification using SCS procedures.
Change-Id: I4fd7db595e0645285a95d0561eb46343238fa337
CRs-Fixed: 2970408
While adding amsdu padding in last buffer (in case of msdu split
across multiple buffers) or single msdu buffer, address of frag at
0th index and size of the current frag index are considered currently.
Instead the address and size at current frag index are to be taken
into consideration. Make change to use correct frag index for amsdu
padding.
Change-Id: I3c5ac11cbdb67bc5264bc62425825583158269a0
CRs-Fixed: 2907489
Refactor the current SAMP message for memory efficiency
and scalability. Introduce per-span and per-detector
information structures, in place of separate static
arrays for each 80MHz segment in SAMP message structure.
Also, remove members in the SAMP message that are no
longer in use.
The new structures will be under OPTIMIZED_SAMP_MESSAGE
flag, which is unset by default for all profiles, till
development is complete.
CRs-Fixed: 2912498
Change-Id: Ie176f762cee811efa5c257faebc57af7f3166f85
The existing assertions for unmapped variable in
rx descriptor results in an undesired bug_on since
the unmapped value is 0 for active descriptors.
The fix is to modify this assertion so that bug_on will
be triggered only if the unmapped value is 1 in rx
desc.
Change-Id: I03b27e0e42ce3c42b9fa148da9258063b0209b08
CRs-Fixed: 2985248
Add API to get partner links information to proceed for ML connection
in best links selected in ML scoring.
Change-Id: Ief13bc19d8e44af601e2fe6397112d841bfcce28
CRs-Fixed: 2961883
Add support to log ICMP seq no and ID in DPTRACE.
Other protcols can use this private proto data to record
there private data accordingly. Currently it is set to 0.
Increase the record entry from 40 bytes to 50 bytes.
Change-Id: Ief5fb26a97408a364af486f3eaec2e108de71d52
CRs-Fixed: 2951916
Wake-IRQ can be received just before Kernel issuing
suspend_noirq callback, such wake-IRQ would not be
handled by Kernel. So check if any tasklet most likely
CE2 is pending and abort suspend_noirq if true.
Change-Id: Ie3d6de97179aa0d8f383a086f4f8df27d3fc5254
CRs-Fixed: 2981882
When back pressure event comes from FW print NAPI stats in worker
theread to avoid cascading the issue by causing more latency in
processing the CE rings, due to the prints.
Change-Id: Ic846e06ae4b47f8ad46b269c8a175db7ed46b9bf
Export the API wlan_reg_set_ap_pwr_and_update_chan_list so that it can
be used by APIs outside the UMAC module.
Change-Id: I5205f22bb9d6c4e28688c2db03478d46e6a3d200
CRs-Fixed: 2984261
TLV targets support updating tx chainmask(soft-set) using
PDEV_PARAM_TX_CHAINMASK param. Update host enum accordingly to
use this for setting soft chainmask.
Change-Id: Ic5362fb8c79f07cbd83328b786b5930f75d2a084
CRs-Fixed: 2976914
Add CDP reason code support for sending DELBA request,
so protocol layer can make decisions for special cases.
Change-Id: I4e4b2e7f7232a8ab12d4c7838f97908f481dc787
CRs-Fixed: 2983553
Handle DCS-AWGN event and take actions accordingly:
For STA mode, if the interference locates on primary 20MHz,
disconnect from AP; otherwise, find a max interference free width
and trigger channel change.
For SAP mode, if the interference locates on primary 20MHz,
try to select a random interference free channel and trigger channel
change (stop SAP if no channel is selected); otherwise, find a max
interference free width and trigger channel change.
Change-Id: I33e79f454b459b12ad84f8b0f3259403037464ee
CRs-Fixed: 2958675
Export the ucfg API ucfg_reg_get_cur_6g_ap_pwr_type, so that it can be
used by the APIs outside the UMAC module.
Change-Id: I46a23f2d3a2545dcc07373f664b419c125f557e1
CRs-Fixed: 2981562
During deinit process we free the IRQs and call kill tasklet.
There is the possibility that Tasklet might be running when we
call kill tasklet and as part of tasklet exit it will try to
enable the corresponding CE IRQ which has already been freed.
Adding check for IRQ free condition to avoid any IRQ enable
calls after IRQ free is done.
