multipass_rx_pkt_drop is peer level stats counter
used to count multipass rx packet dropped frame.
Accumulate this counter at vdev and pdev level.
It also initializes multipass_en flag to false at
vdev attach.
Change-Id: Idaa85a71c80eefb9359abb026402b71aa28ad6a2
CRs-Fixed: 2595551
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
A build error happens if "%lu" is applied to a size_t variable.
Change the format to "%zu" in dp_print_tso_stats().
Change-Id: Ib9e7ff5de91a8d5de091f8adae003f0ce0258acb
CRs-Fixed: 2560138
Memory leak fixed in dp_rx_tid_delete_wifi3 in the case
where update cmd send fails. Add the desc to the front of
free desc list and set a flag to ensure that the update
cmd is resent from delete rx_tid callback. In the same
callback ensure that the update cmd desc is sent out first
and then proceed to free other descs by sending out the
flush cache cmd for each of those descs.
If the flush cache cmd is not sent successfully to REO,
add the REO descriptor back to the free desc list and
defer the deletion to the callback function. This update
is made under MCL feature flag REO_DESC_DEFER_FREE.
Add a soc level stat to indicate the reo send cmd failures.
Change-Id: I4e4cf47223d5325a53f2df22571895489d033ba3
CRs-Fixed: 2551028
Add support to account for TSO jumbo packets on the
Tx path and print the statistics using dumpStats 3.
Change-Id: I6cc446df5c84e3ac436d922935fcd559e0704ec5
CRs-Fixed: 2356244
Check if REO ring is near full at the end of dp_rx_process. In case the
ring is near full, reap the packets in the ring (and replenish, send to
upper layer) until the quota allows. Ignore the HIF yield time
limit in such cases.
This change is needed to prevent back pressure from the REO ring(in case
it gets full). Backpressure from REO ring (to LMAC) may lead to a
watchdog and eventually a FW crash. Hence, avoid such a scenario by
reaping as many packets as the 'quota' allows when the REO ring is in
aforementioned condition.
A sid-effect of this change would be that at times the RX softirq may run
longer (till the quota limit) than the configured HIF yield time.
However, this logic is not expected to kick-in in perf builds. The issue
is reported for a defconfig build where lots debug options are enabled
in the kernel which can slow the processing down.
Change-Id: I2eb6544c159ec5957d10386b1750fd96473fe13a
CRs-Fixed: 2540964
added stats counter to check invalid release reason other than
FW and TQM in tx completion path.
added assert to make sure host is not releasing descriptors with NULL
address.
Change-Id: I3a30bd0f0c3954ed6435489d9b21f16201d1b840
Pass pdev to dp_peer_stats_notify API instead of de-referencing
this from peer structure.
Change-Id: I5dc679283f5822f44b4140aefb3aee44a826c720
CRs-Fixed: 2500647
STATUS_DONE is missing sometimes in monitor status ring,
but logging for each entry in the ring increases the time
for which the hal_ring access lock is held. If there are
many entries in the monitor status ring, this can lead to
the hal ring access lock being held for too long and cause
inconsistencies.
Reduce the logging level of the tlv tag STATUS_DONE errors
and have a counter for the cases when this happens.
CRs-Fixed: 2502422
Change-Id: Ica77ce62bbe2c6b7691d638ac44ab0452dd2fd97
MDNS packets if forwarded for a NAN vdev can lead to potential flooding
of the air interface. Hence donot forward them.
Change-Id: Idfdedfb0b5b553745440587448230013f3b56a7d
CRs-Fixed: 2503360
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
Add tx device limit configurable from INI.
This is used to limit the overall tx descriptors used in the device
Change-Id: I51e9611ca14bdc146de914317b38b98329130c9f
Add dp_tx_desc_limit for 5G high, 2G and 5G low to limit the
number of software tx_desc to be allocated.
Change-Id: If97e858b73aafaed0e21fc8f6e0337e467ce0ecc
Printing ring stats from requesting txrx stats needs access PCIe link
so make sure it is resumed by doing a sync resume if it is runtime PM
suspended. Also response of h2t_ext_stats_msg from FW is not guaranteed
so tag it properly so that in HTC layer, corresponding "put" API will
be called right after sending the packet.
Change-Id: Idc5797b38557ed5779d920c72200b9d28769ab58
CRs-fixed: 2487521
Rssi_in_dbm has incorrect format specifier due to which
it returned large values,change it to correct specifier.
Change-Id: I06426e36b6abf5b915d039dfea8afd5d3aa06195
CRs-Fixed: 2490087
Size of rx_pkt_hdr tlv structure is used to check if there is enough
space in the SKB to add radiotap header.
