For testing purposes, expose the ability to override the interface pause
setting sent to firmware during WoW enable. Relatedly, allow userspace
to specify which wakeup trigger firmware should use, instead of assuming
HTC wakeup.
Change-Id: I265ccef7ca5304c94bcb5ff2eb9a3d35cfa74191
CRs-Fixed: 2011131
PE is sending the deauth frames to all the connected tdls peers
while processing the deauth frame on STA interface from AP. But it
is not deleting the TDLS peer.
This change is to delete the tdls peer after sending the deauth frame
to tdls peer.
CRs-Fixed: 1108945
Change-Id: I0e115bf005e7d3bb3102f170f0d614160b9a0e38
During wifi-on the framework will load the driver and starts the
supplicant. In the present scenario, as soon as the driver registers
with the platform driver it checks whether FW_READY indication is
recieved. If the FW_READY is received the platform driver calls
probe of the driver in same context of the wifistate machine. If
the FW_READY indication is not received it calls the probe of the
driver in the work queue context. This is resulting in the wifi grey
out in the UI.
So, wait for the driver probe completion in the module_init, before
returning the context to framework.
Change-Id: I21b70f7e383bde07ac8cc3d4969be18b840d26a4
CRs-fixed: 1112295
On roam, obss scan params, sta ext capabilites and
qos map set are not updated to pe session entry
before returning from lim_process_assoc_rsp_frame.
Fix is to copy QoS map set, update obss scan params and
sta ext capabilities in PE session entry before return.
Change-Id: Iad35491c04452b6d459dde94713fc9c627c098e1
CRs-Fixed: 2007784
During legacy serialization's code review, few comments were provided.
Fix them.
CRs-Fixed: 2005532
Change-Id: Id5daea23532f263aea1e1bb9c3daa4651274890f
Legacy SME module is using old serialization mechanism, enable new
serialization mechanism.
Provide ifdef switch to fallback to old serialization in-case if it
is required to move to old serialization.
CRs-Fixed: 2005532
Change-Id: I4801dbab53e451206e2ff0904d102676fd7336e2
There is new legacy serialization MCL file added to serialization
module which needs to be compiled for MCL platform and needed to
add reference in SME module.
CRs-Fixed: 2005532
Change-Id: Id946a62f6e0dec4531deccc83dae6373d396a91a
qcacld2.0 to qcacld-3.0 propagation
1) Roam enhancement change needs to handle the case of White list
SSID value count can be zero. This zero count is reset mechanism
to clean up the existing configuration.
2) The Blacklist BSSID count can also be zero and used as reset of
existing list.
Change-Id: I9c753b571138ab7533e6e897b820ca1db72c3880
CRs-fixed: 2007708
Move cfg ini based WMI pktlog enable command from hdd_wlan_startup
to hdd_wlan_start_modules during DRIVER_MODULES_OPENED state.
After hdd_wlan_startup, host starts the interface timer and if this
timer gets expired, then driver closes all the modules and cut down
the power to the chip.
On iface up, power on happens and modules are started again, and all
WMI configuration needs to be sent again to FW which happends as part
of hdd_wlan_start_modules.
CRs-Fixed: 2009995
Change-Id: I6d72e896532a6443150b1754d93ae06bf2edc3b3
Move cfg ini based WMI cts2self enable command from hdd_wlan_startup
to hdd_wlan_start_modules during DRIVER_MODULES_OPENED state.
After hdd_wlan_startup, host starts the interface timer and if this
timer gets expired, then driver closes all the modules and cut down
the power to the chip.
On iface up, power on happens and modules are started again, and all
WMI configuration needs to be sent again to FW which happends as part
of hdd_wlan_start_modules.
Change-Id: I50183b65c88b5b5fec6a09f93dc2c86d39f48039
CRs-Fixed: 2010097
For some channels, Reg power is more than MAX supported TX power.
Driver should not populate max tx power more than 22.
Change-Id: I52557bd0c38c128c09b255b46f7d43986d50feff
CRs-Fixed: 2010014
wmi_desc cleanup for UMAC convergence as mgmt_txrx_desc
to be used in place of wmi_desc.
Change-Id: I48c1b965096610373a850fcf834288a15bd2ad19
CRs-Fixed: 1103247
-Initialize and free os private structure in pdev object
-Move vendor command definition to common project.
Change-Id: I9b8501d042afe1c967bfbfef81c01c0382a67531
CRs-Fixed: 2002991
As part of stop_modules hif_ctx will be freed and re-allocated
as part of start_modules. So the target_name pointer in the hdd_ctx
points to a invalid memory.
Mitigate this issue by updating the target_name,hw/sw info during
when the driver_status moves to opened state.
CRs-Fixed: 2009308
Change-Id: I73d2f7537e1ff2a4dd735e1af85473b64c2bf1ae
Send beacon frame in wmi_roam_invoke_cmd to firmware.
This helps firmware skip scan to connect to requested
BSSID.
Change-Id: I5c6e375309dcb3bdd6430a3d501bade5cfe2e88d
CRs-Fixed: 1116901