Change-Id: I9d58ffbb3738251e3d8114631e2daacd07e33d7d
CRs-Fixed: 2973309
cfg80211tool athX scanband <val> config is used to
select a specific band to scan (i.e., 2.4GHz and/or
5GHz). The initial support for this command was
added as an iwpriv for WEXT-based scanning through
IOCTL. However, on bringing up cfg80211 support,
support for not extended for the cfg80211-based
vendor scan.
Add support to ensure that this command will
control band configuration for scanning for cfg80211
vendor scanning.
CRs-Fixed: 2969914
Change-Id: Ie3b7140ea78f15533e73fbe6251e670e6faa6d29
(1)naming change in HW CC related function
(2)refinement for cookie ID generation regardless of
SPT page address 4k aligned or not
(3)move CMEM size check under cookie conversion macro
Change-Id: Ib32d802f5512e5facfa4130826406943fb3d27f1
CRs-Fixed: 2977304
When host receives BAR frames with OOR/2K jump in sequence
number it updates REO HW with new starting sequence number
and requests F.W to setup peer reorder queue. But REORDER_QUEUE_SETUP
is already requested to F.W as part of initial add BA in host.
So while handling OOR/2K jump BAR frames don't send
REORDER_QUEUE_SETUP to F.W
Change-Id: Idc3657e901dc792f699b53c45e4ae5133d286891
CRs-Fixed: 2981280
Currently reg_get_5g_bonded_channel_state_for_freq,
reg_get_bonded_chan_entry and reg_get_bw_value apis don't
have support for 320MHz BW.
With this change add support for 320 MHz in above APIs.
Change-Id: I9a5563464a8969d19315a10013fd21f805dae184
CRs-Fixed: 2975464
HAL generic APIs which use HW definitons that
do not have same value across all lithium chipset
are moved to header files. So that these will be
compiled with appropriate header files
Change-Id: I6c167afa4212c5e884f5e18ff1ccb3bbbba8f5f5
Error log peer not found is coming spurious in
dp_2k_jump_handle on continuous error pkts, so
rate limit the same.
Change-Id: If4b577a7759136ea824ca62b63ef91d102b8decb
CRs-Fixed: 2978939
CE irqs affinity is set to gold cores, but affinity
hint is not removed while freeing irqs.
So remove CE irq affinity before freeing them.
Change-Id: If3822422f823cb3caa6e291387a2beadc62049b7
CRs-Fixed: 2975529
Move inclusion of wlan_mlo_mgr_public_structs.h under feature flag to
avoid compilation error in branch where new MLO files are stripped.
Change-Id: Iaf9fd4cde63e057afeec11948385c123a38eb65f
CRs-Fixed: 2981045
For WCN7850, all the REO errors are supposed to be handled
by the APPS core. In accordance with this design, re-route
all the REO error frames to the APPS facing rx-error ring.
Change-Id: Id6f956a1459d318a5876696842ca87fa29e1e27b
CRs-Fixed: 2965087
For certain wlan chips, eg WCN7850, all the REO error
codes are routed to the APPS core and none are handled
by the firmware.
Add support to handle all the REO errors. Currently for
all the newly handled REO errors, the packet is dropped
and the corresponding link descriptor is returned to the WBM.
Change-Id: I94f3afcbfc129befcb94db2dea855151bf8114f1
CRs-Fixed: 2965087
Currently the detection of whether a frame arriving on the
rx-error ring is done via the flags in the ring descriptor.
For targets which support providing previous PN in the
rx-error ring descriptor, the flags indicating BAR frame
will not be present in the ring descriptor.
Add BAR frame check and handling in the OOR and 2K-jump
frame processing handlers.
Change-Id: Iaba763559a84f1c1f6a193e01945124f08c506f2
CRs-Fixed: 2965086
Register, for WCN7850, the hal ops to get the
current PN for a packet from the tlvs.
Change-Id: I9fabc84aee318de2031bfa5f88dafe19b723079a
CRs-Fixed: 2965086
Currently the EAPOL/ARP/DHCP frames arriving as 2K-jump
or out-of-order frmaes are being delivered to the network
stack, without checking for the packet-number sequence.
WCN7850 has hardware support to provide the packet number
of the previous successful re-ordered packet from hardware.
Use this feature to check if the packet-number are in proper
sequence for these EAPOL/ARP/DHCP packets arriving as 2k-jump
or out-of-order packets before submitting it to the network
stack.
Change-Id: I1078452afce4bc00b2509436295e5bd80000feb4
CRs-Fixed: 2965086