The issue is seen due to a single SKB can hold the multiple TLVs and
the next subsequent SKB has the data. In this case, there is no headroom
available in the second SKB. Therefore crash seen while adding the
radiotap header in the second SKB.
To fix this issue, check if the SKB has enough headroom space. If not,
drop the frame.
Change-Id: Icd11f946c0aee974dde2ef21f59cfe3d8b87fa5d
CRs-Fixed: 2480719
Deliver RX data to stack even if no peer found, this is
needed for LFR roaming case like eapol data.
Change-Id: Ic81f29993fb4542847bd076042a13de6e9f18173
CRs-Fixed: 2468082
In some case, HW will fill in unexpected peer_id into RX PKT TLV,
if this peer_id related peer is valid by coincidence, but actually
this peer won't do dp_peer_rx_init(like SAP Vdev self peer),
then invalid accessing to peer rx tid will happen.
do SW WAR that add checking about peer tid array, if not initialed,
free the rx nbuf.
Change-Id: Icf196b4f92eb341e1ace5128c681d24c41dff6cd
CRs-Fixed: 2468537
Currenly this function, is_sa_da_idx_valid(), called from dp_rx_process
does not take MC/BC packets into account. For broadcast packets e.g.
DHCP offer packets from some APs, this check may fail (incorrectly).
Thus dropping the broadcast packet, when it should have been passed
on to the stack.
Fix is_sa_da_idx_valid function by taking MC/BC packets into account.
Change-Id: Ibbb34134e997e0d5394dfa654be84b9fa43434a3
CRs-Fixed: 2466839
write module specific macros inside module/config and
use these inc files inside the kbuild of the module using those
macros.
Change-Id: Ide18770973f35d0e5c45e2474b24256107f40d8c
Non raw traffic gets enqueued to VAP in raw mode
and incorrect fc.type causes HW fault.
Lets proceed only if raw frame is of type data.
Change-Id: I9f0d608cd1b319feb9af642969b258aab813645f
CRs-Fixed: 2434391
Tx completion stats should be counted per wbm ring on tx completion
and not globally. Similarly, rx stats should be counter per reo ring.
Change-Id: I1e4af0d38b23e60de78ca03316861db08ff0811a
We need to read all MSDUs of MPDU in single reap for RAW mode
to prepare the complete SG list
Change-Id: Iaf2d0b9f32bf10181ce7646bf60c4d7e70aed36b
CRs-fixed: 2320143
1. Move statistics API's to dp_stats.c
2. Move DP_TRACE_STATS to DP_PRINT_STATS
as it is implemented based on target.
Change-Id: I62f3076a51ca35f0e12cdb0ff0230ea87c2baaf7
CRs-Fixed: 2453443
Identify the WIN/MCC specific features. Move the features under feature
specific flags. Get rid of WIN/MCC specific code.
Change-Id: Iaf4e5befd7d574a20bea5c078201adbeac3b762c
1. Reduce trace level of stats from fatal to info_high
2. Move stats APIs to dp_stats.c
Change-Id: I0b27a254075610fbbafcc8b09b72403ccb83473a
CRs-Fixed: 2446189
Print OFDMA tx and rx rate stats received
from firmware as part of txrx_stats 9.
Change-Id: I081016480bdb0d161e33be7ee789497c43ad6cc0
CRs-Fixed: 2415731
Do not print rate statistics on the console or kernel logs. Excessive
logging in kernel messages can lead to kernel panic.
Change DP_PRINT_STATS to not print in kernel logs.
Note that this is an interim solution. Ideally these prints from DP
module should be QDF_TRACE_LEVEL_DEBUG and logged to QXDM. Currently
DEBUG trace level is disabled for DP module.
Change-Id: I54af98eda0dd4ea53ae20f25ced6b03287d8b4e4
CRs-Fixed: 2414635
For low mem config, use user configured max tx descriptors to limit the
allocation of software tx descriptors.
Use dp_txrx_pflow_update_pdev_params function to print stats and to update
pdev param.
Change-Id: I8fa6f0bb8841de68e8dc205ffcb0fde264f1b0e0
CRs-Fixed: 2414452
Replace %d specifier to %u for unsigned int variables in stats
outputs.
Previously, %d would cause uint32_t values to roll over to
negative values.
CRs-Fixed: 2402160
Change-Id: I3d3c02ac44a38d311e8e8e0e933af79f362f42b7
Currently there is not STA inactive time support for lithium.
Read inactive_time from htt_peer_stats_cmn_tlv by sending
HTT_DBG_EXT_STATS_PEER_INFO to firmware.
After sending command, wait on completion variable till
firmware to response, trigger completion upon firmware response.
CRs-Fixed: 2319219
Change-Id: I93e6343641ae5c72610a57dd6ba551cca0b010c1
