The interface idle timeout work is started at the very end of the SoC
probe process. During rmmod, this timer is proactively canceled, but a
race between probe and rmmod means this cancel is not deterministic. The
mirror operation to probe is remove, so cancel this work at the
beginning of the remove process. This preserves symmetry between probe
and remove, and also deterministically cancels the work, since probe and
remove are properly synchronized.
Change-Id: Idfd68c0ed638dbe810db72d64f301018db45d522
CRs-Fixed: 2309533
Optimize struct reg_table_entry definition by means of
alignment and data type declarations to save memory.
Change-Id: Ib97541b0868416d1d797d8326e265e9789a040da
CRs-Fixed: 2301744
Currently if target is not ready, vdev stop req use check
cds_is_target_ready() in wma_fill_vdev_req(), while peer related API
uses wmi_handle->wmi_stopinprogress.
As wmi_handle->wmi_stopinprogress is set after target ready flag, the
vdev stop req is dropped while peer delete is sent to firmware. This
leads to bss peer delete sent without vdev stop.
Remove cds_is_target_ready() in wma_fill_hold_req() and
wma_fill_vdev_req() so that only wmi_handle->wmi_stopinprogress is used
to detect firmware down.
Change-Id: I5a7fb886f8bbf9a10d25c6991a291bc4bd2bef48
CRs-Fixed: 2309680
Add debugfs entry to get last five roam scan stats info which includes
old bssid, new bssid, roaming candidates etc., for STA interface.
Change-Id: Ied66beb270d97b6e17a6116c1be0e82783094519
CRs-Fixed: 2203885
Add the following SAP/STA protection ini and cfg parameters to MLME cfg:
CFG_PROTECTION_ENABLED - CFG
CFG_FORCE_POLICY_PROTECTION - CFG
CFG_IGNORE_PEER_HT_MODE_NAME - INI
Change-Id: I3763d62c6aa4ae79a5a31dfac248e8367b6369ad
CRs-Fixed: 2310378
The driver always allow roaming command ROAM_SCAN_OFFLOAD_UPDATE_CFG
even through session roaming not "started" in CSR.
But WMA will always enable Roam_scan_mode to non-zero
to FW when handle the command ROAM_SCAN_OFFLOAD_UPDATE_CFG.
The inconsistency is the CSR still keep as roaming stopped
status but WMA enable the roaming on session.
In STA+STA case, there will cause two vdev roam mode enabled in Firmware
because the CSR roaming start state does not keep sync with FW.
Fix by enable FW roam only based on enable state from CSR
when handle the ROAM_SCAN_OFFLOAD_UPDATE_CFG in WMA.
Change-Id: I95a2bd1edd88cc241ae9821a6e0756c44663229a
CRs-Fixed: 2305594
hdd_reg_set_country() validates the hdd context, which returns an error
if start_modules_in_progress is true. This was the motivation behind
I4378438873ffa72c0fce415ade65b91b90e2c84a, which effectively moves the
call to hdd_reg_set_country() to after start modules is complete.
However, all of the callers to hdd_reg_set_country() already validate
the hdd context, so this check is redundant. This means
I4378438873ffa72c0fce415ade65b91b90e2c84a was unnecessary. As this
change also brought with it some technical debt in the form of
additional driver_status checks, simply remove the validate hdd context
check from hdd_reg_set_country(), and replace the original call site.
This change is also necessary to enable the removal of the
DRIVER_MODULES_OPENED state (I4ec1268eb491fec04a78b90e51c6e616d95e019e).
Change-Id: I5a0d8a8407969275f023431095ff6205ef515b62
CRs-Fixed: 2310446
Make the following updates to the extscan reset significant change
logic:
1) Exclusively use the Unified WMI data structures.
2) Update the HDD<=>SME interface to enforce the contract that SME
must not make any assumptions about the buffers provided by HDD.
Change-Id: I9b63924f4219f6d3567e3ee2b1a31e1a9ce3bc29
CRs-Fixed: 2309570
1) CONFIG_MPC_UT_FRAMEWORK should only be enabled for slub debug build
2) CONFIG_MPC_UT_FRAMEWORK should be protected under
gEnableUnitTestFramework INI setting.
