Currently the HDD code uses a variety of logging APIs. In
qcacld-3.0 HDD should converge on a unified set of logging APIs.
Update wlan_hdd_ocb.c to use the unified set of APIs.
Change-Id: I7ec58632a781024fedba46ff25baa873ac52bd9a
CRs-Fixed: 937672
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 7 set the HDD_DISALLOW_LEGACY_HDDLOG flag so that no future
changes can introduce new instances of legacy logging.
Change-Id: Ia76d147a57bbc2f1361f8574d226447d0e4c8408
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 6 update the following functions:
__wlan_hdd_cfg80211_stop_ap()
__wlan_hdd_cfg80211_start_ap()
__wlan_hdd_cfg80211_change_beacon()
Change-Id: I173579cb7ba6fc1baa7e6667f06bf642e961b5bb
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 5 update the following functions:
__iw_softap_stopbss()
hdd_softap_get_sta_info()
__iw_softap_get_sta_info()
__iw_set_ap_genie()
__iw_get_softap_linkspeed()
hdd_init_ap_mode()
hdd_wlan_create_ap_dev()
hdd_register_hostapd()
hdd_unregister_hostapd()
wlan_hdd_set_channel()
wlan_hdd_add_ie()
wlan_hdd_add_hostapd_conf_vsie()
wlan_hdd_add_extra_ie()
wlan_hdd_cfg80211_alloc_new_beacon()
wlan_hdd_cfg80211_update_apies()
wlan_hdd_config_acs()
wlan_hdd_setup_driver_overrides()
wlan_hdd_cfg80211_start_bss()
Change-Id: Ibaf0dbb2af0928bf4dce5a475df7e536d85d1451
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 4 update the following functions:
__iw_softap_getparam()
__iw_softap_modify_acl()
__iw_softap_set_max_tx_power()
__iw_softap_set_tx_power()
__iw_softap_getassoc_stamacaddr()
__iw_softap_disassoc_sta()
wlan_hdd_set_force_acs_ch_range()
__iw_softap_get_channel_list()
__iw_get_genie()
__iw_get_wpspbc_probe_req_ies()
__iw_set_auth_hostap()
__iw_set_ap_encodeext()
__iw_softap_setwpsie()
Change-Id: If2388fbdaf5988bd1864443f58594098c44bf837
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 3 update the following functions:
__iw_softap_setparam()
__iw_softap_get_three()
Change-Id: I5db86f54bcc978d7935873423fa1e91bc83d7a2e
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 2 update the following functions:
hdd_softap_unpack_ie()
hdd_softap_set_channel_change()
__iw_softap_set_ini_cfg()
__iw_softap_get_ini_cfg()
__iw_softap_set_two_ints_getnone()
Change-Id: Ia755a63c7154253a02b395fa60f8d3ef82628bba
CRs-Fixed: 937661
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_hostapd.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 1 update the following functions:
hdd_hostapd_channel_allow_suspend()
hdd_hostapd_channel_prevent_suspend()
__hdd_hostapd_open()
__hdd_hostapd_stop()
__hdd_hostapd_uninit()
hdd_set_sap_ht2040_mode()
hdd_hostapd_inactivity_timer_cb()
hdd_clear_all_sta()
hdd_stop_bss_link()
hdd_issue_stored_joinreq()
hdd_send_radar_event()
hdd_hostapd_sap_event_cb()
Change-Id: I5ba28609a7859472bfe08517260364f286f068f4
CRs-Fixed: 937661
qcacld-2.0 to qcacld-3.0 propagation.
oem data request len size should be of 4 byte instead of
1 byte.
Add changes to correct len size in oem data structure across the
layers.
Change-Id: I9b377420c50ff1160964f94be5eaa0072df0f63d
CRs-Fixed: 1013488
Propagation from qcacld-2.0 to qcacld-3.0.
WMI service flag for flash read / write support.
Change-Id: I896b4b53f596df96ec7f023b9301f6a695cd325a
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
WMI pdev params to specify retry limit for control frames, and
propagation delay.
Change-Id: I9662d4cfee0910706486ae1709749aacd938fa3c
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
WMI interface change for DBS roaming and CSA roaming.
Change-Id: Ia483de75c1ea7caa6526aaddd15886fe6a4404bd
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Add scan flags for half and quarter-rate channels.
Add WMI service bit for commands pertaining to Host managed
RX reorder.
Change-Id: I2baf13e0ab8f669153b0fb66f2b286c40f1fcc20
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Add support for setting hardware mode within WMI_INIT_CMD
Change-Id: If5855fb1f1bc2a85fd27a34575a009b9f6b1e008
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Add mcast filter set/delete command that can take multiple
filters in a list.
Fix HTT typos to make MACROS consistent with the field name.
Change-Id: I97ca72f102faecfc3d20409b0d4819a09968417c
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
New WMI command for reorder queue setup/removal
Change-Id: I31ad0432a0d5f49eed55603ae7d9eeedbdd19876
CRs-Fixed: 865207
The chain mask in policy manager connection table needs to be updated
with the capability that HW advertises at load time intersected with
related ini configuration on host. The dynamic change of the chain
mask & NSS values will be handled only by chain mask manager in
firmware.
