Use LEGACY source if any of the below use cases is met:
EAR, PBR OFF, IDLE, NG2 and PA GAIN <= 13.5dB
Use PRE-LA when: All other cases
Change-Id: Iace0c1f6fea367a73cd604b958bd5c8905d29509
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Interrupt from wsa883x are not handled as slave_irq is not set.
Add slave_irq for wsa883x to address this issue.
(cherry-picked from commit ddfc43e7c48dcbe9bbae45b5caacdd5bca441800)
Change-Id: I6b56aa88cca895e4e0e5871a7478f6859d45b03f
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
regmap_irq_chip->irq_drv_data is shared by all attached wsa
devices and point to last probbed wsa device. This will cause
interrupt handle issue. Update irq_drv_data per wsa deviece to
resolve this issue.
(cherry-picked from commit 1852682fbcebfb9f479c3d09a91c075049b90253)
Change-Id: I6ac0520a4074d74dfb28122e06eed6a86374c0ce
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
PA_ERR can happen during speaker path setup. Log the
error status in the interrupt handler and clear the error
status for next audio playback to resume properly on
the speaker.
Change-Id: I0490d4cdd6379ed779ce7f54ec8b56d5a7af0649
Signed-off-by: Phani Kumar Uppalapati<quic_phaniu@quicinc.com>
Update to 5.15 kernel dapm api.
Pin name no longer needs prefix as it is added in API.
Change-Id: Ibf967dd01a36decdf904eff9d5af2e315aa53f1c
Signed-off-by: Kunlei Zhang <quic_kunleiz@quicinc.com>
Only UVLO_irq, PA_ON_ERR_IRQ and PDM_WD_IRQ are enabled
on wsa883x. Enable all other IRQs to monitor if WSA is in
bad state.
Change-Id: Ia78f12520eda4b26c00776583a78b14b74771e0e
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
With current setting for VBAT_ATTN1/2/3, pop is heard when
battery is low. Update default value for these registers
to resolve pop issue.
Change-Id: Ic4002a4b30ecd04b04001ca5f16bac5745a803d7
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Add dummy PCM backend definition for virtual devices.
This is being added to support echo reference capture.
Change-Id: I7830f9adf963397d06b837add3f9e1c0fe31563c
Can now set these registers during init once these values are
acquired.
Method called again before playback in case there are
speaker/recv changes.
Change-Id: I1b544633a660e98acadf94b9589b7656edebdd56
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update version value to match swrm HW_Version register
Fixes an error message seen in logs.
Change-Id: Ia2d6f97b8f11305d73705e2c401af1f013af94bc
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update mode argument type from int to u32 to avoid
any potential data loss since input is also u32 type.
Change-Id: I9541a7da20d2a22a0066622736268adffde5adbf
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Whenever there is an interrupt,
mute the PA, then wait 1ms and unmute the pa and
check for another interrupt. Then if there are still interrupts,
retry muting and unmuting the pa with delay.
If interrupts persist, the PA will remain muted until there is a
usecase teardown or reset.
Change-Id: Ic59fc33d4606c1c630a61796d513a9ec99a4979c
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update to latest sequence from WSA hardware systems team.
Add writes for VADC, BG, Boost
Change-Id: Ic61e1c36154ff673fce05546332e89fe683a3075
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add new lpass RX paths. Needed to fix
WSA ADIE Loopback.
Update DAPM enum length to include these RXs.
Change-Id: Ie174cfab20b8beb103eefa94636e76ad756c7345
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Enable CONFIG_MSM_EXT_DISPLAY and link external display module
in audio to enable displayport audio.
Change-Id: I43f8821ec7612422b6a09c9631b038ceb17b1e44
Add to avoid crashing related to device tree parsing
of SWR port params.
Change-Id: Id839cc908fb5f7843e5fd6260b3205c8844349ba
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Found potential issues relating to uninitialized or out-of-bounds variables
present in codec drivers. Place checks to ensure proper ranges are used.
Change-Id: Ib68cba2413788a57237f1f18fc5ce5fb5c6bfb0a
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
FIFO_Flush should only be for SWRM_INTERRUPT_STATUS_CMD_ERROR.
For other usecase, it should not be flushed otherwise it would
cause register write mismatch and cause some sideeffect.
Change-Id: I6d40a30129dfdf48993125fb57042ab97a13a631
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
For PBR and CPS ports, need the ability to customized slave
SWR frame OFFSET1 settings. Add similar method to WCD TX where
offset1 and lane_ctrl parameters are parsed from WSA device tree
and configured in SWRM.
Change-Id: Ib973ed93d9daa5ba02461a156e5b0a8c816d371e
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update HSTOP from 0 to 8 to match configuration.
Also fix slave ch en from 2 ch to 1 ch.
This fix resolves port collision/bus clash issues.
Change-Id: I91c6fe80a9db88d029e4ef81c7a06480a767b170
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
For all FIFO_WR/RD_CMDS, add function that increments cmd_id
every time for easier sw debugging.
Change-Id: I53d133d9b427dd6b80201aab3c6f367600e82bfc
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Slave reg SAMPLE_CONTROL_2_BANK (0x23) should only be written
when sample interval is > 0xFF otherwise we get CMD_Ignored IRQ.
Also add handling for this CMD_IGNORED_AND_EXEC_CONTINUED Irq.
Change-Id: I4693fb17ba78c73d4fda2e4ddce9fa6e0311309d
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update to 5.15 kernel dapm api.
Pin name no longer needs prefix as it is added in API.
Change-Id: I5c1378839f4c4d2aa70fb11706c5bb65d4eb0952
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update function to correctly read array from device tree.
Previously not reading values and returning -EINVAL.
WSA bat_cfg/rload/sys_gain are now correctly configured.
Also add softclip clock enable during pbr config.
Change-Id: Ia1b93acfde3e799b3b72e05966d0fa955c3f49ac
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Local variable is used for dma_vmap and same value is used for caching
which becomes invalid after going out of scope. Store in heap instead.
Change-Id: I2e291137dd461d0cdb49209a6c1d804f1e806457