CRs-Fixed: 2309562
Change-Id: I314ec928af2a350d518eb8f8dd62dbadee1746e8
In function hdd_register_rx_ol, hdd_ctx is retruned by cds_get_context.
Check for hdd_ctx being NULL before de-referencing it.
Change-Id: I5e45036930a03368310871d108062c2d24742602
CRs-Fixed: 2299782
Check if pointer returned by hdd_napi_get_all is NULL. This would prevent
de-referencing of NULL pointer.
Change-Id: I23af3319422e0d2ebd93ce410d76457c54551538
CRs-Fixed: 2299788
Unlock the rx_ring.rx_hash_lock spin-lock when returning due to
failure to do smmu map_unmap.
Change-Id: I1b905c0ad529c80f78807c030920121ee0909825
CRs-Fixed: 2299785
Add debugfs entry to get offload info (mc addr list, arp, ns etc.,)
for STA interface.
Change-Id: I8bf4491929b5ef04ed5ce19f4b0030945f0eb0c0
CRs-Fixed: 2203786
Add debugfs entry to get connect info (bssid, ssid, freq etc.,)
for STA interface.
Change-Id: Id5c350dbb4ca9b9f6b203459adee59b2d5e94f67
CRs-Fixed: 2203654
Add debugfs framework support to get connect, scan,
roam scan statistics and offload info from debugfs.
Change-Id: I86bdd7e449488d2bcda1b2eaaeb07aac7465770b
CRs-Fixed: 2203626
In low memory condition, RX ring may become empty when all
SKB buffers attached to the ring get consumed and kernel is
unable to allocate SKB buffer during replenish.
Create a pre-allocated pool of skbs during driver load time
and request the buffer from this pool in low memory case.
Change-Id: If8c6a4fe04f3c931dc60dcffe28e45166eab9835
CRs-Fixed: 2306861
P2P Listen offload is not a requirement for Genoa, hence featurize
P2P listen offload code to save memory foot-print for Genoa.
Change-Id: If50c784bb4cd6daac513a0654364e78cd636c9d3
CRs-Fixed: 2304554
Correct the typo in status check variable due to which
Nss setting returns failure.
Change-Id: I81a430b0482e79ee3b2d0b2c4e6aea232907919a
CRs-Fixed: 2302465
cds_is_module_state_transitioning() is effectively a partial
re-implementation of wlan_hdd_validate_context(). Instead of having
multiple copies of this logic, register a new callback in QDF which
simply calls wlan_hdd_validate_context() instead.
Change-Id: If533d72725b4cc9dbe5e4b9c25e499657c8e1376
CRs-Fixed: 2308771
Do not disable the Tx beamformer capability when Nss is set to 1.
FW would check the current chainmask configuration and enables
the Tx beamformer capability accordingly.
Change-Id: I8709147c63f2990f135d098fdf13fc3d9b00d7bc
CRs-Fixed: 2305772
In function ol_txrx_offld_flush, check for pdev being
NULL, before de-referencing it.
Change-Id: I8999d894c74b6ef10cef91345370d859f5eee8ec
CRs-Fixed: 2299780
Fixed the naming conventions of APIs and files for MLME component.
Internal MLME component only APIs are in wlan_mlme_main.h/c files
under core.
APIs exposed to other components are in wlan_mlme_api.h/c files
under dispatcher.
APIs exposed to HDD are in wlan_mlme_ucfg_api.h/c files
under dispatcher.
mlme_init/deinit, mlme_psoc_open/close are called from HDD,
so made that as ucfg APIs.
Change-Id: I049008ceaa86ca52acd3ad9a02f903a732117d1f
CRs-Fixed: 2309276
In case of recovery of SAP after SSR, driver is not updating
params for secondary channel as per primary channel (Operation
channel) for SAP.
Update parameters for secondary channel as per primary channel
before SAP start.
Change-Id: I2da2eff62881fe4e65208be778618d0b9c05bf88
CRs-Fixed: 2292645