Change-Id: I250668c93920a63c9278aefe93491cb5aaa91ca7
CRs-Fixed: 1037816
Allow setting of CT window size while enabling P2P opportunistic power
save using the DRIVER command 'P2P_SET_PS'. This removes the need to send
two commands to set CT window size: 'P2P_SET_PS 1 1 -1' to first enable
opportunistic power save followed by 'P2P_SET_PS -1 -1 30' to set the
window size. Now, the same can be achieved using 'P2P_SET_PS 1 1 30'. The
change is still backward compatible with user space entities which send
two DRIVER commands to achieve this functionality.
Change-Id: I5f3dbe00f64df123d6947e29bb62b0f8f1524080
CRs-Fixed: 1039946
Change to ensure that the vdev and txrx operations passed to
data path during vdev registration are valid.
Change-Id: I912194184ae65229ddd7243afa58c56f4579959a
CRs-Fixed: 1035414
Kbuild contains several macros in CDEFINES that are no longer used
Removed these macros from Kbuild file
Change-Id: Ib34ada0b2a07b9d428e9b29ad13ce5fe0302d461
CRs-Fixed: 1023225
Remove use of hddLog api calls and use newer hdd logging apis:
hdd_err and hdd_info
Change-Id: Ic9a9dbe393a9a7582a31aa613fb812034819a821
CRs-Fixed: 962367
qcacld-2.0 to qcacld-3.0 propagation
This reverts change Id461e72919911dff2f93ea7210cb41f643a19b33
The existing code is checking for headroom in the skb coming to HDD from
TCP/IP stack and ends up allocating a new skb and skb->data in case there
is not enough headroom. Headroom is not needed to process outgoing TX
packets in qca_cld3.0 converged code for ROME and ihelium.
Besides a CPU hit, the re-allocation is also causing ROME based products
to use bounce buffers when the new skb(data) is mapped for DMA, since the API
for headroom allocation does not use GFP_DMA flag.
Remove the skb headroom/re-alloc logic to fix the issue.
Keep the existing skb_unshare code as it affects TCP TX for ihelium.
Needs further analysis.
Change-Id: I4980e047aa158c5de0f4f2a557c83f4555bca840
CRs-Fixed: 851524
Fix compilation error on disabling the MCC to SCC switch feature flag
FEATURE_WLAN_MCC_TO_SCC_SWITCH.
Change-Id: Id741f86d2e514c5dc5bfa8164ff37f56cd1ca630
CRs-Fixed: 1037396
Buffer overflow condition is not validated correctly in function
sme_update_tdls_peer_state(). This may result in erratic program
behavior.
Add buffer over flow validation to avoid memory access errors,
incorrect results, a crash, or a breach of system security.
Change-Id: I793bd056b32924b484ce7cb264b22c74c8c4cca4
CRs-Fixed: 1035656
FW common files needs to be in sync with host and fw.
Update host fw common interface files with latest version
of FW interface files.
Change-Id: I28dcdabb5b141d00ad0ce482fec74775b22ace85
CRs-Fixed: 1012542
FW common files needs to be in sync with host and fw.
Add changes to compile successfully with latest version
of FW interface file.
Change-Id: I487a18185c406da5c2fb07e2a95cafe4793578aa
CRs-Fixed: 1012542
FW common files needs to be in sync with host and fw.
Correct fw common references in dp layer with latest copy
of fw common files.
Change-Id: I194c25045ca978634027a94bc74f22253b1afc86
CRs-Fixed: 1012542
FW common files needs to be in sync with host and fw.
Update host fw common interface files with latest version
of FW interface files.
Change-Id: Id4585fbbfaeba186075ecc54b35024315d6e0b68
CRs-Fixed: 1012542
Add support for WMI POWER DEBUG command to control mac_core power features
for run time debugging.
Change-Id: I77ad747843cae31de1705b7ce8fa80e18c9ca53e
CRs-Fixed: 1007598
Ensure that the interval field provided by the DRIVER command
P2P_SET_NOA is used while populating the NoA parameters. Make sure
that the interval and duration fields are in TU units.
Change-Id: I9e1e60a0019e90deab36df5d8ba7822dfa4dcae0
CRs-Fixed: 1036494
PNO kernel debug logs are too frequent.
Reduced the log level of PNO messages from error to info
Change-Id: I27166f542889e0d5071ae8c558e0227c51064c5f
CRs-Fixed: 1022820
ol_ctx is NULL by default if NO_BMI is defined. Hence, add NULL
check for ol_ctx in bmi_download_firmware so that this NULL pointer
could be handled properly in BMI and NO_BMI cases.
Change-Id: I17b6a7e266e41b1f9135bb81bf4329c1ae460862
CRs-Fixed: 1038414
Enable the early stop scan feature by default and also
modify the default values as per the request from the
firmware
CRs-Fixed: 1036474
Change-Id: I0f2596633084ea97e64fb2c7d9975052d1ac98fb
